BEE - prepare badge/label artwork for printers

PLEASE DO NOT START ANY WORK UNTIL YOUR QUOTE IS ACCEPTED FOR JOB!!! Prepare simple artwork for badge/label printing. Rectangular badge ratio is 4:3 with very small corner radius. Artwork will have 3 different colour backgrounds BLUE RED GREEN and 6 different top headings BEEHIVE SERIES BEEHIVE CHARGERS POWER SYSTEMS BEEHIVE POWER BEE BATTERIES POWER & ENERGY Please ask for exact details before quoting. All TTF files are available for the BEE symbol and text. Technical Information: File types: • Illustrator(Ai, Eps), • Photoshop(PSD, TIF or JPG (300DPI), • Acrobat PDF(pdf) • All images should be converted to CMYK colour mode. • All fonts should converted to outlines. • Line thickness should be thicker than 0.3 pt. Text: converted to curves / outlines. Paths: converted to curves / outlines. Colour mode: must be CMYK (not RGB) Trim Marks: all print ready artworks must have trim marks. Vector Graphic Files - vector-based images can be scaled by any amount without degrading quality. Usually supplied in EPS, PDA, AI or CDR formats. Resolution: colour & greyscale raster images (pixel-based/scans) should be 300dpi,(350dpi maximum). All non-vector images (e.g. photos) should be converted to bitmaps at 100% scaling and 300dpi resolution. Resolution: mono raster (bitmaps) should be 1200dpi maximum. Bleed: 5 mm external bleed - anything that touches a trim edge must be extended 5 mm past it. Bleed: 3 mm internal bleed or type area - we recommend you keep all important information al least 3 mm in from the trim. Borders: we recommend not using borders less than 3 mm wide on the trim edges. Layout: use separate (single) files for each side of each job (eg. 2 sides = 2PDFs: 1up front and 1up back) Black: avoid four colour blacks in vector files - but do add 30 to 50% Cyan to 100% Black for a deep black. Please ask for exact details before quoting.