hi need solidworks person to do some solid works fucntional drawings

₹1000-7000 INR

已关闭

已发布

大约 5 年前

₹1000-7000 INR

货到付款

Looking to have someone design the following light. a solid works drawing of the light for the tree, A light rail (The strip of lights that extends the distance from the trunk to the end of the branch) that will be mounted on the trunk off an artificial Christmas tree approximately 3 inches in diameter, the light rail will have multiple lights on it extending from the trunk of the tree out ward parallel to the floor, the lights will extend from the trunk with the ability to be hooked on to the branch for support, The light rail will then connect to a connection that will clamp on to the trunk for easy removal, this connection will have a ribbon cable that will have the ability to plug into the next set of light rails for the branches above, and so on until all branches have lights under them. I am assuming the following dimensions. Light Rail 1- (Lowest branches) 8 light rails extending 4 feet out. LR 2- 8 light rails extending 3.5 feet out LR2- Ect.

3D Modelling

CAD/CAM

Mechanical Engineering

Product Design

Solidworks

项目 ID: 18950043

关于此项目

25提案

远程项目

活跃5 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

25威客以平均价₹4,284 INR来参与此工作竞价

@Yohanesujang

Hi, I'm Ujang from Indonesia. I'm RnD mechanical engineer/Product Designer. I'm not only making the design, but I know that my design is manufacture-able because I have many experiences in manufacture: CNC milling, Lathe, Sheet metal fabrication, 3D printing parts design, plastic injection product design, CAM (One CNC), Solidworks Please check my profile for some winning contest I won. I hope we could work together. One more thing: I am not subcontracting engineer, I do all the process by myself, so the response will be much faster and available to call via phone, message etc, but please schedule the time... Regard--Ujang

₹7,777 INR 在1天之内

4.9

(43条评论)

7.0

@aditya099

I believe i understand what you explained. I would like to discuss a few more points regarding the lighting and tree. Look forward discussing it with you.

₹5,000 INR 在1天之内

5.0

(55条评论)

6.5

@krupal599

Neocent / Technoledge focuses on building strong customer relationships by providing exceptional service with integrity, honesty and fairness, while paying close attention to completion deadlines and budget requirements; along with maintaining the highest standards of operation throughout all project areas from start to finish. Our Services: - Engineering Design & Drafting -CAE Services: CFD and FEA - Reverse Engineering - Rapid Prototyping and Product Design - Value Engineering and PLM Services - Technical Documentation At Technoledge, we aim to achieve our vision by placing emphasis on ensuring that our offerings meet the following criteria; Agility, On time Delivery, Superior Quality, Cost Effectiveness and Great Efficiency. A continuous learning culture amongst the team enables and guarantees continuous innovation in the business. WAITING FOR FURTHER DICCUSION. THANKS

₹4,444 INR 在10天之内

4.9

(50条评论)

5.7

@bchandra1955

Professional engineer with his SOLIDWORKS team can help you. Rate will be as per part list.....................................................

₹2,500 INR 在10天之内

4.4

(58条评论)

6.0

@thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time and free revisions and required. Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message.

₹11,111 INR 在10天之内

4.7

(33条评论)

5.7

@Mish1106

Hello, I am Mechanical Engineer, Working as product/Industrial/CAD designer from past 8 years. I am having good expertise in solidworks ftom past 8 years. I can help you out. Thank You.

₹4,444 INR 在2天之内

4.9

(45条评论)

5.3

@mohsamehahmed23

Hello there!!!! my name is Mohamed sameh from Egypt , I have a diploma and a master's degree in mechanical engineering. I am skilled and specialized for 8 years in some programs and skills: - - cad / cam and 3d modelling programs (AutoCAD - Autodesk inventor - solid works, etc.). - Drawing and assembly of 3D parts. - 3d rendering and surfacing. - buildings design, Structural Sheet Metal - 3D max - interior design I am flexible in dealing with clients and concern with their needs. I ready to rework any part in project to achieve satisfaction for them. CUSTOMER SATISFACTION IS THE FIRST PIROURITY FOR US CONTACT US FOR YOUR PROJECT!!!!!!! See My Portfolio BE HAPPY

₹3,333 INR 在1天之内

5.0

(20条评论)

4.2

@okarer

Hello there, First, I am a Mechanica Engineer with a wealth of industry experience. Providing Engineering drawing from the basic sketch-NO problem! Modeling Product-No Problem. Re-designing if necessary- No problem. Rendering Suitable File Output- No problem. Basically, I can get the job done for you ASAP. Availability- Ready to begin straight away. Regards, Mechanical Design Engineer.

₹2,250 INR 在2天之内

5.0

(8条评论)

3.2

@alexandersolomon

Hello there !! I am Alexander and I believe I can do this freelance job as I can provide swift and efficient Engineering services in Solidworks & CREO and I believe my services would create a long lasting impression Moreover If I get to work with you in this project You will see the skills I exhibit and you will look forward to partner with me in your future projects!!

₹5,000 INR 在1天之内

5.0

(1条评论)

2.5

@trehman000

I am a mechanical engineer by profession and I can use Solidworks pro-efficiently. I have completed many projects in solid works from basic to complex modelling and assembling the parts. You will be happy with my work.

₹5,000 INR 在3天之内

0.0

(0条评论)

0.0

@brennanmcd1

I'm efficient and skilled.

₹3,333 INR 在3天之内

0.0

(0条评论)

0.0

@MGBomade

Hello, I am a mechanical engineer I have good experience in 3 D software and autocad. Pl share the details of the project. Pl confirm the output file format that will be required by yourself. Thanks & Regards M G Bomade

₹5,555 INR 在5天之内

0.0

(0条评论)

0.0

@saif816

I am an HR Professional and have experienced profressionals from all fields, including Mechanical who are best at designing using AutoCad, Catia, Solidworks etc.

₹3,333 INR 在3天之内

0.0

(0条评论)

0.0

@devvratsompura

My Name is Er. Devvrat Sompura. I am here to bring your product to life. I'm a Mechanical Engineer. I am working as a Designer and 3d Modeller from last 4 Years. I am Also expert in 3d printing. Work Type: 3d printing, 3D modelling, 2D, Sheet Metal, Machine and Devices Design, Product Design, Plastic moulds and plastic parts, Analysis. I have very good knowledge of 2d & 3d Softwares like AUTOCAD, SOLIDWORKS, CATIA, 3DSMAX, Keyshot. I would like to do your project and I will provide you with the best result. For Further Discussion of your project Please Feel Free to contact me.

₹5,000 INR 在6天之内

0.0

(0条评论)

0.0

@sahilbhatt028

i have good experience with solidworks 22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222

₹1,750 INR 在2天之内

0.0

(0条评论)

0.0

@rmano94

Hi I'm Mano. I'm New one on freelancer. I know solid works very vell. Relevant Skills and Experience I am work in company on design and manufacturing

₹4,444 INR 在5天之内

0.0

(0条评论)

0.0

@tdartnell

Hi I would like to offer my services regarding your Project and would require more information in order to give you a firm price. Please fell free to contact me for further information. I design in Solidworks 2018. I have a small Design and Prototyping Company. I also work in Aluminium, Mild Steel, Wood and Plastics. We have the following Machinery. CNC Router CNC Mill CNC Plasma Cutter CNC Laser Cutter CNC Hotwire Foam Cutter Traditional Mill and Lathe. We CadCam with Solidworks and Vectrics Inspire & 2dCam. Regards Toby

₹3,333 INR 在1天之内

0.0

(0条评论)

0.0

@jorgedx25

Hi, im interested in your project. i have experience working with the most known CAD softwares like Solidworks, Autocad, Inventor. With knowledge about 3D solids, Mesh, Sheet Metal. I can transfer any idea from my imagination to this softwares and give you a result with the required standards/Quality and in Time.

₹3,333 INR 在3天之内