Find Jobs
Hire Freelancers

Arduino Security for Motorcycle

$30-250 USD

已关闭
已发布超过 7 年前

$30-250 USD

货到付款
Looking to complete my motorcycle security project. I have attached a text file with all the parts and senors I ordered already. Here is my general project: -Project sends you an text/email alert when the sensors goes off on the motorcycle (shock, movement, gps, vibrations, and proximity/perimeter, and any other ones that I'm missing) -We can run an external battery, and have us know the percent on the web interface. -I don't know if this is possible, but since every sensor will have an assortment of different of values (value of at-rest, value that triggers), I would like to change the value of trigger via web interface. Example of this: Motorcycle sitting in a parking spot has a tilt value of 5, when tilted past 7 it will trigger. I would like an web interface where I can change the trigger response variable on the fly for better customization. -I would also like to included using an remote wireless keyfob (315MHZ) to alarm and disarm. Also have it so which ever sim card I have in the arduino, If I text that number "alarm", or "disarm" to that number, it will do so. -Bought a speaker, when I it's alarm it will send a beep, when I press/send disarm it will send two beeps. -I bought an GPS module, would like for it to post the data to the web interface at a trigger moment. For the web interace, I would want it to be similar to: [login to view URL] But with less of the gimmicks. Would like it to display the battery percent, device status, and view bike location at a click of a button. I would like to set all the variables on the web, this includes all the sensors varibles (low to max), which security features I want on and off, contact numbers for the device to text. I haven't ordered the perimeter sensor, for an example of what I mean, this video at around the 5 minute mark: [login to view URL] Don't know if this can work, [login to view URL] Ideally, this perimeter/promixity sensor would be placed in an enclosed box, underneath my motorcycle seat. The point of this sensor is to alert me when someone is near my motorcycle. If I need to order more parts, you would let me know what to order.
项目 ID: 12001563

关于此项目

23提案
远程项目
活跃7 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
23威客以平均价$386 USD来参与此工作竞价
用户头像
A proposal has not yet been provided
$400 USD 在7天之内
4.9 (150条评论)
7.6
7.6
用户头像
A proposal has not yet been provided
$277 USD 在15天之内
4.9 (158条评论)
7.0
7.0
用户头像
Hi sir We have delivered the similar bike related telemetry systems to our clients in USA. Our delivered systems are matching your requirements to 85% and for rest of 15% we have to work so i think we have near ready solution for you. We offer you our solution at very affordable and comparatively low rates. Please discuss in detail. Let me introduce my team to you and what we offer to our clients. We are team of expert engineers and developers who are sound experienced in embedded systems (arduino + other microcontrollers), programming, circuit designs, electronics, product designs, pcb layouts, database management, MySQL, android apps etc. We will deliver design and code, if you want us to send you prototype, you have to pay additional charges of prototyping and courier such as DHL/FedX etc. We are very friendly in nature and will help our clients during and after projects completion. We are flexible in communications and rates. Very much looking forward to hear from you on this in coming days. Regards, Ahmed Lead Technical Engineer Turktronics
$198 USD 在3天之内
4.8 (45条评论)
6.7
6.7
用户头像
Hello Sir/Madam, I am Anthony Perera from Sri Lanka and I have multiple degrees on Engineering field. Why you should hire me ? * I am a FULL TIME freelancer and once a project is awarded to me,all my time will be dedicated to that specific project so you will get fast and quality work. * I have been in the field of product designing so if you are developing a commercial device I can help you to design it at very low cost and also can get into contact with Chinese manufacturers who I work with. Very reliable and fast. * I have my own PCB printing facility and also a workshop where I can design and manufacture any number of samples/prototypes. In that way you don't have to find some one else to test my work. * My prices are very fair and can be negotiated all the time. I am very flexible and very understanding. You can see my reviews. Check my profile. See for your self. https://www.freelancer.com/u/Anthony989.html Please contact me if you are interested. Thank you Anthony Perera
$155 USD 在3天之内
4.8 (47条评论)
6.4
6.4
用户头像
Hi, I am an electrical engineer and have been working as embedded systems developer for past 4 years. I have developed systems using arduino, STM32, PIC and raspberry pi. I have created a number plate recognition system, driver fatigue detection system and video surveillance system using raspberry pi and pi cam. These projects were very similar to your project. i can complete your project in minimum time and with excellent quality. Looking forward to your response. Thanks
$750 USD 在3天之内
5.0 (20条评论)
6.2
6.2
用户头像
Hello, Good day. we will help you running the hardware. Please feel free to contact us. Best Regards, Shahbaz.
$400 USD 在10天之内
4.9 (27条评论)
6.1
6.1
用户头像
Good evening my name is Manuel, I'm Mechatronic Engineer I saw your project in upwork but I have more ranking here jeje, I'm new in upwork. All from website is possible you need to send the data with one JSON, I can to develop your project and test it, we can to work together too bez you have the componentes, I have an arduino, nodeMCU etc... I can to develop your website and test it localhost (xampp) your project is interesting :) I would work for you. I'm to order. Ing. Manuel C. 100% Freelancer
$222 USD 在15天之内
5.0 (49条评论)
5.7
5.7
用户头像
i am an electronic engineer with more than 10 years of experience. I have worked on several similar arduino based projects and can guide you to set this up and develop arduino and web code. please contact me to discuss details
$400 USD 在5天之内
5.0 (15条评论)
5.6
5.6
用户头像
FREELANCER RECOMMENDED ------------------------------------------------------ Can help... I am an Expert... Lets Start! Please start a Discussion with me and we can get started from there... Please check the past projects I have handled and check my reviews for what employers have to say about my work... Can start right now...
$1,000 USD 在7天之内
5.0 (15条评论)
5.2
5.2
用户头像
Hi, I'm an Electronics Engineering student from Argentina. I consider I'm able to help you. I'm new to freelancer but that doesn't mean I have no experience, you will get from me the best effort to get a job done that meets up your expectations, and receive a good review and rate from you. If you are curious you can check my profile I've completed five jobs already, with good recommendations. If you have any question, you can leave me a message. Regards, Esteban Toribio
$700 USD 在30天之内
4.6 (12条评论)
4.1
4.1
用户头像
Hi! Im an electrical and electronic masters graduate of UWE. I have the experience of programming in C/C++/Assembly/Arduino/PIC C/MikroC/MATLAB for more than three years. I also have the knowledge and experience of ELECTRICAL AND ELECTRONICS circuit analysis and design. I also have experience in embedded systems using microcontrollers like PIC, ATMEL, ARDUINO and most of the other types. I have made different kinds of devices varying from radios to drones and more. I am very keen to work on implementation projects I also have studied Artificial intelligence. Im very thorough with subjects like Neural networks, Fuzzy systems, Genetic algorithms and Expert Systems. I have done BCS (British computer society) diploma level. I have the knowledge on PHP/HTML5/mySQL for website development. I have completed many freelancer assignments successfully. If you are interested in hiring me, please send me a message. I have made a lot of reports in the recent past. I have good experience in using Microsoft office softwares like Word, Excel and Powerpoint. I can write reports of any length without mistakes. Thank you!
$222 USD 在3天之内
4.7 (15条评论)
4.1
4.1
用户头像
With the present modules it is perfectly possible to what you want, for theft the most important is that people should not be able to disable it or steat that system easily, (cannot make it impossible but really very very difficult) Did this more than six + years back but then the modules were very expensive so market was not there, now the modules are cheap (i.e. hardware is now very cheap) Please go through my profile and if you feel interested please communicate. Suggested board Arduino Mega as you will need number of ports ATMEGA328 will need port expanders,hardly worthwhile.
$311 USD 在8天之内
5.0 (6条评论)
3.3
3.3
用户头像
Dear Hiring Manager, First of all thanks for creating an opportunity. Hope you are doing well. I will not propose what the maximum Freelancer do. I dont believe in copy paste Cover letter. I read your project details, if you discuss with me or ask me or talk with me then you can understand i have the better experience the sector you are looking for. I have completed this kind of project more than 10 time. So I can assure you that i can complete your task perfectly. For more it will be better if we can discuss or ask me any question if you have. Looking forward from you. Thanks with best regards
$722 USD 在12天之内
5.0 (2条评论)
1.4
1.4
用户头像
the Digital Microwave Sensor wont serve you will, it has a long detection distance. the minimum distance is 2M.
$600 USD 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello , i am new to freelancer . i am searching for my first job . though i have 7 years of experience in embedded system & iot . basically i make projects for b. tech and M tech students . as i am new here price hardly matter for me . first i wants to make some good review and recommendations . I can make the project in arduino , arm .PREFERRED FOR GSM& GPS is ARM / ATMEGA 328 DEVICES . ONE MORE ISSUE WITH YOUR PROJECT IS THAT YOU NEED EXTERNAL MEMORY . BCZ THE GPS DATA WHAT WE RECEIVE WILL GOING TO TAKE ALL THE MEMORY . REGARDING WEB INTERFERENCE THAT YOU HAVE TO TAKE CARE . regarding delivery time that i can conform after knowing the abstract of the project . hope you can give me a chance to work for you . contact details : +91 70640708960 (whats app) skype : live:pkrr2016
$155 USD 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have worked on 50+ Arduino projects. I read the details of your project, its a great idea and I would love to work on it. Cheers!
$300 USD 在14天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello, We are a team of embedded hardware and software professionals with experience in complete system design, development, prototyping and manufacture. Would like to know more details about the project. Looking forward to work on this project. Please feel free to contact us for any further discussions. Thanks and Regards EmWorld
$250 USD 在3天之内
0.0 (0条评论)
0.0
0.0
用户头像
already worked on similar project
$333 USD 在30天之内
0.0 (0条评论)
0.0
0.0

关于客户

CANADA的国旗
new york, Canada
4.9
20
会员自1月 12, 2015起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。