I need arduino code written to use an ethernet shield to connect an uno or nano to arduino cloud

Hello! I will develop arduino code for you. kindly come over chat and plan the project for the same.............

Hi there,I'm biddin on your project "I need arduino code written to use an ethernet shield to connect an uno or nano to arduino cloud" I have read your project description and i'm an expert in C programming and machine learning therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

Hi Good morning , I have read the brief details on your job listing . I see you have been looking for someone experienced with C Programming and Arduino. Its been 8 years since I have been working on freelancer.com, I have 9 years of experience doing similar jobs. I would request you to check my profile and review projects, feedbacks of projects related to those skills. Questions: 1. These are all the requirements of your job or do you have more? If yes, Please provide detailed requirements in chat and let me review and get back with queries. 2. Do you currently have anything done or this job has to be done from scratch? 3. What is the timeline to get this job done? 4. Are you open to use 3rd party APIS for it even if they are paid? Why Choose Me? 1. I have done more than 250 major projects only on freelancer.com. 2. I have not received a single bad feedback since last 5-6 years. 3. You will find 5 star feedback on last 100+ major projects which shows my clients are happy with my work. Portfolio: https://www.freelancer.com/u/AwaisChaudhry Timings: 9am - 9pm Eastern Time (I work as a full time freelancer) Please initiate the chat so we could discuss it in detail and we will continue from there. Thanks! Awais

Hello, Upon reading the job details I would say that all the required skills Arduino and C Programming fall under my skills. I work on freelancer full time and I believe I can do this job if I get all the detailed requirements. Please check my portfolio as well: https://www.freelancer.com/u/AITSoft Looking forward to your response. Shamshad

I am going to start work right now on creating Arduino code to connect an Arduino Uno or Nano to Arduino Cloud through a suitable Ethernet shield. My aim is to enable remote board control via the cloud. I'll also provide recommendations for the required ethernet shield.

Hello, my name is Muhammad Ali and I am an electrical engineer with 9 years of industrial experience. I specialize in IOT based projects (local server, web server, MQTT HTTP), circuit and PCB designing and microcontroller programming like Arduino PIC STM32 ESP8266. I understand you are looking for an Arduino code to connect an Arduino Uno or Nano to Arduino Cloud through an Ethernet shield. The primary purpose of this connection is to enable remote control of the board over the cloud. I believe my skillset is perfect for this project - specifically my expertise in IOT based projects (local server, web server, MQTT HTTP), circuit and PCB designing and microcontroller programming like Arduino PIC STM32 ESP8266. I would be delighted if you could please let me know if you would like me to discuss further how my services could be beneficial to you? Thank you for your consideration! Regards M Ali Abid

Hi, Greetings..! I am interested to work on your project. Please share what you have to control remotely and complete work flow details. Looking forward to working with you. Thank you shivkant

Hello, my name is Adnan Gohar and I am a experienced and results-driven professional with a strong track record of success. I understand how important it is for you to be able to connect an Arduino Uno or Nano to Arduino Cloud through an Ethernet shield so that you can enable remote control of the board over the cloud. I have the skills necessary to write an Arduino code that will enable this connection: My expertise in project management allows me to successfully lead teams across multiple projects, ensuring successful outcomes while navigating complex projects on time and within budget. My organizational skills and attention to detail ensure that all aspects of a project are addressed correctly from start to finish so that you get exactly what you expected when you hired me. Additionally, my strong communication skills enable me to effectively communicate with stakeholders about project progress so that everyone is aligned on goals and timeline. I would be honored if you would consider me for this job! Please feel free to contact me if you have any questions or would like further information about my skills or experiences.

A competent professional with 13 years of experience in Industrial Automation. Development of Engineering and implementation of PLC Control System, HMI and SCADA Development, testing & commissioning. ◾ PLC- Siemens- S7-1500F/H, S7-400, S7-400F/H/R, S7-300, S7-1200, S7-200, S5, TI PLC, LOGO!, Rockwell (Allen Bradley)- SLC500,MicroLogix,CompactLogix. Schneider- Zelio, M171/72 DirectLogic, Automation Direct Click PLC ◾HMI- Siemens-OP to Comfort Panels, Kinco,Deep-sea electronics,IFM ◾SCADA - WinCC, In-Touch Wonderware, Citect , Ignition ◾ Software- PCS7, STEP7, WinCC, WinCC-Flex, TIA portal,Protool Wonderware-Intouch, Comfort Soft, Microwin, S5-DOS,Pro-Tool, Prosave,project migration and upgrade,Codesys., RSLogix, Ecostruxure HVAC, SoMachine, Automation Direct ◾VFD- Siemens, Rockwell-AB, ABB, Telemechanique, SEW and Danfoss. ◾ Industrial Networks- PPI-MPI, Profibus, AS-i, Profinet, Ethernet, Modbus,Modbus TCP,GSD,GSDML, ◾ OPC - PC Access, OPC Scout, OPCUA,Metrikon, Kepware ◾ Project Documentation- ISA88/95, GAMP, 21CFR Part11, VP, URS, FRS, DS, IQ, OQ, PQ, SOP. ◾ Programming Languages - C#, VBA,VB.net, javascript ◾ Arduino Uno, RS485, Ethernet shield,Data Logging ◾ Raspberry pi,Webcam, Raspi Camera

Hello, and thank you for considering me for this job! I understand that you need an Arduino code written to use an Ethernet shield to connect an Uno or Nano to Arduino Cloud through an Ethernet shield. My expertise includes a wide range of technical areas, including Mechatronics, Robotics, Computer Science, Electrical Engineering, Control Systems, Signals and Systems, and Economy. I have extensive experience in the field of arduino development. With my skillset of fuzzy logic, neural networks and neuro-fuzzy systems, I am well-equipped to provide the required solution for this project. Additionally, I have experience in designing controllers for mobile robots as well as path planning algorithms for their navigation. My academic writing and research have been published in journals and conferences across the world. I would be delighted to discuss your project requirements further with you so that we can work together to achieve outstanding results! Please feel free to contact me if you have any additional questions or would like me to add anything else about me or my skillset into this application.

Dear Client.✋ I have just read your job description and your project is really interesting to me. The Items you raised are similar to what I have already done in practice and I think you can do it in a short time if you have a little explanation. I'm an expert having specialization in--- ✔️ Embedded system based on Microcontroller (ATMEGA, AVR, STM8, STM32, MSP430, TMS320, PIC ...) ✔️ Python with Deep Learning, Machine Learning ✔️ Python with Data Science ✔️ A system based on development boards(Arduino, Raspberry PI, Node MCU, Bluechip, Teensy,…) ✔️ Bluetooth, WIFI, zigbee, LoRA ✔️ Programming firmware of Microcontroller & C++ I think my many design and practical experiences can help you design your project and give you enough satisfaction. I look forward to your response. Best Regards.

Hi, You're looking to seamlessly integrate an Arduino Uno with Arduino Cloud using an Ethernet shield, which is a task I'm intimately familiar with. Having worked with similar configurations in the past, I understand the technical challenges and nuances involved. For the Ethernet shield, I'd recommend a specific model that best suits the Arduino Uno for robust connectivity. You'll benefit from a stable and secure connection to the Arduino Cloud, ensuring smooth remote control operations. Let's connect to discuss further details and ensure the best solution for your requirements. Best regards, Ioannis.

robsentrywv! Nice to meet you The project "I need arduino code written to use an ethernet shield to connect an uno or nano to arduino cloud" seems great and I want to work with you. I am an expert who has many years of experience on C Programming, Arduino so I am sure that I am a god fit for your project. And as an expert, I have enough energies and powers to do your projects. Please come over chat and discuss your requirement in a detailed way. Thank You

Hello robsentrywv, We went through your project description and it seems like our team is a great fit for this job. We are an expert team which have many years of experience on C Programming, Arduino Please come over chat and discuss your requirement in a detailed way. Regards

Hello, My name is James and I am a self-driven skilled freelancer who meets stated timelines and offers desired quality. I specialize in writing code for Arduino, specifically for connecting an Ethernet shield to an Uno or Nano through the cloud. I understand from your description that you are looking for an Arduino code to connect an Arduino Uno or Nano to Arduino Cloud through an Ethernet shield. The primary purpose of this connection is to enable remote control of the board over the cloud. I have extensive experience in the field of electronics, specifically with Arduino boards. This makes me the perfect person to write the code necessary to make your project happen. Not only do I guarantee professional results but I also provide them - gradeA results always. If you hire me for this job then you can rest assured that you will not be disappointed with the end product.

Dear robsentrywv. My name is Richard and I am a Senior Full Stack Developer with 7+ years of expertise in numerous technologies. I understand that you are looking for an Arduino code to connect an Arduino Uno or Nano to Arduino Cloud through an Ethernet shield. The primary purpose of this connection is to enable remote control of the board over the cloud. I believe that I am the perfect person for this job because of my extensive knowledge in computer science, specifically in arduino. With this knowledge, I can guarantee that any issues that may arise while developing your project will be taken care of quickly and efficiently. Additionally, I strive to provide top quality services while keeping customer satisfaction at the forefront of my mind at all times. If you choose me for this job, you can rest assured that you will not be disappointed with the end result. Please feel free to reach out if you have any questions or would like to discuss further how I can help you achieve your goals for this project!

Greetings! I'm a professional in providing high quality arduino code writing service. I am a top-rated freelancer with about 15 years of experience, having served about 700 satisfied clients. I provide 100% original work and unlimited revisions. Please message me to see my previous work. Thanks, Revival

Dear robsentrywv, I hope this message finds you well. My name is Christopher, and I have over 4 years of experience in C programming, specifically with Arduino boards. I wanted to reach out to you regarding your project titled "I need Arduino code written to use an Ethernet shield to connect an Uno or Nano to Arduino Cloud." I have carefully read through your project requirements and believe that I possess the necessary skills and expertise to complete this project with perfection. I have extensive experience working with Arduino boards and have successfully implemented similar projects in the past. If you have any questions or would like to discuss the project further, please feel free to connect with me in the chat. I am more than happy to clarify any doubts or provide additional information as needed. Thank you for considering my proposal, and I look forward to the opportunity to work with you on this project. Kind regards, Christopher

I worked with Arduino Uno during my uni days so I'm pretty sure I can figure out a solution and write a code for it. It also happens so that I made couple of projects with Arduino Uno during my uni days as well.

Dear robsentrywv,   We carefully studied the description of your project and we can confirm that we understand your needs and are also interested in your project. Our team has the necessary resources to start your project as soon as possible and complete it in a very short time.   We are 25 years in this business and our technical specialists have strong experience in C Programming, Arduino and other technologies relevant to your project.   Please, review our profile https://www.freelancer.com/u/tangramua where you can find detailed information about our company, our portfolio, and the client's recent reviews.   Please contact us via Freelancer Chat to discuss your project in details or let's appoint time for Zoom meeting to meet and discuss your project in details.    Best regards, Sales department Tangram Canada Inc.   

I once designed an ethernet circuit for esp32 using LAN8720A and currently it is still working fine. I think I can solve the problem for you, connect with me for more information.