Find Jobs
Hire Freelancers

Microcontroller for smart charger - preferable PIC16

€250-750 EUR

进行中
已发布大约 5 年前

€250-750 EUR

货到付款
The smart charger allows a user to switch the charge process of e-bike lithium batteries off earlier: at 40% (winter storage - degradation is minimal), 60% - 70% - 80% (save lifetime and decrease driving range) and 100%. Switching off takes place based on the voltages that correspond with the 4 "save" positions. As this is not 100% accurate, the switching points are recalculated by measuring the charge energy. I have done hundreds of projects in the cross-fields of power electronics (charging - DC/DC conversion), embedded software and data communication. My long term partner retired so I am looking for a new free-lancer to take over. Proven experience will be a condition. The attached documentation explains the details. The preference for PIC is because the hardware prototype is available, but when there is a good reason to change this is acceptable.
项目 ID: 18733466

关于此项目

16提案
远程项目
活跃5 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
16威客以平均价€654 EUR来参与此工作竞价
用户头像
Hello, I would like to work on your project and I have a couple of questions to ask as well, please contact me. Regards.
€750 EUR 在14天之内
5.0 (13条评论)
5.9
5.9
用户头像
Hi, I have good experience with power electronics and firmware development, I'm an user of microchip MPLABX and XC compiler, but I can work with other microcontrollers if needed, for schematic and PCB I use altium designer. It would be a pleasure to work in this project, I have hands on experience, I can design and assembly the prototypes and perform the circuit test and validation. if you have any question please feel free to contact me. Best regards, Adriano
€750 EUR 在60天之内
5.0 (7条评论)
6.0
6.0
用户头像
hi there we are a team of electrical engineers. we have worked of man Li-ion battery monitor and charge controller designs. we have reviewed the document. we require you to share with us the hardware schematics of your current hardware design. we can do the coding on pic16 as we have 8+ years of experience with pic16 controllers.
€750 EUR 在20天之内
4.8 (31条评论)
6.4
6.4
用户头像
Hello sir, how are you? I am an Electrical Engineer with the areas of expertise in Microcontroller, Embedded System, Zigbee, BLE, and firmware development for systems. I believe that my experience and skill in this background will prove to be of great help to you. I am ready to start working on your job today. I have proficiency in following software tools: 1. Altium Designer 2. Quartus 3. Mikro C (for all controllers) 4. MPLAB IDE 5. Proteus 6. Arduino IDE 7. Raspberry Pi 8. Eagle CAD 9. KICAD
€500 EUR 在10天之内
5.0 (4条评论)
4.7
4.7
用户头像
Hi there. I offer you the services for PIC designs. I just completed one job in PCB/ PIC. I am new on freelancer site, but I am designer expert with 10+ years of experience in Circuit designs, PCB designs, PIC software development. You can check our designs in our portfolio. If you want, I will share more designs I completed so far through interview. So I like to discuss the job with you. Lets talk about your project through interview. Thank you.
€700 EUR 在10天之内
5.0 (7条评论)
4.6
4.6
用户头像
Your project description is clear and the charging method you describe is reasonable. I have experience in building my own e-bike battery packs, and understand how the charging and balancing works. I have experience in developing for PIC16 family with C and ASM languages. To develop the software, I will need the prototype charger you have. I have my own PIC programmer and also some battery packs and electronic load device that I can use for testing. For the future extension (charged separately), I have experience also in developing Bluetooth low energy communications using BGM113 module.
€750 EUR 在30天之内
5.0 (3条评论)
4.5
4.5
用户头像
Hello, I study electronics at politecnico di torino, I would like to help you with your project. I have experience for the topics as follows, C/C++ programming. RF/MMW Antenna, coupler, power divider, phase shifter attenuator and amplifier designs. LED lighting Implementations with VHDL to fpga's Analog filter designs Matlab/Simulink implementations Pic/arm/arduino implementations Please let me know.
€777 EUR 在10天之内
4.9 (8条评论)
3.5
3.5
用户头像
I am an Electronics Engineer. I graduated from one of the tops the universities in Turkey. Middle East Technical University. I am working 10 years in the PCB design Industry in one of the biggest defense companies in Turkey. I recommend myself as I am highly experienced in this field because I have created projects more than 100 pieces of high tech PCB projects, firmware, and prototype for data acquisition. I can design your project in Altium Designer. Also, I am using Altium Designer for 10 years. I have my own libraries. If you want I can send a picture of my work. I can be your partner, you can trust me. Just send a message, you can learn my knowledge on the chat.
€300 EUR 在7天之内
5.0 (1条评论)
1.6
1.6
用户头像
Dear i have experienced to developed different type of electronics, embedded and software project. I have started to worked on freelancer before one month. I have also developed two axis controlled card using pic16f690 (MPLAB IDE) I must be complete your project within time.
€555 EUR 在10天之内
5.0 (1条评论)
1.0
1.0
用户头像
P-CAD 2006, AVR Studio, MPLab-IDE. Can do this with PIC or Atmel AVR 8-bit uC as main controller and something like HM-10 for BLE (v4.0). Stage 1 and 3 in 3-5 days, 2 and 4 in 5-7 days, depending on the scheme of charger. Stage 5 - approx 5 days (without phone software). Ready to discuss
€777 EUR 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi, I have 14 years of experience in Automotive embedded system and i would make your work more comfortable and maintainable. If you are interested, I can share my detailed profile and will have a discussion Regards SaaSAuto
€722 EUR 在22天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi There Thank you for the attached document. It is very thorough. Do you need the PIC to control the charger unit, or do you want the charger unit to be designed with the PIC? I can help you with this project. I did similar work before on LiFePO4 batteries which is very similar to LiPo. I prefer using the 16Pic series. If you use them already, keep on using them. They are very stable, low energy consuming and easy to program. I done a lot of PIC programming yearly, it is my favorite processor. All my programs is written in C or assembly (I prefer C). It is written modular and I use descriptions in my programs. You can easily do all 4 stages at the same time also. To create the last two stages wouldn't take much time. Do you need the program only? Do you also need a PCB layout? Do you want a complete product? Hope to hear from you soon. Regards, Floris van der Merwe.
€750 EUR 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have experience on a similar device. I would also like to understand what type of work you expect for the specified amount? Development of the scheme, the selection of electronic components, the trace of the printed circuit board, writing a program, debugging. What of it?
€777 EUR 在20天之内
0.0 (0条评论)
0.0
0.0

关于客户

THAILAND的国旗
Mae Ai, Thailand
5.0
1
付款方式已验证
会员自6月 2, 2018起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。