Assist in setting up and programming Velocio PLCs and Command HMI

$15-25 USD / hour

已完成

已发布

将近 5 年前

$15-25 USD / hour

I require a Velocio programmer/developer to assist me in setting up the HMI (HM-070BE) and Velocio Ace A7076. vBuilder with flow diagrams seems quite simple but I have no clue on: 1. How to communicate from HMITool to the HMI device 2. How to integrate between the PLC and the HMI Ideally also assist me on how to: 1. Read and display Hardware inputs: 1.1 couple and read a K-type thermocouple 1.2. couple and read an on/off switch (with software debouncing) 2. Setup software switches (on HMI to be used in PLC calculations) 3. Setup software timers (on HMI screen to be used in PLC calculations) 4. Setup a software lookup table (on PLC) to lookup certain values based on calculated temperatures readings and switch settings 5. Switch relays based on calculated, looked up values and switch settings 6. Advice on hardware to adjust a Variable Solid State Relay (to control power to a heating element) 7. Display on HMI: 7.1. Temperature readings (current and time based graphs) 7.2. Display relay settings (on/off) 7.3. Display variable SSR output 7.4. Display process status (from lookup table results). 7.5. Display process progress (simple bar graph) 7.6. Display estimated process completion time I have available: 1. A hardware setup - as shown in the attachment 2. Teamviewer to allow you to access my PC 3. Skype My time zone is GMT+2

PLC & SCADA

项目 ID: 19745220

关于此项目

10提案

远程项目

活跃5 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

颁发给：

@naveediiee

Thanks for reading my response to your project. I am working in a company as design engineer (electrical/electronics) with more than 6 year of experience in PLC programming. I worked on Velocio PLCs and Command HMI including multiple brand for including Siemens , Allen Bradly, Wago, Proface, GE and Schneider. Please review my linked in profile [login to view URL] I will do PLC and HMI programming work best for you for integration of thermocouple, digital and analog interlocks . This is best for me to work over the teamviewer for HMI and PLC programming Please open message board (PMB) so we can discuss further. looking forward for your positive response. Thanks, Muhammad Naveed

$19 USD 在40天之内

5.0

(1条评论)

3.7

10威客以平均价$20 USD/小时来参与此工作竞价

@mesutgode

Professional Eplan electric p8 user. Electrical engineering. Project management. PLC programmer. Scada designer.

$15 USD 在40天之内

5.0

(11条评论)

5.7

@cesur135

hello, i m automation engineer and i have finished many projects and i know siemens plc,wincc scada,HMI,allen bradley plc,factory talk and also i did many projects others on plc ,scada program i can do it your project

$15 USD 在40天之内

4.1

(21条评论)

4.6

@clim6100

I am control system engineer with various experience on PLC and HMI softwares. It seems like communication issue at first. I can help you using teamviewer or any remote access program. talk to me if u are interested.

$22 USD 在20天之内

5.0

(3条评论)

3.2

@Hazim91

Hello.. I am a Mechatronics Engineer who is skilled in automation field. i have a great knowledge in plc programming and design an interfaces. i achieved several projects in industrial sector including programming a silo system for biscuit production line. I'm familiar with different plc types including Delta, Mitsubishi and Allen Bradley. i am interested to work with you in this project..

$20 USD 在35天之内

5.0

(2条评论)

2.6

@Orbittas

Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with PLC & SCADA, I have made many PLC & SCADA projects, so I am sure I can do a good work for you. Good communication with my clients it is a top priority for me. If you have any doubt or want to see more of my work I’ll be here. Contact me for more info.

$22 USD 在40天之内

0.0

(0条评论)

0.0

@Ivan927

Hello! I am very interested in your post project. i have rich experience on it. I think this project is very suitable for me and i am sure i can give you good result . I can help you if you'd like looking forward to work with you. thanks regards

$22 USD 在40天之内

0.0

(0条评论)

0.0

@karanrkotian

Hi I am working in automation field since past 6 years as project engineer you can contact me on Whatsapp at +919096759235

$22 USD 在10天之内

0.0

(0条评论)

0.0

@Anakie

I have 30 years of Automation Experience Velocio are new but I have had to do many small projects over the years with odd or new PLCs. Go to YouTube and put in Living Sky Water and look for a video on Kerrobert (in Canada) that is about 2:36 long. The line of 6 identical modules processing dirty water was my work. HMI & PLC on each one. Sounds like you are doing some kind of temperature control. Usually best done by a dedicated temp controller and monitored by a PLC. Its better because most temp controller have loop tuner functions, which help make it work. Also sounds like you don;t know what an SSR is or how they are used, but that is easy. What can you tell me about the process? What experience do you have with PLCs and automated control? I am in Melbourne Australia so time isn't too bad for skyping.

$25 USD 在40天之内

0.0

(0条评论)

0.0

@pujacontrols

We are one of the best solution provider in the field of Automation. Not only programming of PLC or NI based machine we are also known for product development based upon micro-controllers. We also deal with the Products Panels, Drives and Sensors etc Our team has wide experience of LabVIEW the maximum experience is our team is of 16 Years on LabVIEW based Automation, who have started working of LabVIEW 6i. Velocio is a new to us but based upon our technology experience we assure you that we will be able to server you with best solution. As the details of the project is unknown we cannot quote the exact amount for the project, instead we can propose you the per man hour cost of the project. If you feel to discuss more please reply back we will be happy to discuss more. Regards Elldee

$22 USD 在40天之内