推广品牌：LuguLake 推广产品： 新闻稿主题：亚马逊出智能手机了，有无线QI功能吗？ 相关思路： 1. 市面上大品牌智能机型，支持QI无线功能的有哪些? 2.亚马逊智能机功能方面的几点猜想（将QI无线充充电功能加进去，再结合我们的产品）。
...and selection of components for a project. The project involves the creation of a power supply, an analog digital converter, and a relay. Key Responsibilities: - Circuit design: I need help with creating the circuit for the mentioned components. This includes ensuring the circuit is efficient and functions as intended. - Component selection: I'll require assistance in selecting the right components for the circuit. It's crucial to choose components that are of high quality and fit the project's requirements. The ideal candidate for this job should have a solid background in electronic engineering, particularly in circuit design and component selection. Experience with power supplies, analog digital converters, and relays will be highly preferred. This i...
I am seeking an experienced LT Spice expert to assist with the design and simulation of a half-bridge circuit to drive an ultrasonic cleaner load, 60W, 39kHz, and 10R impedance. I have an LT spice model that needs to be updated to meet the requirement. The floating side needs to show a square wave and the output to the load needs to be a sinewave. The main requirement is to update the values of the discrete component and use a much better MOSFET to meet the required output of 600V AC, 0.5A, 39kHz Responsibilities: - Improve the LT Spice model for the half-bridge circuit (no rectifier needed), Output is AC and not DC - Conduct detailed simulations to analyze performance - Optimize circuit design based on simulation results The MOSFET part number is SIHP24N80AE-GE3, The PWM controller...
We have diagrams for the cars. We want someone who can create a database of where we can find the analog fuel sensor wire under the dashboard. Project is for 1000 cars and can be long term.
I'm in need of a skilled circuit board designer that can create the and design the Greber file for me, I need to send the files to the manufacturing compony. My project contains few components only. SAM D11C 14-pin chip, 3 LEDS, Battery holder, and a reset switch. The "j2" pads are for programming the chip, Gnd, power, and clock. The 2 antennas traces are connected to analog pins A2 and A4. LEDs are connected to digital pins 24,25,31. the reset button to RST pin of course. For the 4 programming pads. Gnd and Power goes to Gnd and VDD pins in the chip, For the clock, I'm not shire which pins. layout size : 10 cm by 5.398 cm
I'm launching a new brand called GFE Trailers. GFE stands for Good Fortune Endeavors. We offer trailer leasing services for wholesales, retailers, and manufacturers. We are looking for a logo that reflects our brand. We want our primary color to be green with our secondary colors as white, gold, and /or black. We want to create a brand that communicates the following: Hardworking...communication that connects with your target audience Who are our target customers? Manufacturing, Retail, Shippers, Receivers. Logistic companies ( Owner Operators) What size company are your target customers Small to medium sized companies Who is typically the decision maker when it comes to making purchases with businesses like yours? Logistic and Warehouse managers either shipper or ...
...seeking an experienced PCB designer to create a functional prototype design of a multilayer PCB primarily composed of analog components. The main aim is to validate the functionality of the design. Key Tasks and Responsibilities: - PCB Design and testing: The prototype's design should allow for rigorous testing of its functionality. - Component selection: Predominantly analog components will be used in the design. - Creating documentation: Comprehensive documentation must be provided detailing the logic behind the selection and arrangement of components. Ideal Experience and Skills: - Previous experience in multilayer PCB projects - Confident and competent working with analog components - Proficiency in PCB design and prototyping software - Strong know...
I need a skilled professional to add (2) Adjustable analog input noise filters to an existing ( Kinco builder) program. The filter intensity needs to be adjustable In the settings screen on the HMI.(Kinco D tools)
...microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs: 6 Analog outputs: 2 Key deliverable: A fully programmed NUCLEO-G491RE STM32 and ESP32-DEVKITC-32UE microcontroller that controls a sli...
...function: A shipping calculator. Custom built, no API. Primary objective: 1) Customer chooses from country and to country (Very similar to this website's interface: ). 2) After the customer gets a rate from two couriers only (UPS and FedEx) and multiple shipping services, the customer provides more information about three things: A) The sender. B) The receiver. C) The package. Then a customer checks out using Paypal. Secondary objective but not as important or could done possibly at a later phase: 1) Package tracking which possibly needs an API. 2) Basic signup and sign-in menu similar to this of ( - Check it). Which the customer can see his order number, download a shipping label, and track a package). At least the primary objective
I am on the lookout for an experienced C/C++ programmer who can help wi...C/C++ programmer who can help with code adaptation on my current LoRa WAN Helium Network. Based on this project code to send sensor data to Helium (1 for EU868, 1 for US915) but use with esp32 d1 mini and LoRa board connected to lmic_pins: .nss = 4, .rxtx = LMIC_UNUSED_PIN, .rst = 16, .dio = {5, 26, }, ONLY reading 6 ds18b20 temperature sensors and 1 flow sensor, 1 analog In (built in esp32 module) - NO other sensors, NO display - 1 board hast to work in EU868 AND 1 board hast to work in US915 MHz Helium Network - Helium console account and device exists already (including Dev EUI, App EUI, App Key) - Cayenne and TagoIO support is very welcome looking forward to your proposals, regards
I'm in need of an electronics professional who can convert my detailed Arduino connections into a clean, organized schematic diagram. - You will work on the Digital input/output pins, Analog input pins, Power supply connections, literally all connections of my Arduino setup. Essential Skills and Experience: - Knowledge of Arduino - Proficiency in creating schematic diagrams - An eye for detail, and great organizational skills. A schematic will help us represent my setup visually. Our goal is to have a convenient direction for future referencing. In your bid, please include examples of similar work you've done in the past.
...experienced individual to help with an audio breadboard project focused on low frequency tone decoding. The main goal of this project is to trigger an external camera circuit via an analog signal. Key Project Requirements: - Low power stand alone circuit to trigger a camera - Build a mic from parts, i.e. electret, cap, and resistor, that can pick up in the 22Hz range - Amplify the signal with a common amp chip (i.e. LM 386) - Amp needs to work with existing tone decoder circuit that works. Ideal Skill Set: - Proficiency in Low Frequency Signal Processing - Experience in Audio Breadboard Projects - Understanding of Analog Signal Transmission - Comfortable walking me through this online, via video interaction after schematics draw uo This is an interesting and challenging...
I'm in need of a proficient and experienced electrical engineer to design an analog audio circuit for mixing multi-channel signals sourced from line level feeds. This will require expertise in designing robust and low-noise analog audio circuits capable of dealing effectively with multiple audio inputs. Ideal Skills and Experience: • Proficiency in electronic circuit design, specifically analog audio circuits. • Experience with handling multi-channel signals. • Familiarity with line level audio signal processing and mixing. We need an engineer with deep experience in high-end analog circuit design using low noise operational amplifiers. We will provide basic diagrams and objectives. The project involves high quality op amps and line driver...
...network architecture, signal distribution, and redundancy is required. - Establish a walled garden. Proficiency in network security and user segmentation is necessary. - Setup multiple access points. Experience in balancing network traffic and optimizing signal strength across numerous APs is anticipated. - Install dome cameras and PTZ functionality for security purposes. Knowledge in IP cameras, analog cameras, and video recording and storage solutions is essential. - Implement a billing system, enabling customers to pay for access. Prior experience in similar payment gateway or subscription systems will be ideal. - Lastly, include a feature to allow free access in emergency situations. Your ability to integrate multiple systems and maintain a user-friendly operation would be ...
...avatar frames. We are looking for a creative freelancer to design and describe a collection of virtual gift concepts. Project Requirements: Gift Sets: Develop 5 distinct gift sets, each containing 10 gifts. Each gift should have a unique theme and pricing based on perceived value. Description: A brief description of the gift. Psychological Meaning: What the gift symbolizes and conveys to the receiver. Animation Concept: Describe how the gift should appear in an animated form (brief storyline). 1-5 seconds Creativity and ability to develop unique and engaging virtual gifts. Understanding of human psychology to create gifts with emotional resonance. Experience with live streaming apps and virtual gifting is a plus. Submission Requirements: Provide samples of previous similar w...
I'm looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Qualifications: -must have Distortion Analyzer, frequency sweeps -be able to build a prototype board totally functional -Simulate Analog / Digital signals Regarding hardware Cflash Audio Player using AAC codec Full prototype hardware to be shipped to US Audio player will use CFast card via SATA (not USB) and play audio files using AAC codec DDDAC1794 circuit Dual Dedicated PCM clocks via TCXO 44.1 khz and 48 khz auto select MUSES IC attenuator Steel enclosure (pick something from China but big enough to support batteries) RCA output Remote
I need a backend api (or program) that running ...send messages via facebook messenger (do not use Facebook APIs) using Selenium or other automation frameworks you are familiar with (if you use other automation frameworks, you must notify me for confirmation). Key features: 1. Log in with the provided the user/password. 2. Send messages to specific Facebook users with provided information. 3. Send Messages from more than 2 senders to specified receiver in a short time. 4. Receive messages from Facebook users in real time (can get username information, message content). 5. Facebook will not block messages for spam reasons (the limitation is defined by you). Must-have skills: Java (familiar with Spring Boot) or C# programming skills (familiar with .Net core) Nice to have: Selenium, We...
...and data analysis. Key Features Required: - Real-time data monitoring capabilities for prompt and effective decision making. - Effective data visualization to understand the complex datasets that IoT devices generate. Devices & Sensors: - A wide range of devices like temperature sensors, motion sensors, and light sensors. - Capability to work with level, pressure, and any other device with an analog output. Data Storage & Retrieval: - System should support time-series data storage to enable historical data analysis. - Seamless database integration for efficient data management. - File storage capabilities to ensure a comprehensive dataset is maintained. Expertise in LoRaWAN based Gateway integration will be highly beneficial to this project, along with extensive kno...
...applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design files ready for manufacturing, including gerber files. Schematic capturing and PCB layout. BOM (Bill of Materials) with sourcing options. Documentation for assembly, testing, and troubleshooting. Qualifications: Proven track record with PCB d...
Hello, I'm in need of a professional to create an embedded data acquisition module. This module's primary purpose will be to monitor and collect data. The module will be primarily responsible for collecting analog and digital IO data, with a focus on 0-5V range signals. Ideal skills and experience for the job: - Embedded systems development - Proficiency in collecting and managing analog and digital IO data - Experience with 0-5V range signals - Ability to create a robust, reliable and efficient data acquisition module The successful candidate will be able to deliver a module that can effectively monitor and collect data, and ensure its seamless integration into the system.
I am looking for a skilled developer to port an existing monitoring p...remote control over the devices being monitored. The ideal developer for this project should have: - Strong experience in programming with C#. - Expertise in porting applications between different operating systems. - Prior experience with implementing real-time monitoring, data visualization, and control functionalities. - XEY ! The software is to monitored controllers with 3analog inputs, 2 analog outputs, 10 digital inputs, 10 digital outputs, over simple serial communication, software can link up to 128 controller. If you have the right skills and experience, please don't hesitate to request for the place your bid. Copy of the source code will be provided for potential successful bidders for furthe...
I'm looking for an ESP32 expert to help me with a project that involves utilizing both inputs/outputs and write a code in C language The project requires 7 inputs and 6 outputs. - Inputs : Time Temp sensor probe Soil moisture sensor VPD sensor ...will control the outputs. The successful freelancer will need to provide the following : Full electronic diagram. List of the parts needed other than the inputs sensors and the outputs. Programing code. Ideal skills for this project include, but are not limited to: - Proficiency in programming with the ESP32 platform - Experience in working with digital and analog inputs/outputs - strong understanding in Electric and elect...
...should be able to handle both analog and digital input/output signals. Key requirements include: - Developing a Mitsubishi PLC program for PID control - Integrating both analog and digital input/output signals into the PLC program - Ensuring the program is efficient and effective in controlling the equipment The ideal candidate should have: - Proven experience in developing Mitsubishi PLC programs - Expertise in PID control system - Previous work with both analog and digital signals - Ability to deliver efficient and effective control systems I have a small test job that needs completing The plc Mitsubishi FX3G 14M & HMI E615 Will be controlling the heating and cooling on a small mixer There is analog input (PT100 temp probe) and pressure sensor 4-...
...navigation device instead of the dedicated GPS and I’m now missing the notification / music information shared between my phone and the device in front of me while driving. I’m looking to recreate that behavior. With a dedicated android app About the app now: The app will have two side: - A receiver side (the tablet that I will use as a GPS) that will display music info and notifications information’s. - A sender side (my phone) that will be sending the information (notification and music) to the receiver. At launch, the user should be able to choose between the two sides and the choice should be remembered. Information that should be sent over for the notifications: Description Mandatory Priority Notification Title YES 1 Notification Text YES 1 Notificat...
I urgently require the services of a seasoned coder, specifically in macOS, to create a batch file that will successfully connect distinct MIDI channels in an efficient and reliable manner. There are 3 Channels that need to be connected with the bonjour name of: Logic Transmitter connected to Logic Receiver OBS2 Transmitter connected to OBS2 Receiver OBS3 Transmitter connected to OBS3 Receiver I also need for this to connect when the computer starts, and constantly check if it disconnects and reconnect it once it back online.
I am looking for a skilled Python developer who specializes in VoIP and PJSIP development. T...Key Features: - Set up SIP trunking for call recording and monitoring, IVR system, and SIP trunking. - Convert my analog phone system to a VoIP system. - Implement Direct Inward Dialing(DID) support for calls between multiple company sites. - Configure the Python bot to manage incoming and outgoing calls. Bot Functionality: - Answer and route incoming calls to appropriate destinations. - Initiate outgoing calls based on specific triggers or events. - Handle real-time call transfers and call forwarding. Skills Required: - Proficient in VoIP and PJSIP development using Asterisk. - Strong Python programming skills. - Experience with SIP trunking and DID. - Familiarity with analog to ...
I am looking for a skilled Python developer who specializes in VoIP and PJSIP development. T...Key Features: - Set up SIP trunking for call recording and monitoring, IVR system, and SIP trunking. - Convert my analog phone system to a VoIP system. - Implement Direct Inward Dialing(DID) support for calls between multiple company sites. - Configure the Python bot to manage incoming and outgoing calls. Bot Functionality: - Answer and route incoming calls to appropriate destinations. - Initiate outgoing calls based on specific triggers or events. - Handle real-time call transfers and call forwarding. Skills Required: - Proficient in VoIP and PJSIP development using Asterisk. - Strong Python programming skills. - Experience with SIP trunking and DID. - Familiarity with analog to ...
I need a profess...the TI LAUNCHXL-F280049C. 2. Programming: The program needs to be written in C. 3. Functionality: The program should be able to accept an integer input that represents a torque value. This input would then be used to adjust the speed of a small motor controlled by the DRV10970. 4. Signal Control: I'm unsure of the type of signal that should be used to control the motor speed(PWM, Digital, Analog). Therefore, I am open to suggestions on this aspect. It would be great if you can provide your expert advice here. 5. I would also appreciate help/schamtics on how to connect the two boards (DRV10970EVM and LAUNCHXL-F280049C) so that i can run the program Looking forward to work with an individual who is proficient in C and has strong knowledge in using mi...
I'm seeking a profe...Your responsibilities if you take on this project would include: - Developing and training a machine learning model on images of objects - Training and testing of new model based on ResNet-18 - Testing and optimizing the model for accuracy - Outputting metrics such as accuracy, F1 score, precision recall curves etc - Visualise model performance through relevant plots (e.g., confusion matrix, receiver operating characteristic curve, precision recall curves) - Evaluation of results particularly with respect to AUC and accuracy. - Provide technical details of the model with clear justification for all developments. Your experience in similar projects is necessary. If you do apply, please include work you have done in Machine Learning I am looking for a pri...
...for a skilled Arduino programmer who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a button), remote (via the Lora modu...
I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a specialized project, and a success...
I'm looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Specific features and requirements include: Qualifications: -must have Distortion Analyzer, frequency sweeps -be able to build a prototype board totally functional -Simulate Analog / Digital signals Regarding hardware Cflash Audio Player using AAC codec Full prototype hardware to be shipped to US Audio player will use CompactFlash and play audio files using AAC codec DAC is PCM1794 or WM8742 in non-upsampling mode Dual PCM clocks 44.1 khz and 48 khz auto select MUSES IC attenuator Steel enclosure (pick something from China but big enough to support batteries) RCA output Remote This project requires deep familiarity with audio technology, battery operations, and prototyping. I...
I need a Python program developed that can establish and manage a connection with a National Instruments (NI) DAQ USB-6008 for the following tasks: - Analog Input: I need to feed real-time analog data into the program. This part of the program will be responsible for reading the analog input from the DAQ. - Analog Output: The program should also have the capability to send analog signals to external devices. This will be used to control physical devices. - Digital Input/Output: I will also need the program to manage digital signals. This will include reading digital inputs and sending digital outputs. - Want to connect 8 piezoelectric sensors to the DAQ and monitor all the signals in real-time on a PC. The program will need to manage all these tasks i...
I am looking for a skilled developer to create a control app for a thermal camera. The app should be developed for the Windows platform based on supplied SDKs, but will need to communicate wirelessly via radio link, using Arduino. The premise...to communicate wirelessly via radio link, using Arduino. The premise is that we will be able to have camera control over a wireless link (end goal is to mount the camera on a drone). We need to control focus, image camera, video start/stop and some other functions. Hardware is based on Lattepanda Alpha (integrated Arduino processor). Windows 10 OS. Receiver is SBUS. More information on SDKs can be provided upon request. Due to the timeframe, we are looking for developers on same or similar timezone to UK.
I'm looking for a highly skilled software developer to create software that will enable multi-channel recording of broadcast signals via a Software Defined Radio (SDR) receiver. The software will specifically be used for live monitoring of these signals. Key features I prioritize include: - The ability to record broadcasts in WAV format. - Ensuring compatibility and smooth execution with specified SDR receiver models, which are RTL SDR and HackRF One. The ideal freelancer for this project should have: - Proficiency in software development with relevant experience, particularly in broadcasting and communication technology. - In-depth understanding and experience working with SDR receivers, specifically RTL SDR and HackRF One models. - Familiarity with broadcast signal ...
...control 2 stepper motors and two DRV8833 modules to control 4 DC motors, there is also a 1W LED controlled by one of mosfets. The motor modules and mosfets must be equipped with jumpers to select the 5 or 12 volt power supply. Not all mosfets need to be controlled by pwm pins. All digital inputs must include a 10k ohm resistor, but with the possibility of excluding it. There are also digital and analog inputs, some modules and pins for I2C. I attach some images, they are only indicative of the position of the various connectors. In the first image, the Arduino board connects over to PCB A and it is upside down. In the second image, PCB A is inserted into the Arduino, it remains behind the PCB and perhaps manages to use a little more space. The third image is the legend of the var...
...Responsibilities: - It's critical to successfully connect and properly configure the Zapier webhook service. - Once the webhook has been activated, the task would be to automate dropping a voicemail. Specific Requirements: - There should be two phone calls triggered from the webhook at the same time. One is a call from my personal phone number, the other is a call from a private number. This is so the receiver cannot answer the call and instead receives the voicemail drop and a missed call from my phone number. - The voicemail content should be a pre-recorded message, skill and knowledge in audio file setup for voicemails is helpful. Preferred Qualifications: - Prior experience with Zapier's webhook capabilities. - Clear understanding of voicemail systems. - Familiar...
I'm in need of a tech-savvy individual who is skilled in setting up home sound systems. I currently own a Denon receiver and am looking to connect it to a few different devices. Ideal Skills and Experience: - Proficient in setting up home sound systems - Experience with connecting audio devices to receivers - Excellent knowledge of adapting technology - Knowledgeable about iOS devices, Roku, and iPods The job should not take more than an hour and a half. I am located in the Kendall area, so someone in this vicinity would be highly preferred. Please note that I have the necessary cables for the connections, and I'm not looking to purchase any additional equipment. Let me know if you have any questions.
...a specialized microcontroller for an HVAC application. The microcontroller requires specific features and functionalities. Key Requirements: - Temperature Control: The microcontroller should be able to regulate temperature within a range of -50 to 100 degrees Celsius. - Timer Function: An essential feature, the microcontroller needs to support timer functions. - Inputs and Outputs: Integrate 3 Analog, 5 Digital inputs, and 8 digital outputs for a comprehensive system. - Should have integrated IoT for viewing data online. Ideal candidates should have: - Previous experience in designing microcontrollers. - Proficiency in programming and testing microcontrollers. - Knowledge of sensor integration and communication protocols. While the project demands expertise in microcontroller ...
I am seeking a skilled prog...The core tasks involved are: -Sensor Data Reading: You will develop the functionality to read the altitude sensor data with the frequency of every second. -Data Transfer: The altitude sensor data must be sent as frames of data in real-time over the Internet. -Data Reception: The designated standalone software should seamlessly receive and interpret the data received over the Internet . The receiver device is raspberry pi 3 . Ideal expertise for this project include proficiency in sensor data reading, real-time data broadcasting, and proficiency with standalone software applications. Having previous experience in sensor or Internet data transmission will be considered highly. Please, place your informed bid if your skills align with the project'...
I'm in need of a comprehensive warehouse inventory replenishment tracking system for our Fastener drawer at Home Depot. The system should have a focus on reporting and analytics, real-time bin shrink, and work with an electronic keypad and analog/digital interface. Key Features: - **Reporting and Analytics:** The system should provide insightful reports on inventory levels and trends. This will help us make data-driven decisions. - **Real-Time Bin Shrink:** I need to know if the quantity of items in the bin matches the recorded amount. - **Interface:** A mobile app interface will be ideal, making it easy for staff to work on the go. Inventory Tracking: - The system should involve manual entry for inventory tracking. The system should be user-friendly and easy to use ...
...friends and family, so I'm aiming for a design that is simple and elegant. Key Requirements: - Modern and minimalistic design: The style of the cards should be clean, contemporary, and uncluttered. - Experience with typography: Prior experience with text design would be highly advantageous. - Understanding of gifting culture: A keen understanding of what makes a gift special in the eyes of the receiver, and how design can contribute to that, will be a big plus. Deliverables: I'm open to suggestions on the format for the scripture cards. I'm looking for your expertise on the most suitable format for these kinds of cards, be it printable PDF, digital images (JPEG, PNG), or editable source files (AI, PSD). This is a relatively straightforward project, and the right...
I am seeking an entity with expertise in ESP32 programming, specifically having an in-depth understanding of RTKLIB's implementation and RTCM conversion. The task includes: - Coding, making the ESP32 project work in coordination with the RTKLIB to function optimally - RTCM (Radio Techni...is needed. Particularly converting RTCM messages 1005, 1077, 1087 to 1006, 1004, 1012 and adding 1033 - The ideal candidate for this project needs to be familiar with the RTK rtcm and how to utilize the 'TADJ = 1' variable in the RTKLIB to enhance positioning accuracy and aid in correcting transmission errors. If you have the skillset, including an understanding of sensor data processing and receiver clock adjustments, please apply. Prior experience with positioning system deve...
I'm in need of an expert to design and develop firmware for real-time tracking in an indoor positioning system using UWB modules. Your expertise should include: - Firmware development for Qorvo Decawave UWB modules (DWM1001C) - Firmware development for nRF52832 - Understanding and implementation of Real-time tracking with multiple tags and...indoor tracking systems I expect the resultant firmware to offer efficient and accurate real-time tracking. Please only put a bid if you have relevant experience and are confident in this area. Your portfolio of similar projects will be asked for review. As a reference; firmware needs to be designed to work with 20 tags and 20 anchors in the same zone. Tags will be communicating over BLE with receiver after determining the distan...
I need a Flutter developer for a website, I want you to create an automation website that generates ( SMS iPhone videos ) the website is gonna be like this 1- there is an empty SMS template 2- the user adds the text in every part ( sender - receiver ) 3- click okay and the website generates the video 4- the video has to be like that ( one message at a time, voice over for every message, background video game ) here is an example of what I want exactly: @
I'm in need of an expert who can carry out a task that involves eavesdropping on Thuraya satellite communications using a Hack RF receiver. This task is for research and analysis purposes. Your main responsibilities will include: - Real-time eavesdropping on Thuraya satellite communications. - Extracting specific information including location data, voice communication, and details of data transfers. The ideal freelancer for this project should have: - Proficiency in working with satellite communication systems. - A strong understanding of Hack RF receivers. - Experience in data extraction and analysis. Please be sure to include any relevant experience in your proposal. This is a complex task that requires specialized skills, so relevant experience will be highly valued.
...to be capable of supporting PDF files, though text files or images are acceptable alternatives. - The projector should be able to display content like a standard projector, including the ability to project onto walls. The projected image can be smaller than typical; alternatively, a design similar to children's toys that use a magnifier for viewing could also work. - I would prefer an entirely analog design for the mini projector, eliminating the need for a battery. However, if a battery is necessary, it should have a long lifespan, similar to that of older Nokia phones, lasting 3-4 weeks. - All components must be of high quality and the entire device should be waterproof. - Optionally, a touchscreen might be integrated on the spherical silicone casing to allow document navi...
