I am looking for a freelancer who is experienced in embedded code, specifically Arduino. I have a specific project in mind that requires the use of embedded code. Skills and Experience Required: - Proficiency in Arduino programming - Strong knowledge of embedded code development - Experience in working on projects involving Arduino and RS485 Modbus protocol Refer the datasheet attached if needed The purpose of the project is not specified.
I'm in need of an Arduino-based relay switch that can operate multiple circuits serially. The purpose of this project is to start lights in a serial fashion, using physical buttons. Key Requirements: - Build a reliable relay switch: The switch should be able to handle automation for up to 15 relays. - Physical Button Interface: The relay switch must be operable via physical buttons for a user-friendly experience - specially to set adjust time delay between the serial switching Ideal Skills: - Arduino Programming: Experience in programming Arduino to build relay switches. - Circuit Design: Proficiency in designing circuits for handling multiple appliances. - Remote Control Systems: Knowledge in implementing remote control systems for automated appliances. - User ...
I'm looking for a freelancer who is proficient in using the Proteus Design Suite for an intermediate-level simulation project involving an Arduino microcontroller. Key Requirements: - Proficiency with Proteus Design Suite: The ideal candidate should have prior experience in creating and executing simulations using this platform. - Intermediate-Level Microcontroller Simulation: The project involves simulating an Arduino microcontroller which requires a good grasp of microcontroller programming and circuits. - Attention to Detail: The successful freelancer will need to ensure high accuracy in the simulation results. - Timely Delivery: The project has a set timeline, which the freelancer should adhere to strictly.
For my recent short book about utilizing Arduino, I need proficient help with enhancing the aesthetics and formatting of the text. The ultimate goal is to turn my raw material into a print-ready layout while ensuring it matches my preference for a modern and clean style. Final format needs to be one that I can easily edit. Style reference: Makezine (make magazine) books or Hackspace magazine. Key tasks for this project: • Develop diverse page layouts to maintain reader engagement. • Incorporate placeholders for pictures to enrich the content visually. • Include placeholders for elements like flow diagrams and illustrations to support the text. Ideal candidate: An ideal candidate for this position will have considerable experience in book layout design, especi...
Currently working on a project where I need ABMP file Printed using a raspberry pie PicoW and a thermal printer HS-K33 using the UART on thr pico. I have attached the bmp file.
I'm currently facing an issue with my Raspberry Pi, as it is no longer able to connect to Wi-Fi, despite having done so without problems previously. Key Points: - The core problem is the inability to connect to Wi-Fi, which was previously working fine. - I have already attempted standard troubleshooting steps such as restarting the Raspberry Pi, checking Wi-Fi settings, and updating the software. - The problem persists despite these efforts. Given my situation, I'm looking for a professional who can help me in diagnosing and resolving this issue. This requires a deep understanding of Raspberry Pi systems, networking, and Wi-Fi troubleshooting. Your ability to efficiently diagnose the problem and offer a reliable solution will be highly valued.
Description: I am seeking a skilled freelancer with experience in electronics, Motor Control through Pulse/Step & Direction, Arduino, and servomotors and their drivers to assist me in implementing the basic control for reliable operation. The primary focus will be on the electronics aspect of the project. The motor in question is a "T6 Series 750W AC Servo Motor" (see link: ) which is intended to be controlled using an Arduino Portenta H7. What I Require: - Development of an appropriate circuit diagram compatible with the motor driver and Arduino. - Selection of the required components. - Configuration settings including pulse widths, pulse formats, etc.
I am looking for a skilled developer to create a control app for a thermal camera. The app should be developed for the Windows platform based on supplied SDKs, but will need to communicate wirelessly via radio link, using Arduino. The premise is that we will be able to have camera control over a wireless link (end goal is to mount the camera on a drone). We need to control focus, image camera, video start/stop and some other functions. Hardware is based on Lattepanda Alpha (integrated Arduino processor). Windows 10 OS. Receiver is SBUS. More information on SDKs can be provided upon request. Due to the timeframe, we are looking for developers on same or similar timezone to UK.
I have a requirement for programming a Raspberry Pi Pico microcontroller to interact with multiple sensors in an escape room. The project responsibilities include: - Sensing and gathering data from temperature, pressure, and motion sensors in the escape room. - Control and actuation tasks for unlocking doors, manipulating lights, and triggering audio cues. - Provide feedback to players in the escape room. - Ensuring smooth communication and networking capabilities. Ideal candidates for the job should have experience in microcontroller programming, specifically the Raspberry Pi Pico, understanding of various sensor inputs, and experience with escape room devices would be an added advantage. It is required to have knowledge in coordinating sensed information to act upon vari...
I'm in need of an experienced Arduino developer to create a custom software for my industrial machine. The software should mainly focus on data logging and controlling the machine's sequences. Key Requirements: - The software must log the machine's operation data onto an SD card. This data should be easily accessible and able to be downloaded for further analysis. - The Arduino software needs to control the sequential operations of this industrial machine. This involves managing the input and output signals, and ensuring a timely and accurate execution of the machine's functions. Ideal Skills and Experience: - Proficient in developing Arduino software. Knowledge of both sensor data collection and actuator control is a plus. - Prior experience in p...
I am seeking a proficient tech freelancer with skills and experience in working with Nextion Intelligent series HMI and Arduino Nano in combination. The aim of this project is to create a calculation and display system, primarily based on timer measurements and pre-stored factors. Skills and Experience: - Strong understanding of Nextion HMI and Arduino Nano - Experience handling calculations and display systems Project Tasks: - Develop a system using Arduino Nano for accurate timing - Implement calculations based on timer measurements and stored factors - Display results on Nextion Intelligent series HMI This project does not involve processing of sensor data, business metrics. The focus is on timer measurements and stored factors to calculate, display and stor...
The project consists of the design of number 2 PCBs. The first PCB named A is a breakout board for Arduino Mega and Giga, with a maximum size of 140x120 mm. The second PCB named B is a small board and it connects to PCB A with a flat cable, the size is not defined. In the PCBs there are JST HX - 2.54 or standard pin connectors, mosfets for power outputs, two A4988 modules to control 2 stepper motors and two DRV8833 modules to control 4 DC motors, there is also a 1W LED controlled by one of mosfets. The motor modules and mosfets must be equipped with jumpers to select the 5 or 12 volt power supply. Not all mosfets need to be controlled by pwm pins. All digital inputs must include a 10k ohm resistor, but with the possibility of excluding it. There are also digital and analog inputs, ...
I'm in need of a professional to help me design and write firmware for a hoverboard. I want to write hack frimware and allow me to control from arduino or controler i need help using team view / remote control
...complete. • Q: Can you give me some good project ideas? A: Making a wrapper around our API for your favorite language is always a good idea, especially if your favorite language is not at the top of the mainstream language list. Mobile weather apps can be interesting, especially if you plan on continuing development beyond this project. Simple embedded projects on platforms such as Raspberry Pi or Arduino are also fun. Visualizations are nice either on a webpage or in a language such as R. Finally, any project with AI in the description is almost certain to be selected. • Q: How many projects will you accept in total? A: We plan to accept as many reasonable submissions as we receive up to 100 total. What else should I know? • Do not su...
Seeking a professional with extensive knowledge in Arduino programming for creating a firmware for STM chips in stm32duino or superior, optimized for ESP32, aimed at reading data from NFC tags. The perfect candidate should display: - Proficiency in Arduino - Familiarity with ST25R3911 NFC chipsets and NFC tag operations - Previous experience programming firmware for STM chips - Understanding of data reading process Your responsibility will be to design, develop and test the firmware ensuring the functionality of reading data from NFC tags is seamless and efficient.
I’m in the process of creating a robotic arm for plucking tomatoes using six servo motors. I need help in writing the arduino code. Your code will command the robot to perform the following actions: - Rotation of the waist - Shoulder movement - Elbow bending - Wrist rotation - Gripping objects - Detection of red color With the red color detection, the gripper should open up and proceed with the tomato plucking. The kinetic architecture of this robot should be inverse, and the links I'm using for shoulder, elbow, and wrist are 18cm, 12cm, and 8cm respectively. The color sensor model is tcs3200. Once the tomato is held by the gripper, a stroke should be initiated to pluck the tomato. Interested freelancers should share past work of similar projects. Knowledge of robus...
I'm looking for an expert in ISO file creation specifically for Raspberry Pi. The task involves creating an ISO file that I can burn onto a microSD card. You will just send me the completed iso file. You'll need to refer to instructions from the following link: The process should be followed meticulously to ensure the ISO will work perfectly with my Raspberry Pi. The ideal candidate should have: - Proficiency in ISO file creation - Experience with Raspberry Pi projects - Familiarity with Windows operating system Please note that I should be able to burn this iso to microsd card, pop it into my Raspberry Pi, and see it up and running. The login info for the accounts that need to be created will also be sent to me.
I'm on the lookout for a seasoned professional with profound knowledge and experience with Arduino and motor control. Ideally, you should have: - Extensive experience with Arduino programming. - Understand how to code for servo motor control. - Significant background with sensor data collection and device communication. Specifically, your task is to develop an Arduino code to control a single servo motor. Your main role will be programming the Arduino to control the actuator and to communicate appropriately with the device. Proven experience in similar projects will be highly appreciated but is not mandatory. Extra points for creative problem-solving and the ability to work independently.
I need a skilled programmer to write Arduino code that accomplishes the following tasks: - Ability to control LEDs. - Command a Servo Motor to make randomized movements. - The code should allow for control over motors and other actuators. Ideal experience for this project would include proficiency in Arduino coding and electronics, with a particular focus on controlling servo motors and LEDs. Understanding of random movement patterns is a bonus. I rely on your expertise for effective and efficient control of these components.
I have some controller project, working project with Teensy 4.0 and Arduino's program. Now I need update this project for additional canbus data (two IDs): reading actual shifter position (one ID) and send data to other units (another one ID).
I own a YOLOv8 model formatted in keras-cv and need a skilled professional to convert it into the latest version of TensorFlow Lite. The crucial function of my model is its real-time object detection capabilities. The objective is to utilize this model for object detection on a Raspberry Pi, and this functionality must be maintained post-conversion. Ideal Skills and Experience: - Proficiency in TensorFlow Lite - Experience in YOLOv8 model - Familiarity with keras-cv format - Experience working with Raspberry Pi - Proven track record in object detection models conversion.
...to rotate its jet part. - Speaking: While I didn't specify the exact method for the voice feature, it's open for creative ideas. - Jet Movement: The rotating jet part should be controlled by an Arduino and motor. It should move smoothly and in a controlled manner. - Limit Mouth and Eye Mechanism: The robot should have a limit mouth mechanism and limit eye. It's important these parts move in a precise and controlled manner. - 3D Printing: The internal structure of the robot is expected to be 3D printed. Skills and Experience: - Proficiency in mechatronics and animatronics. - Experience in Arduino programming and robotics. - Strong understanding of 3D printing. - Creative problem-solving skills for animatronic design. Collaboration and Communication: - It&#...
...an Arduino based controller however implementation is open to improvements so long as requirements are met. - The basic concept could potentially become a commercial product however I need one to destroy approximately 10,000 cans soon. We could discuss further commercialization of the result if our device works well. - you must be located in the Calgary area and be at least 18 years of age so that you can work with testing filled beer cans at our brewery. No, don't even ask, you cannot volunteer to empty them manually!! If you are not in the Calgary Alberta, Canada area, please do not respond. The ideal candidate for this project would be someone with experience in designing and building similar machinery. You should have a good understanding of mechatronics, pneumat...
The problem: The solonoid valve does not turn off. The voltage on mosfet module output goes from 4.2 V to 4.8 V when motion is detected. It does not goes to 0V and thereby closes the valve. What have i done wrong? I have a simple setup: - Pir sensor AM312 - Nodemcu /ESP (powered by usb) - Mosfet module IRF520 - Solonoid valve 4.5V - External power supply connected to Mosfet 5V, 1A I'm using the following code: const int pirPin = D5; // PIR sensor pin const int mosfetPin = D6; // Connect to the IN/Input terminal on the MOSFET module void setup() { (115200); pinMode(pirPin, INPUT); pinMode(mosfetPin, OUTPUT); ("PIR Motion Sensor with Solenoid Valve Control"); } void loop() { int motionDetected = digitalRead(pirPin); if (motionDetected == HIGH) { (&...
I own a YOLOv8 model formatted in keras-cv and need a skilled professional to convert it into the latest version of TensorFlow Lite. The crucial function of my model is its real-time object detection capabilities. The objective is to utilize this model for object detection on a Raspberry Pi, and this functionality must be maintained post-conversion. Ideal Skills and Experience: - Proficiency in TensorFlow Lite - Experience in YOLOv8 model - Familiarity with keras-cv format - Experience working with Raspberry Pi - Proven track record in object detection models conversion.
I am seeking a skilled programmer who can ...involved are: -Sensor Data Reading: You will develop the functionality to read the altitude sensor data with the frequency of every second. -Data Transfer: The altitude sensor data must be sent as frames of data in real-time over the Internet. -Data Reception: The designated standalone software should seamlessly receive and interpret the data received over the Internet . The receiver device is raspberry pi 3 . Ideal expertise for this project include proficiency in sensor data reading, real-time data broadcasting, and proficiency with standalone software applications. Having previous experience in sensor or Internet data transmission will be considered highly. Please, place your informed bid if your skills align with the project'...
I own a YOLOv8 model formatted in keras-cv and need a skilled professional to convert it into the latest version of TensorFlow Lite. The crucial function of my model is its real-time object detection capabilities. The objective is to utilize this model for object detection on a Raspberry Pi, and this functionality must be maintained post-conversion. Ideal Skills and Experience: - Proficiency in TensorFlow Lite - Experience in YOLOv8 model - Familiarity with keras-cv format - Experience working with Raspberry Pi - Proven track record in object detection models conversion.
I'm in urgent need of a logo for my website and social media profiles. The color scheme I have in mind is raspberry and navy blue. Key requirements: - Logo design for website and social media profiles - Must incorporate the colors raspberry and navy blue I need this done ASAP. The perfect candidate for this job would have experience in delivering high-quality, professional, and timely logo designs.
I own a YOLOv8 model formatted in keras-cv and need a skilled professional to convert it into the latest version of TensorFlow Lite. The crucial function of my model is its real-time object detection capabilities. The objective is to utilize this model for object detection on a Raspberry Pi, and this functionality must be maintained post-conversion. Ideal Skills and Experience: - Proficiency in TensorFlow Lite - Experience in YOLOv8 model - Familiarity with keras-cv format - Experience working with Raspberry Pi - Proven track record in object detection models conversion.
I own a YOLOv8 model formatted in keras-cv and need a skilled professional to convert it into the latest version of TensorFlow Lite. The crucial function of my model is its real-time object detection capabilities. The objective is to utilize this model for object detection on a Raspberry Pi, and this functionality must be maintained post-conversion. Ideal Skills and Experience: - Proficiency in TensorFlow Lite - Experience in YOLOv8 model - Familiarity with keras-cv format - Experience working with Raspberry Pi - Proven track record in object detection models conversion.
I own a YOLOv8 model formatted in keras-cv and need a skilled professional to convert it into the latest version of TensorFlow Lite. The crucial function of my model is its real-time object detection capabilities. The objective is to utilize this model for object detection on a Raspberry Pi, and this functionality must be maintained post-conversion. Ideal Skills and Experience: - Proficiency in TensorFlow Lite - Experience in YOLOv8 model - Familiarity with keras-cv format - Experience working with Raspberry Pi - Proven track record in object detection models conversion.
I'm in need of a skilled PCB designer who can create a single layer PCB for use in medium-sized consumer electronics. i need to put together a pcb design to include 4x 8x8 led matrix with display driver and a arduino. Requirements: - Design a single layer PCB - Suitable for consumer electronics - Dimensions between 5 cm and 10 cm Ideal Skills: - Experience in single layer PCB design - Proficiency in consumer electronics' PCB requirements - Ability to work within specific size constraints
I'm in need of a skilled mobile app designer who can redesign an existing android app and also make for IOS. there will be two versions (android / Ios) EDITED: this project is not only to change the color or the images to the current app. you need to know about programation in arduino, bluetooth and android ,, because this app will manage a lock using the smartphone. I send you the current android app in order that you could understand and know how the buttons work please do not offer your job if you can not open the current job and see how it works Key Requirements: - The design modifications primarily focus on be friendly and easy to use - For the user interface, I'm looking to make changes to the color scheme, font styles, and the overall layout. - In terms of ...
I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering
I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering
I need a professional to connect my OAK PoE camera with a Raspberry Pi 5. I have the camera working perfectly fine on my DELL computer. However, I'm unable to use the camera with my Raspberry Pi 5. This is what I've done so far. 1. I first installed the pip3 and Python 3 Virtual Environment by running. - sudo apt install -y python3-pip python3-virtualenv 2. I then created and activated the Virtual Environment by running. - python3 -m venv projectsenv - source projectsenv/bin/activate 3. Then I installed opencv while inside the virtual environment - pip3 install opencv-contrib-python 4. After that I installed the depthai dependencies for Linux (still in the environment) - sudo wget -qO- | bash 5. Then I installed depthai (still in the
I need a professional to connect my OAK PoE camera with a Raspberry Pi 5. I have the camera working perfectly fine on my DELL computer. However, I'm unable to use the camera with my Raspberry Pi 5. This is what I've done so far. 1. I first installed the pip3 and Python 3 Virtual Environment by running. - sudo apt install -y python3-pip python3-virtualenv 2. I then created and activated the Virtual Environment by running. - python3 -m venv projectsenv - source projectsenv/bin/activate 3. Then I installed opencv while inside the virtual environment - pip3 install opencv-contrib-python 4. After that I installed the depthai dependencies for Linux (still in the environment) - sudo wget -qO- | bash 5. Then I installed depthai (still in the
Setup: 6 amp Stepper Motor With External Micro Controller. Two Buttons (switches) Desired Action: Press and release button #1 motor CW, accelerates and travels to an assigned location, decelerating to a stop. Pressing this button a second time will stop the motor. Press and release button #2 motor CCW, accelerates and travels to an assigned location, decelerating to a stop. Pressing this button a second time will stop the motor.
More details: What is the primary reason for encrypting the Raspberry Pi 4 OS and inside files? Protect sensitive data What encryption level do you require for your sensitive data? 256-bit encryption Are there specific files or data types that need to be prioritized in the encryption process? Program and System Files
More details: What type of communication method would you like the smart watch kit to use? GSM Do you want to send only text messages or multimedia messages as well to the smart watch? Only text messages What type of phone will you be sending messages from to the smartwatch? iPhone All I require is a code which enables me to send messages from my iphone 11 onto this Arduino board.
We need to develop a unique exterior design for a Raspberry Pi case that incorporates the company's colors and logo, ensuring easy connection to the relays found on the RPI Relay board. The Raspberry Pi will be installed inside the case and does not require IP65 protection. The back of the case should feature two small notches for wall mounting using 2 stops. All ports need to be accessible.
I'm in need of an Arduino ESP32 BLE Beacon that can help me locate my position. Its key function will be to triangulate its position based on three central beacons in an indoor environment. Key Requirements: - The main goal of this project is to create a beacon that allows me to know my position inside indoor spaces, such as offices and warehouses. - The system should be designed to provide a medium level of precision in position tracking, with an accuracy of up to 5 meters. Ideal Skills and Experience: - Proficiency in Arduino and ESP32, with a strong understanding of BLE (Bluetooth Low Energy) protocols. - Prior experience in designing and developing beacon systems for positioning. - A solid understanding of indoor positioning systems and the challenges they may p...
...ready, into an existing C++ codebase designed for ESP32 arduino. Here is the specifics: - Integrate user authentication functionality, file input/output, and error handling into the previous codebase. - Implement RTCM messages code for real-time positioning corrections, data integrity checks, and network communication. The successful candidate will ideally have the following skills and experience: - Proficiency in C++ programming, including libraries and message coding. - Extensive understanding of RTK library and RTCM messages. - Experience with ESP32 Arduino. - Strong troubleshooting and problem-solving abilities. The original code is completed. All you need to do is adjust and ensure its seamless operation with the ESP32 Arduino code. Your work is vital in e...
I'm seeking a skilled developer with experience in C++ for a project involving the Raspberry Pi. The task at hand is to create an application that can take a 50Hz 1024x640 video stream from a remote URL and display it on a local monitor through the HDMI output. Key Requirements: - The application must ensure the playback of the video stream without dropping frames. - The latency between the incoming video stream and its display on the local monitor should not exceed 2 frames. Ideal Skills and Experience: - Proficiency in C++ is a must for this project - Prior experience working with Raspberry Pi would be a significant advantage - Experience in real-time video streaming and low latency applications would also be highly beneficial. Please note that the primary use o...
...solution, I'm seeking guidance from a skilled freelancer experienced with both Raspberry Pi and Asterisk server setup. Key Project Details: - I do not require a full-fledged PBX setup, just a basic VoIP service facilitated through my Raspberry Pi. - The primary feature I'm interested in implementing is voice calling. Required Skills: - Proficiency in configuring an Asterisk server on Raspberry Pi. - Strong understanding of VoIP and related protocols. - Ability to guide and explain the setup process clearly. Your Role: I've tried to set it up but no voice can be heard on the other end. So this task is mainly a trouble shooting job. Your primary role will be to walk me through the setup of Asterisk on my Raspberry Pi, ensuring proper configur...
...transfer from Raspberry Pi 5 to a PC over a static network configuration. The project involves an underwater camera and sensor data. Tasks include: Supply Python client and server scripts on a PC and rpi5+camera over a static IP network connection. Using the picamera2 module to stream video to PC. The video is recorded on the PC (time stamp for file name), with text overlay on the video showing PC date and time. UDP for simple 2way communications of small 'hello world' type text strings between the RPI5 and PC. Happy to control everything from the python script on the PC at present with a simple window for viewing the video. No GUI required at present. You should have a deep understanding of Python, experience with video streaming and data transfer, and background w...
Estou desenvolvendo um projeto com a seguinte proposta: fazer a medição e análise de vibração de um motor. Características: estou utilizando um sensor MPU6050 para fazer a medição analógica da vibração. Esse componente é um acelerômetro e consegue medir a aceleração nos eixos X, Y e Z. Estou usando uma ESP32 para fazer o processamento e fazendo a programação dele através do Arduino IDE. Preciso que o MPU6050 faça a medição nos três eixos e com base nos valores coletados, o programa consiga aplicar a Transformada Rápida de Fourier (FFT) desses dados, convertendo os valores do domínio do tempo para o da frequência, ...
We are seeking an experienced PCB designer to develop a custom printed circuit board for a Raspberry Pi 4 Model B application. The project requires integrating specific components and ensuring the design can be enclosed within a standard industrial box. The successful applicant must have experience with power management and GPIO pin utilization. Key Requirements: - Experience with Raspberry Pi designs and GPIO pin functions. - Ability to integrate electronic components such as 5V relays into the PCB with high precision. - Familiarity with standard industrial connectors and terminals. This project aims to create a highly functional and reliable hardware system. Only applicants with a strong track record in custom PCB designs and the ability to work to exact specifications s...
I'm seeking a capable programmer with expertise in using C and Atmel Studio and a good understanding of Atmel microprocessors. The pro...in using C and Atmel Studio and a good understanding of Atmel microprocessors. The project involves developing a Simple Program capable of: - Reading analog sensor values - Reading digital input signals - Controlling digital output signals Using a combination of analog and digital inputs and outputs is key to the project, so demonstrated experience in this area is required. Prior knowledge of Arduino would also be beneficial. The right freelancer should be proficient in microprocessors, specifically with Atmel typed ones, and comfortable using both digital and analog inputs and outputs. Familiarity with wireless communication protocols is ...
I need help using Squareline Studio and having arcs that are displayed on a touch screen to print their values to the serial monitor of Arduino IDE
