使用PYTHON或者C++开发一个LNA测试程序，有如下功能 - 控制SIGNAL GENERATOR产生信号（通过GPIB,VISA) - 控制SPECTRUM ANALYZER测量信号（通过GPIB,VISA) - 根据测量信号计算LNA增益，1DB压缩点，IP3 - 改变仪器设置频率，在多个频点做上面描述的测试
You need provide the PinBoard protocol for 4080 Keysight .Let me develop a device that can replace Keysight PinBoard according to the protocol you provided. Preferably someone who has participated in or been exposed to the development of Keysight4080 PinBoard.
I need someone to produce the requirements outlined in the attached document. This is pretty trivial Keysight ADS work. I would like the outcome to be sent via pdf. Please open a line of discussion to talk about anything related to the project. Thanks!
...create a Low Noise Amplifier (LNA) tailored for the telecommunications industry. This project aims to develop an LNA that operates in the 8–12 GHz frequency range, with specific attention to gain, noise figure, and bandwidth specifications. **Requirements:** - **Design an LNA** within the 8–12 GHz frequency range - Ensure the **LNA meets specified criteria** for: - **Gain:** Achieve the highest possible gain within operational parameters - **Noise Figure:** Minimize noise to enhance signal quality - **Bandwidth:** Ensure broad enough bandwidth to support telecommunications applications - Utilize **Gallium Arsenide (GaAs)** technology, leveraging its benefits for high-frequency applications **Ideal Skills and Experience:** - **Prov...
Hi I`m looking for freelancer, who can make children car models but for real use. Design, technical design and details. In best way, we need team, who can design and give suggestions and links for all technical things, details, etc. So, we need: -design -technical draw, so that we can give to builder and they can make it. At the end we will need 3-5 different car designs, but lets start with one. There for, body should be used for all models. Body should be easy to make, put together. Electric or/and gas engine (like honda 125-200cc engine). I also should know which engine, battery, steering wheels, suspensions, etc. you should show where is possible to buy them with nice price. body we will weld ourself. when you bid for project, please describe what you can d...
I am in need of an experienced programmer to develop a Keysight VEE program to automate test and measurement processes. This program should have specific functionality as laid out by myself, and I am counting on the programmer's expertise to create a program that meets my needs. The program should be completed within a month. This is a great opportunity to use your skills to develop something that could potentially improve and simplify my test and measurement processes.
...engineer to design an antenna LNA for my project. The antenna needs to cover the MHz frequency range. The desired gain for the LNA is 48dB, with a noise figure of less than 1.5dB. The bandwidth should be between 1550-1620MHz. The size of the antenna should be 50*50mm. Deliverables: Provide all design files. Diagram, Simulation files, Schematic and PCB files, Gerber & BOM files. Requirements: 1. There is a hole via for the feed pin in the center of the LNA board for the GNSS patch antenna. The hole via is the input of the LNA board, and the output is the solder pad connected to the RF coaxial cable. 2. Since the LNA consumes power, RF signals and DC 3.3V are transmitted together through the coaxial cable. So the LNA board re...
We are looking for a programmer who has extensi...zone is a plus and will require the engineer to have a solid PC and internet connection. All work will be performed on live equipment via AnyDesk. The engineer must have a STRONG mathematical background for calculations. These calculations will require a quality assurance validation and must be provable in a critiqued environment. Major manufacturers we support include but are not limited to: Keysight Tektronix Fluke Rigol Siglent LeCroy GigaTronics and much more. We will interview many candidates and may actually hire more than one if we find suitable freelancers. This is a long term job and we are looking for great team players. If you believe you have the skills for this job, please do not hesitate to contact us to setup an ...
...work live with us looking on. All measurements will require "proof" of accuracy and we will not accept poorly written code. If you are bouncing us between your current job and another job, that will not work. We are looking for someone who is available to us on our time CST and the requirement to code quickly and easily. Typical manufacturers that we support are Tektronix, Agilent, Fluke, Keysight, Rohde and Scwartz, Siglent, Rigol and much more. Typical time to write a procedure from start to finish is 3 days or less for a solid programmer. Obviously, more complex procedures will require more time to accomplish - conversely - simpler procedures should be handled in less than 3 days. If you are the perfect match you can count on working with us for months - possibl...
We are looking for someone who has a lot of experience working with microwave equipment. Items that can go up to 50 GHz. Manufacturers would include Keysight, Tektronix, Anritsu, Fluke, Gigatronics, and so on. A background with C++ is desirable as well. A strong, VERY strong background in math will be required as there are a lot of calculations involved. A knowledge of GPIB as well as communication via USB is required.
...the above mentioned items. Spectrum anaylzers with a frequency range up to 50 GHz - power sensors made by Keysight technologies or Ballentine - Signal generators from Rigol and Siglent - scopes from Tektronix. If you know equipment like this or work around equipment like this, we want to interview you. If you are successful with us, this is an indefinite job that will last years. You must have the ability to troubleshoot your code, accurately record data, be sharp with graphics, debug on the fly, and capable of writing GOOD code. Talk to us and see if we are a match. If so, this will be a great opportunity for you and for us. Keywords are as follows: Tektronix Rigol Siglent Keysight Agilent Hewlett Packard Fluke Spectrum Analyzers Oscilloscopes Microwave CDMA TDMA and ...
Design Oscillator circuit using Keysight Advanced Design System (ADS)
I'm looking for a talented freelancer to design and prototype a 2.4GHz RF power amplifier for WiFi router. Specifically, I'm looking for a high efficiency PA which should be designed using the surface mount PCB assembly method, with maximum power input 18dBm and with an output power of 33dBm. Amplifier must be bidirectional. Technical requirements: - SKY-65900-11 must be used as PA for TX' - SKY-13377 + LNA for RX - Power: 5V - soldering pads - Connectors: Input - soldering pads, Output - SMA - Size: 36mm * 12mm PCB shape in attached files - Output: KiCad project + prepared Gerber files with BOM for assembly ordering on PCBWay/JLCPCB/etc I'm expect the freelancer to have experience in RF circuit design and to be able to provide a prototype unit by ...
Case study 1- Tim Long, newly launched IT Hardware and Communications analyst, recently launched on the sector. His top pick is Motorola Solutions, Inc. and he is looking for ideas on how to convince MSI to do a Non-Deal Roadshow with him. Using the attached initiation report (casestudy 1 ) and the 13F holding data (Case study1 ) for MSI and its comparable companies (MSI, Keysight, Corning) please put together a short ppt. presentation that Tim can send to MSI. The ppt should include: Slide 1- Executive Summary /Current Investment thesis (includes icone,shapes, charts,graphics) Slide 2-Shareholder analysis by region (indepth analysis) Case study 2- Please build a regional account database, by sector. Refer to file Case study (Regional Acct DB).xls a. Use the account
About NH JAG Open HOuse: NH JAG Recruitment Event It's a great time to become and LNA Healthcare Training Program coming to the Berlin area Want a career in healthcare? Get started with a no cost LNA training Everyone welcome, specialist on hand for enrollment Project Description: Something that will stand out catch people's eye. I have 4 logos that need to be placed at the bottom
Need to create 10 slide power point you will find the full requirements in the attachment’s
hi I need a filter design (receiving only) for VHF and UHF + LNA + RF Switch and a splitter. I'm looking for experienced designers only, with proven projects. also need to design PCB layout. thank you.
PART_1 I want to control an Arcus DMX-UMD-23 stepper motor. Here is the link to the stepper motor manual an...size), so we need a control on the screen to do that by choosing the step size. 5. we want a box on the screen that given an input of "X steps", when we press the button, the stepper moves that amount of steps. 6. we want a slider on the screen, such that moving the slider moves the stepper. A greater movement of the slider moves the stepper more. PART_2 I want to read the frequency from a Keysight 53210A frequency counter. We are using the 2nd port on this counter, and the frequency we will measure is approx. 4600 MHz. I want a display on the screen that shows the frequency and updates once a second. I want the capability to change the update from 1 second...
I am looking for Keysight ADS expert to run 3D high speed simulation for PCB
Hello Everyone, I want to design an RF Energy harvesting circuit. Therefore, I would like to develop a simple circuit on Keysight ADS, do the simulation, and get the expected results before fabrication. If any of you could help me design the circuit with higher efficiency and dc output voltages then it would be a great help. I would be paying more than the above-mentioned price if someone could help me complete it within 2-3 days with all the requirements fulfilled. Here are the requirements for my circuit. 1. The rectifier should be of dual-band that can operate at two different frequencies of 900 MHz and 1800 MHz. 2. I will be using an antenna of 50 Ohm as an RF source. Thus, the impedance matching between the rectifier and the antenna should be able to handle those...
Task: Create and simulate power-ground planes layouts without and with decoupling capacitors in ADS Software: Keysight ADS Design: Layout, Schematic and EMModel Simulations: S-Parameter, Near field and Far Field Please look at the attached pdf for descriptions and images.
--3 years of Wi-Fi 5/6 FAE experience on the system board tuning and the good skill for VNA, spectrum analyzer and Wi-Fi test equipment as Lite-point, NI or Key sigh, etc. --The customer requirement communication including the discrete Wi-Fi RF components as PA, LNA, switch, filter and RF front-end module (RFFM) and proprietary SOC. --The RF BOM optimization on the customer Wi-Fi system board to achieve the customer specification and the technical report generation
...scan direction, stepped or continuous mode) Configuration of different connected instruments and Sensors Storing configurations and custom settings, recalling stored configurations, saving measured data in pre-defined file formats Real-time monitoring of acquired data with the ability to pause and save partial data set Supports concatenated batch runs Support for commercially available Keysight, Rohde & Schwarz and Anritsu RF instrumentation Measurement abort on user defined critical events Resuming unfinished measurement Analysis Mode features Raw data 2D/3D plotting in different formats Mathematical Function/Data based surface generation and Surface comparison plot Raw data filtering, smoothing, slicing, averaging Data manipulation (re-arrange axes, merg...
An Oscillator need to be designed using Dielectric resonator in feedback network at 7 GHz and active component (GaAs FET) with good stability factor and gain , in Keysight ADS software tool, Spectrum and waveform to be analysed of overall circuit.
Hello ı need to support about using keysight ads program
Hi i need a java deeloper to write a software that send/receive data from 3 different external sensor via serial port. We use an Arduino (we wrote the firmware) and a Keysight sensor (with native libraries for Java). Our software should -> receive data via serial port and store them into a mysql database -> send data to our Arduino board -> a web dashboard to see and manage data with login -> works on JBoss server This software should be release in 45 days and after there will be other step to dev. So this is the 1 step of 4.
A super low noise amplifier in the C-Band frequency range 5.50 to 6.50 GHz shall be designed. The noise figure shall 0.75 dB max. and the gain between 15 dB to 30 dB with a ripple of +/- 0.5 dB. The LNA shall be powered via the coax cable, but it is not a must. External DC 12 to 18 Volts Input and output connectors SMA or N. If a design is available and can be used will be fine. PCB design shall be done for Rogers or similar high frequency laminat to get the low noise figure. Attached a typical example of a low noise amplifier for microwave frequencies.
...Currently working in any company below *The candidate does not need to represent his/her company for the interview. Please refer to the interview questions at the end of this message. *We will need the business name card and company website of the candidate to see if he/she meet our requirement. The candidate can from the following list (preferred): 1. PANASONIC IND. DEVICES (M) SDN BHD 2. KEYSIGHT TECHNOLOGIES MALAYSIA S B 3. INTEL TECHNOLOGY SDN BHD 4. 3M MALAYSIA SDN BHD 5. PLEXUS MANUFACTURING SDN BHD 6. PANASONIC SYSTEM NETWORKS M'SIA SB 7. PANASONIC MANUFACTURING M'SIA BHD 8. INFINEON TECHNOLOGIES (M) SDN BHD 9. INFINEON TECHNOLOGIES (AD LOGIC) SB 10. AGILENT TECHNOLOGIES SALES (M) S/B 11. MITSUBISHI ELECTRIC (M) SDN BHD 12. SAMSUNG MALAYSIA ELE...
hi there i need someone who know ADS software i have the files i jsut dont know how to run them please inbox me for further details marcray
Design the LNA on ADS software only. The Design we will make its specification are;- 1. Frequency range-1 GHz-3 GHz (wideband). 2. Gain-30 dB. 3. Noise- less than 0.4 dB. 4. CDR (Compress Dynamic Range)- 70 dB. 5. SFDR- 110 dB. Following attached Papers will be helpful. The above specifications need to be strictly followed despite of the example given in one of the attached pdfs. Thanks!
I have a digital Transceiver designed in schematic and layout level. This designed needs to be analyzed using ADS keysight software or any other RF tool. Freqnecy and gain graphs needs to be show.
Looking for someone with RF microwave knowlege who knows keysight ADS software
We in our lab use Scanning Tunneling Microscope (SPM 5500 Keysight Technologies) for measuring conductance of the organic molecule. For that we use log module amplifier which is shown in the attached file. However the module is not working anymore and we cannot order another piece because it is a discontinued product now. We do have a schematic of the circuit and want to get it design and made it in PCB. Edit: Please note that the opamp used in this schematic is discontinued. So the circuit design must include the equivalent replacement of OPA129U
...need to be close to Columbus, Ohio to meet with the team at least once a week. The rest of the work can be done remotely from home! Requirements: Proficient in CB Design Tools: such as Capture CIS (For Schematics), Cadence PCB Editor (PCB Design) OPTIONAL- Viewmate (Panel Design) Keysight Advanced Design System (ADS) Experience. Experience in debugging hardware with Network Analyzer/Oscilloscope. Ansys HFSS Antenna and Electromagnetic Simulation experience Comfortable reading electrical schematics and understanding basic circuits. Degree in Electrical Engineering or equivalent, with concentration in radio frequency design or sensor technology or related technology discipline preferred. 3+ years’ experience in a research or develop...
I only need Code - Connecting two Score Keepers wirelessly so both displays update simultaneously. Concept: Scorekeeper A and B has...and B has 2, 2 digit displays for Team A, and Team B. controls are button 1 team A add 1 to score, button 2 team A minus 1 from score. Button 3 team B add 1 to score button 4 team B minus 1 from score. Button 5 reset both scores. If buttons are pushed at scorekeeper A score keeper B updates and vise versa buttons pushed at keeper B updates score keeper A My Hardware Arduino Uno's Rev 3 nRF24L01+PA+LNA Antenna Wireless (50ft distance) nRF24 socket Max7219 LED Driver Uxcell common cathode 1 Bit 7 seg LED (two Bits per Team, 4 per Keeper) Coms LED to verify the Arduinos are connected Code for a 3rd display without buttons but comment that section t...
As you can see at the main topic, I need to design 2 - 3 DGS (except dumble DGS) structure engraved on microstrip lines. The program I want to use for this project is CST, I need the S - parameters of these designs. CST STUDIO SUITE ELECTROMAGNETIC FIELD SIMULATION SOFTWARE Schematic and PCB design Embedded Software/Firmware development Analog and Digital circuit design and simulation using Altium, Multisim and Proteus RF Antenna and Circuit Design and Simulation using CST and Keysight ADS. Development Tools
...through the Collection of data and transformation of the data to the waveform via function generator and excel is a motion sensor project whereby sensor/waveform is used for activation, interaction and interoperability of various objects objects. Do you understand the function generator? We have two important applications or tools including Spider-Robot and Function generator (example KeySight function generator 33511B) and the related activation, interaction and interoperability of objects. IRE range of 0 to 100 (IRE =Institute of Radio Engineers) can be used to monitor the waveform. The web is a built environment that comprises of devices that can produce the data. Here is a list of different types of devices for the generation of the functions or function generation. Desktop...
I would like 3 separate C# examples that can take a screen capture from Tektronix TDS-7404B(GPIB and TCP/IP) and TDS-5104B(GPIB and if possible TCP/IP) and save the image to the pc. The project should work on Windows 10 and can be console app or windows form. Example 1 using with Agilent/Keysight IO Example 2 using ; and using with Agilent/Keysight IO Example 3 using with National Instrument IO. This example should not use the ReadToFile. All examples should Read and Write Bytes. I do not have an instrument available for development. I can however test the projects for you.
Need measurements of the ambient RF field strength and its direction of arrival over 360 degrees of azimuth in the band 19.3-20.2GHz where the antennas will operate in several locations. Measurement requirements Use a directional, calibrated antenna with low noise amplifier to measure the signal power of each signal. From the known gain of the antenna, LNA and cables, express each measurement as a signal strength in dBW/M2 Mount the antenna at least 3m above the ground, with its boresight aligned horizontally towards the horizon. Rotate the antenna in azimuth with steps no greater than the 3dB beam-width of the antenna. At each azimuth step, make the following measurements and record them; • the azimuth angle • the time of day (UTC or local) • using a s...
...North Management Services LLC RFI Measurement Requirements Purpose To measure the ambient RF field strength and its direction of arrival over 360 degrees of azimuth in the band 19.3-20.2GHz where the antennas will operate. Measurement requirements Use a directional, calibrated antenna with low noise amplifier to measure the signal power of each signal. From the known gain of the antenna, LNA and cables, express each measurement as a signal strength in dBW/M2 Mount the antenna at least 3m above the ground, with its boresight aligned horizontally towards the horizon. Rotate the antenna in azimuth with steps no greater than the 3dB beam-width of the antenna. At each azimuth step, make the following measurements and record them; • the azimuth angle • the t...
On Site Project in Noida for 2 weeks , Experience Required - 3 to 5 years Scope of the work includes modifying a existing python code for the drivers of the Keysight etc devices for AC power source, Electronic DC load, Oscilloscope, RF signal generator, RF spectrum analyzer, power Amplifier, temp chamber, Data acquisition unit (Data logger
I have project for LNA design. If you know that, please let me know.
I designed an electronic circuit, but I’m not a professional engineer, so I need my schematic and pcb layout being checked. It’s a battery powered device with attiny, gsm modem and gps ( and antenna with a lna). It has to be optimized for long life on battery, low power consumption and stability
...Range: 400-470Mhz Gain: 30dBi 433mhz antenna Polarization: Vertical VSWR: 1.8 Input impedance: 50Ω Antenna height: 185mm (150mm for spring) Cable: 3m RG58U or customized Connector: SMA male or customized *Signal Amplifier: LNA 50-4000MHz RF Low Noise Amplifier Signal Receiver Module Shield Board SPF5189 Deion: LNA: 50-4000mhz NF: SPF5189Z LNA0: 0.6 dB Amplifier: FM Color: green Size: 23*28MM * Cable that connects the esp32 to the amplifier:
This project is to make a product brochure in Word for...Include from the respective web page: The title, all the text, all the photos and graphics, along with the respective text that appears with the photo or graphic. Please copy the text directly as it is without changing the wording. This is not plagiarism because I own the website data-alliance.net. Required to complete this project within 24 hours.
