...的按键发送不同的键值，从event0读取；外接USB键盘驱动最好也从event0读取。 5. 其他GPIO驱动 每个GPIO口都可以通过驱动设置输入/输出。 6. 触摸屏驱动和外接USB鼠标驱动 7. 触摸屏驱动和外接的鼠标驱动设备文件最好固定，例如触摸屏固定使用event2，USB鼠标固定使用event3。 ENGLISH Basic Requirements for Hardware Resources of T3 Core Board Basic Hardware Resources 1. Power Supply DC power input, 5V single power input, CPU can detect whether this power supply; Battery input, lithium battery power input; Real-time clock power supply, use button battery; 2 Display interface to support RGB, LVDS and MIPI interface, as only one interface can be used at the same time, so the three interface pins can be reused; 3. Touch screen interface resistive screen interface, the use of ADS7846 or compatible chip, using the SPI interface; Capacitive screen interface, the use of IIC inter...
I'm currently seeking a professional with experience in Battery Management Systems (BMS) to design and develop a LiFePO4 BMS. The key requirements and features include: - BMS should support 8S and 4S configurations - Maximum amperage capacity of 100A - The ability to alter the BMS ampere capacity by adding or removing MOSFETs or any other relevant hardware as required - The BMS should include essential safety features such as: * Temperature monitoring * Short circuit protection * Cell balancing * Reverse polarity protection - The system should allow for charging and discharging through the same port I need this project to be completed within a month. Ideal skills and experience for this job include: - In-depth knowledge and experience in BMS design, particularly w...
...intermediate Matlab skills to help optimize the energy efficiency of a battery system for renewable energy applications. Key Project Requirements: - Optimize battery system for energy efficiency: The primary focus of this project is to ensure that our battery system operates with maximum energy efficiency. This involves assessing current battery performance and implementing improvements in its energy consumption. Ideal Candidate: - Intermediate Matlab Proficiency: The perfect candidate for this project should be proficient with Matlab, having experience in battery system optimization. Previous work in the field of renewable energy systems would be a bonus. The goal of this project is to enhance the energy efficiency of our battery system. You...
...implementing IoT solutions in the supply chain - Analyze the impact of IoT on the supply chain for lithium-ion battery production Ideal Candidate: - Extensive experience with IoT and its applications - Proficient in Python development and cloud data management - Comprehensive understanding of supply chains, specifically in lithium-ion battery manufacturing - Familiarity with PLC & SCADA, Edge Computing, wireless sensors and gateways - Strong research writing skills to aid in the comprehensive explanation of findings - Knowledge of MATLAB and Statistical Analysis tools would be an advantage. Your contribution could profoundly impact the efficiency and resilience of lithium-ion battery supply chains. Your work will not only provide immediate value to this resea...
...alternately to represent the emergency lights. The motor will power the back wheels and the sound will play through a small speaker as a siren and horn. Here are the requirements for the project: I believe the Arduino MKR Zero would be a good fit since it has the integrated micro SD card holder and sound processing capabilities. It also has an integrated battery charger. The Arduino needs to be powered by a rechargeable Lithium Polymer battery like 3.7 Volts. - Control LEDs: I believe I can get by with two white 3mm LEDs. I will install fibre-optics to transfer the light from the LEDs to various lenses on the fire truck. The LEDs should flash alternately. - Control Motor: Apart from the LEDs, the circuit should also be able to control a small 3-4 V motor. A potentiome...
I'm looking for a skilled programmer who can create a battery level indicator program for an Lithium Battery. The program will be used to interpret battery level data and display it via LED indicators. Key Points: - Device: The program is specifically designed for an Lithium Battery; thus, knowledge of embedded systems is must needed, which includes both Hardware & Software Design - Programming: Proficiency in C/C++ is essential for this task as it is the preferred programming language. - Display: The battery level will be depicted through LED indicators. Experience with LED technologies or similar display systems is advantageous.
Wiring Schematic of an Agricultural Articulated Truck (Tractor), new project needs schematic and design. Key Components: Power Supply: Battery Alternator Main Circuit Breaker Lighting System: Headlights Tail Lights Work Lights Indicators Control Systems: Ignition Switch Dashboard Controls Relays and Fuses Engine and Transmission: Starter Motor Engine Sensors Transmission Controls Hydraulics: Hydraulic Pump Controls Joystick Controls Hydraulic Solenoids Auxiliary Systems: Air Conditioning Horn Wiper Motor Fuel Gauge
...devices you’ll need a system to digest and understand all of the data coming in -Comparing fleet tracking devices Functionality Technical specifications Cost -Choosing fleet tracking devices for specific applications Plugin Hardwired Dashcams Rugged/exterior mounted applications - construction, landscaping, etc. Remote deployments Battery powered Solar powered Kill switches Temperature sensors -Is it legal to install fleet tracking devices in my vehicle? - Disclaimer: we cannot give legal advice, seek professional advice for your particular situation - in most states where the company owns the vehicle, yes...
I'm in need of a professional landscape designer to create landscape plan for attached drawings. auto cad file is available. This project requires a creative mind and an eye for detail. Key requirements include: - Designing a landscape plan for around buildings and drive isles....Incorporating synthetic lawn small-medium tree in front of each unit - Including garden beds with Xeriscaping landscaping method developed especially for arid and semi-arid climates that utilizes water conserving techniques Ideal candidates will have: - Previous experience in large residential landscape design - Proficiency in using design software and tools - Strong understanding of different types of flora and fauna - Excellent communication skills to understand my vision and translate it into a b...
I'm searching for a CAD designer to help create a Lithium-ion battery module which will later be used in a radio. The primary goal of this project is to design a battery module that possesses the following characteristics: - Lithium-ion: The battery module should be based on lithium-ion technology - Prismatic: The battery should have a prismatic shape. This is to ensure it can be integrated seamlessly into the radio design. I'm looking for a CAD designer with experience in battery module design. Experience with lithium-ion batteries, prismatic batteries, and if possible, relevant experience with radios would also be beneficial. The designed battery module should have a capacity of 1000mAh. If you're interested in this project, I&...
...the athlete during a game or training session. - Speed Metrics: Monitoring the speed at which the athlete is moving during different phases of the game. - Acceleration and Decelerations: Recording sudden changes in speed to analyze the player's agility and response times. - Heart Rate Monitoring: Capturing the athlete's heart rate to gauge their exertion levels during play. Ideal Battery Life: - The desired battery life for the device is up to 8 hours. It should be able to sustain continuous operation during a typical training session or game. Future Application: - While the initial focus is on soccer, the device should be designed with flexibility to be adapted for other sports in the future. Skills Required: - Proficiency in GPS device design and prototyping...
I require a 10-page paper that focuses on comparing the transition to hydrogen internal combustion engine vehicles with electric/battery-powered cars. This paper should thoroughly explore the environmental impact, cost-effectiveness, and overall performance of these two types of vehicles. Key Areas to Cover: - Environmental Impact: The freelancer must analyze and present a detailed comparison of the environmental impact of hydrogen and electric vehicles. - Cost-Effectiveness: The paper should investigate the cost implications of transitioning to hydrogen internal combustion engine vehicles in comparison to electric/battery-powered cars. - Performance Comparison: A crucial part of the paper will be to comprehensively compare the performance levels of these two types of vehicl...
...light. - Once the Arduino detects that the warning light is on, it must signal for another light to blink. -I want to splice into another warning light on my car instrument panel and use the power feed on that as my input signal for the arduio - I prefer the blinking pattern to constitute 5 blinks, followed by going out. -I can power the board from a 9v battery if using the voltage from the car is too dicey. I don't mind if the battery runs out quick - Final output should be a detailed project scheme, the respective Arduino code for this light blink setup, and instructions on how to assemble...
...with the primary goal being to increase manufacturability. The improved design should reflect in the product's portability, energy efficiency, resistance to weather, and extended battery life. Ideal Profile: - Experience in Product Design - Understanding of Efficient and Durable Design Principles - Knowledge of Power Management for Electronic Devices Your role will involve: - Reengineering the product design for better manufacturability without compromising on aesthetics or functionality - Incorporating features that improve portability, energy efficiency, resilience to weather conditions - Enhancing the battery life of the product. Your contribution will significantly shape the efficiency and user-friendliness of our high-demand enterprise advertisement product....
I'm looking for a talented landscape architect to design a natural and rustic landscape for a lake project. My vision is to predominantly incorporate local plants and trees. Even though, I've chosen to skip the specific features I'd like to add, I'm open to innovative suggestions that align with the desired theme. Ideal Skills and Experience: - Proficiency in landscape architecture - Strong knowledge of local plant species - A creative approach to rustic design - Prior experience with lake or similar projects
***PLEASE NOTE I AM NOT INTERESTED IN RANDOM DESIGNES FROM OTHER BUSINESSES - I WILL BLOCK THE FREELANCER - ONLY SUBMIT DE...Title of position within company: Car Electrician The card should also have space for: Phone number xxxxx email xxxxx Location : City XXXX The card should also show some information regarding services we offer which is: - Key Programming & Cutting - Unlocking Hidden features - Diagnostic & EML clearing - Software & Module updates - Retrofit Equipment - Engine Tuning DPF, EGR & IMMO solutions - Battery Registering - ECU Cloning - Airbag Programming - ****PLEASE NOTE THE FINAL DESIGN WILL NEED TO BE IN 2 LANGUAGES TRANSLATION AND OTHER INFORMATION WILL BE PROVIDED TO WINNING DESIGN***** design is to remain same just the text / logo will be tran...
...professional to assist me in implementing distributed secondary control using Simulink. I want you to simulate this project in Matlab Simulink. I will need the simulation files as well. - The main purpose of the project is to ensure the stability and reliability of the microgrid through an effective distributed secondary control mechanism. - The microgrid comprises of Solar PV, Generator, and a Battery storage system. - The primary power quality issues that require addressing are related to voltage and frequency. - I'll need you to explain the project design once you are done on zoom call or something as I need to write my thesis on this so I'll need know all the details about the project. Ideal skills and experience for this project include: - Proficiency in Simu...
I am looking for a graphic designer to create a captivating logo for my gift ware line business, Sunset Sistas. The logo should mirror our mission of spreading awareness about endangered Australian fauna and flora. Key Requirements: * Please use bold, vibrant earthy tones. The logo must pop with such colors. * The logo should cleverly integrate a combination of a sunset and the Mallee emu-wren bird, an endemic Australian species. * The style should lean towards minimalist and modern, but still convey the environmental focus of the brand. The ideal candidate should have experience in creating logos with environmental themes and is skilled in communicating messages via minimalist designs. Your portfolio demonstrating previous works of similar nature will be highly appreciated.
...against a natural landscape backdrop. Key requirements include: - Logo Placement: The design should incorporate logos at two specific areas - At the entrance of the building and also at the top. Its positioning and scale should complement the overall aesthetics of the building. - Background: The building should be placed against a realistic, beautifully rendered natural landscape. The choice of flora, light, and perspective should harmonize with the building. Ideal Skills: - Proficiency in photography rendering software - Excellent sense of aesthetics and attention to detail - Strong grasp of lighting, perspectives, and scales - Previous experience in architectural rendering would be a plus. Please share your past work which showcases similar skills. Looking forward to s...
I'm looking for a 5kW solar inverter specifically designed for residential usage. It should be equipped with a battery backup system to ensure continuous power supply during outages. Key Requirements: - 5kW Power Output: The inverter should be capable of handling 5kW of power, suitable for residential usage with inductive loads. - Battery Backup Compatibility: It must be designed to work with a battery like lead acid and LifePO4 battery of 48V which will be a 16 string LifePO4 battery.. This is crucial for ensuring uninterrupted power during times of outages or low sunlight. -Tgere whouxl be an lcd screen to do settings and check status. - Residential Suitability: The inverter should be designed for residential environments, taking into account fa...
I'm in search of a skilled developer who can help me design a Battery Management System (BMS) for Lithium-ion batteries. The primary functions of the BMS will be to monitor the health of the battery, control its charging and discharging, and ensure its safety. Key Requirements: - Experience in developing Battery Management Systems - Proficiency in Bluetooth communication protocols - Understands the specific needs of Lithium-ion batteries and how to optimize their performance - Capable of integrating safety features into the BMS to prevent incidents like overcharging or overheating The successful candidate will need to be able to work closely with me to understand the specific requirements of the BMS and design a system that meets these needs. The ability to clea...
I'm looking for an architect to design building plans for an 18 foot habitation box for my expedition vehicle, ensuring it's equipped with all necessary systems for a comfortable journey. Key Points: - **Power System:** It's crucial that this habitation box has a reliable and versatile power system. I need it to include solar panels, a battery bank, and a generator. The architect should ensure that these systems are integrated seamlessly within the design, considering factors like space, weight distribution and ease of access for maintenance. - **Water System:** The design should factor in space and weight considerations for the habitation box's water system. I'd like to have a freshwater tank, greywater tank, and a water filtration system included. The a...
I require a skilled 3D designer to encapsulate a small wearable device with key inclusions of a battery compartment, USB C, and Micro SIM. The purpose of the design is to accommodate an IoT device, ensuring it remains sleek and compact. The utmost importance is placed on the dimensions, so the final design must have a footprint similar to that of a smartwatch. 30 x 30 x 10 mm. Key Skills and Experience: - Proficiency in 3D design software - Prior experience with wearable devices - Understanding of IoT device encapsulation - Ability to work with compact, small-scale designs
...work on a project related to Li-ion batteries. I have already done some work. I don't know about battery modeling on ANSYS Fluent. I am trying to mimic TR using a thermal model. The geometry and the parameters are taken from the research paper (the research paper is attached). I propagated TR using a user-defined function (UDF) on ANSYS Fluent, but I couldn't get a higher cell temperature than the one mentioned in the paper. The UDF contains the data points and Time extrapolated from the research paper (Fig. 5). The heat generation is calculated using q''' = rho*Cp*dT/dt. (The work should be done on ANSYS Fluent). Key Tasks: - Conduct detailed thermal analysis and simulation on a Li-ion battery. - Show the transient response of cell temperatur...
I'm seeking a talented freelance designer to put together a compelling project presentation. It's objective is to pitch a product - a sustainable green energy battery for electric vehicles (EV). The main audiences are investors and the general public. Key work includes: - Crafting a cogent narrative that thoroughly explains the product benefits - Preparing visually pleasing slides to enhance understanding and impact - Ideally, turning technically complex concepts into accessible information. You'll need to have: - Strong background in design with a portfolio showcasing your previous project presentations - Knowledge or interest in sustainable energy and EV technology - Exceptional writing skills to convey ideas clearly and compellingly - Experience in preparing pr...
I'm seeking an experienced engineer/product designer that could build a 3-wheel E-Bike controller. This E-Bike controller should be capable of handling the following features: - Speed Control: The controller should have functionality to manage speed, with a maximum limit of 20 mph. - Battery Monitoring: The controller must include a system that allows for the continuous tracking of a Lithium-ion battery usage. - LCD Display: The controller should be equipped with an LCD display that visualizes the battery status and speed settings. It is essential the freelancer working on this project has experience in product design and engineering, with a strong familiarity in Lithium-ion batteries and how they function within e-bikes. Knowledge of LCD functionality is also n...
... The webapp should be responsive, adapting seamlessly to both desktop and mobile platforms. Key Features: - Show the shortcuts and everything on the initial screen. The location, car color, battery and other params should be able to be set from parameters - Climate Control System: The webapp should have a user-friendly interface for adjusting the car's climate control settings. - Navigation System: Implement a detailed and interactive navigation system. It does not need to work 100% but feel and look like maps. - Battery Status: A central feature of the webapp should be the ability to view the battery status, and navigate to different sections of the menu with ease. Ideal Skills: - Proficiency in ReactJS for a smooth and responsive user interface. Angular is ...
I'm looking for a skilled professional who can design a compact, efficient, and reliable battery pack and Battery Management System (BMS) for a body-worn application. The task involves creating a solution with the following specifications: - **Capacity**: The battery should provide a runtime of up to 2 hours on a single charge. - **Chemistry**: The preferred battery chemistry is Lithium-ion. - **Compact & Lightweight**: Given that this is a body-worn application, the design should prioritize being safe to the human, small and lightweight. - **Safety**: Fast charging is needed but the design must include safety mechanisms to prevent overcharging and overheating. -**Waterproof**: The battery pack should be IP65 rated to be usable in the shower -**...
I require a couple of photorealistic renders of a product using a high-resolution image from my step file. This rendering is going to be used for product visualization purposes. Please provide a render of the cabinet front on (with the door closed), a render of the cabinet with the door open from a slightly offset perspective, and a render of an individual battery module also from a slightly offset perspective. Key Requirements: - The step file already contains all necessary details including colors and materials to be used in the rendering. Ideal Skills: The ideal freelancer for this project must have a strong understanding of graphics and rendering techniques capable of producing high quality, photorealistic images. Experience in creating product visualizations from step fi...
I'm seeking a creator skilled in 3D animation to craft an engaging educational video. The primary focus will be on the basic operations of lithium-ion batteries, coupled with illustrative aspects of how cooling systems work in sync with these technologies. Key Features:...complex science of lithium-ion batteries and their cooling system into an easily digestible overview. - Target Audience: The video will serve as an educational tool for college students, so the content should be academically accurate, yet easy to understand for non-experts. Ideal Skills and Experience: - Previous experience creating animated educational content. - Understanding of lithium-ion battery technology. - Capable of simplifying complex concepts into clear, compelling visuals. - Proficiency in 3D a...
I'm seeking a skilled Autocad designer to produce 7 realistic images of prismatic battery modules. The images should: - Be highly detailed with textures and materials - Present the modules from a disected view Ideal candidates should have experience in creating technically detailed images, and have a strong grasp of Autocad's capabilities. Previous experience in designing battery modules or similar technical components would be a major asset.
I need a mechanical engineer with experience in product enhancement to improve the design of a wearable exoskeleton robot product. Key aspects to be addressed include: - Improving the adjustment and attachment aspects of the product, specifically in relation to Straps and fasteners, Joint movement range, Comfort padding, IP65 rating, Battery pack integration, Electronics and wiring integration, Adjustment to waist width and depth. Ideal skills: - Strong mechanical engineering background - Experience in product development - Proficiency in working with wearable technology products is a big plus - Knowledge in ergonomics, performance enhancement, and aesthetics - Ability to understand and meet user needs through custom adjustments I'm looking for someone who can combine ...
I'm seekin...main task involves creating a system capable of monitoring and optimizing two key parameters: the power output of a generator and the state of charge (SoC) of the battery within the microgrid control system. Ideal candidate will have: - A strong background in reinforcement learning. - Proven experience with microgrid systems. - Understanding of energy management, specifically load shedding, power scheduling, and voltage regulation. Expected outcomes of this project should include: - A sophisticated microgrid control system capable to adapt within changing conditions. - Real-time optimization of the generator's power output and battery SoC. - Efficient control actions to manage and balance energy resources. Please provide examples of similar projects...
I'm in need of a talented designer who can create a custom case for a digital stop watch that will primarily be used for sports timing. Key Requirements: - The case should have an ergonomic grip, similar to that of a Seiko S141. This is crucial for comfortable handling during sports activities. - The design must be compatible with micro boards, a battery, and an OLED display. I would like to use Arduino pro micro and a small 1.5" display Ideal Skills and Experience: - Proficiency in product design and CAD software to develop the case model. - Prior experience in designing sports equipment is highly preferred, to ensure the final product meets the specific requirements for this kind of usage. - Knowledge of materials to be used in manufacturing for both durability and com...
3d animation of battery containers on a barge
I need an expert in renewable energy and optimization in Matlab to help me with a specific project. The project focuses on the optimization of energy storage systems, with a specific focus on batteries. Key tasks include: - Utilizing Matlab to model and ...determine the most efficient storage configurations. - Analyzing and interpreting the results to provide practical and insightful recommendations for energy storage optimization. The ideal freelancer should have: - Proficiency in Matlab and experience in the field of renewable energy. - Proven experience in optimization, preferably with a focus on energy systems or similar. - Specific experience with battery energy storage systems would be highly beneficial. - Strong analytical skills to interpret results and provide actionable...
I have an STL file for a battery box. It consists of a bottom and a top part, that are connected with a simple hinch. On the other side the box is being closed with a latch, see blue circle in image. The problem is that this latch is breaking off because it is not sturdy enough or the tolerances are just too tight so you have to apply too much force to open the box. Please send an STL and ideally a step file that fixes this problem. This is for 3D printing with FDM printer. For an experienced designer this should be quite easy, I think. Looking forward for your offers. Thanks!
PCB design for a scale with a 4G module to send results to WebServer using HTTP Post. Circuit is intended to be powered from battery with a support of solar panel. MCU will STM32 and 4G GSM module will using SIM7000
...industrial product design, especially joystick controllers and driver units. - Experience in medical technology will be a valuable asset. - Knowledge in wired communication protocols like UART is essential for the job. the most important detail of the project as follow : A-the part we already done and proven its functionality : 1-the wheelchair are driven by dual DC motors and power with 24 volt battery. the dc motor and the mechanical part of the wheelchair already manufactured and tested. B- the part we need you to accomplished with industrial standers : 1- the complete schematic ,BCP and the manufacturing Gerber file . 2- the complete firmware code. information about the unit : 1-we had a joystick with driver that can help interesting candidate for reverse engineer. t...
I am in search of an astute grant writer to assist me in procuring funds needed to upgrade our police radios. The upgraded radios are expected to enhance officer safety. Main areas we aim to improve include: - Range capability - Audio quality - Battery life These upgrades will be used by 10-50 local police officers, thus ensuring their efficient communication and overall safety. Ideally, prior experience or understanding of law enforcement communication systems will be beneficial. We are committed to better serving our community, and this upgrade plays a pivotal role in achieving that. Your contribution would significantly impact the daily operations of our force, making you an integral part of community development.
...through App menu Before using the app kindly check if below 4 step app configuration is done well. 1. Check if you have latest version of app with you. If not download the latest version from Play store. 2. Check if all the required permission given to app like GPS, Camera, Files and photos. GPS permission should be in “always allow” mode 3. GPS location should be set on High accuracy 4. Disable battery optimization for this app....
...particularly knowledgeable about forest ecosystems. The project entails identifying native plants and vegetation in a forest setting. Key tasks: - Conduct fieldwork in forests to identify and document native plants and vegetation. - Analyze and catalog findings to aid in a conservation initiative. Whilst no particular plant groups were specified, the ideal candidate could identify a range of flora from towering trees to less noticeable understory species and beautiful wildflowers. Necessary skills: - Robust knowledge in plant biology, ecology, or a related field. - Prior experience or coursework related to field botany, specifically forest ecosystems. - Strong ability to identify a wide range of plant species. - Passionate about conservation. This is a wonderful opportunit...
Here is a brief description of my project. (Please note: I will not reply back to auto response messages. Also please post the actual price not a price just to get my attention.) My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a wat...
Matlab Simulation Battery Optimization Urgent Work
I am in need of an experienced PCB designer who can create a small PCB module with the following features: - ESP32 - SIM module - Gyro - Battery backup with charging port Ideal skills and experience for this job include: - Extensive experience with ESP32 and SIM modules - Proficiency in PCB design software - Knowledge of battery technologies suitable for motorbike use - Understanding of gyro and sensor interfacing - Ability to design a compact PCB (less than 5cm x 5cm) Please provide samples of your past PCB designs in your bid.
I need an expert in renewable energy and optimization in Matlab to help me with a specific project. The project focuses on the optimization of energy storage systems, with a specific focus on batteries. Key tasks include: - Utilizing Matlab to model and ...determine the most efficient storage configurations. - Analyzing and interpreting the results to provide practical and insightful recommendations for energy storage optimization. The ideal freelancer should have: - Proficiency in Matlab and experience in the field of renewable energy. - Proven experience in optimization, preferably with a focus on energy systems or similar. - Specific experience with battery energy storage systems would be highly beneficial. - Strong analytical skills to interpret results and provide actionable...
I am looking for assistance in optimizing battery performance through Matlab simulation. Due to the project specifics not being clarified, the professional should be comfortable and experienced in working with a range of battery types such as Lithium-ion, Lead-acid battery and Nickel-metal hydride batteries. Key points to consider for this project: Skills and Experience • Understanding and experience in working with various battery types • Proficiency in Matlab for creating simulations and testing • Strong analytical modeling skills Project Objectives • Provide research and suggestions on optimizing battery life, decreasing charging time and improving power output. • Develop a comprehensive Matlab model suit...
I am in need of a proficient technician capable of handling both on-site and off-site mechanical and electrical repairs, battery replacement, as well as part servicing for both motorized wheelchairs and electric scooters. Key Requirements: - Expertise in mechanical and electrical repairs - Experience in battery replacement and parts servicing - Flexibility for both on-site and off-site service - Proven track record with motorized wheelchairs and electric scooters. The ideal contractor will have extensive experience and a demonstrated track record in dealing with these types of equipment and can provide high-level expertise and service to keep them operational. Malaysians or Singaporeans may apply.
