...争取记账权，并获得相应的奖励，也可以将其看成是一个向记录着数字资产过往交易的账本中添加新交易的过程。这一过程属于资源密集型和困难型。 以比特币为例，在其系统中，每隔两周挖矿难度就会根据这期间开采出来的区块数量而进行调整，将出块时间维持在10分钟左右，以保证系统的平衡。而矿工想要争取到区块链的记账权，获得相应奖励，就需要不断提高自己的算力，也就是计算出正确哈希值的速度，这将消耗大量电力。 最初，每个用户都可以通过运行原始的比特币客户端，来使用CPU进行挖矿。然而，随着挖矿算力不断提升，CPU挖矿的时代已经成为过去式，随之而来的是ASIC矿机挖矿和大规模集群挖矿的时代。 当然，除了POW挖矿之外，以POS为共识机制的数字资产也同样需要挖矿。只是在 PoS机制中，增加货币供应的过程分为两个部分，交易所开发Q周顾问3II2325834一部分是根据用户持有货币的数量和时间派发利息；另一部分才是类似于POW的挖矿过程，它基于交易输入和其他一些固定数据计算哈希值，挖矿难度与交易输入的“币龄”成反比。 在POW挖矿的过程中，将消耗大量的能源，来进行哈希运算以保证工作量的公平；而POS挖矿则在一定程度上节省了能源，但其依然需要进行挖矿，在本质上并没有解决商业应用的痛点。 【Tel+86/电：I38-235I-5578】 【企鹅Q：3II-2325-834】 【地址：广东省深圳市龙华区民治大道展滔科技大厦A栋15楼 】 【】 交易所搭建,数字资产交易系统搭建，数字资产交易平台搭建，数字资产交易系统网站搭建，数字资产OTC交易平台搭建，数字资产抵押平台搭建,区块链场外OTC交易平台搭建,区块链技术运用搭建,多币种钱包搭建，数字资产场外C2C平台搭建，数字资产币币撮合交易网站搭建，币币撮合交易所搭建，企业内部直播聊...
... 2. RS485驱动 RS485需要1个方向控制脚，当向对应的UART发送接收数据时，方向脚能自动实现方向控制。 3. 蜂鸣器驱动 蜂鸣器驱动要求能设置PWM输出的频率，输出的时间，输出时间到了自动关闭PWM输出。 4. 薄膜按键驱动和USB键盘驱动 预留24个GPIO作为薄膜按键的输入，目前的驱动是作为GPIO口来读取的；最好也缴入LINUX的输入事件，按不同的按键发送不同的键值，从event0读取；外接USB键盘驱动最好也从event0读取。 5. 其他GPIO驱动 每个GPIO口都可以通过驱动设置输入/输出。 6. 触摸屏驱动和外接USB鼠标驱动 7. 触摸屏驱动和外接的鼠标驱动设备文件最好固定，例如触摸屏固定使用event2，USB鼠标固定使用event3。 ENGLISH Basic Requirements for Hardware Resources of T3 Core Board Basic Hardware Resources 1. Power Supply DC power input, 5V single power input, CPU can detect whether this power supply; Battery input, lithium battery power input; Real-time clock power supply, use button battery; 2 Display interface to support RGB, LVDS and MIPI interface, as only one interface can be used at the same time, so the three interface pins can be re...
我需要重建一个已有的网站 设计就可以了 小型企业网站 We are a POS system supplier for restaurant
...直接冻结该加密狗的使用权限，使其不能播放。 7、加密狗，不可以被复制，不可以被破解，并且要具备一定的后期内部软件升级空间，根据我们的需要往其中加入新功能，如果被破解，我们是不会通过最终审核的。 We are an offline education training institution. Currently, we need to prepare the teaching MP4 video recorded every day for the students to study at home. However, the videos should not be shared randomly and sold online by our students. Therefore, we decide to encrypt the videos through hardware encryption to prevent the spread of the videos. It is necessary to develop three parts including video encryption software, USB softdog, and encrypt video player. The specific requirements are as follows: 1, We need to encrypt videos every day with the encrpytion software. The students can obtain the encrypted videos through online or offline copy. 2, The students plug the...
制作一款虚拟币，名字：finercoin 简称fic区块时间：1分钟 难度调节：每区块 标准股息：1%/年 最小交易费：0.0001FIC 交易费支付给矿工 交易确认：10，成熟确认：500 最小股龄：8小时，数量无最大无限制 算法：scrypt 区块奖励：10000FIC，没有减半 最大数量：1000（该区块后，将不接受POW，只接受POS股息产生）
制作一款虚拟币，名字：finercoin 简称fic区块时间：1分钟 难度调节：每区块 标准股息：1%/年 最小交易费：0.0001FIC 交易费支付给矿工 交易确认：10，成熟确认：500 最小股龄：8小时，数量无最大无限制 算法：scrypt 区块奖励：10000FIC，没有减半 最大数量：1000（该区块后，将不接受POW，只接受POS股息产生）
We require an FMEA expert. Our focus is on electrical and mechanical hardware systems like circuit boards, power supply, control systems, and communication systems. Your role requires you to create a detailed questionnaire and out of it to create a comprehensive analysis document for managuing risks. The ideal candidate must posess: - Proven experience conducting multiple FMEA activities in the past 24 months (provide evidence) - Specialised knowledge on electrical/ mechanical hardware analysis - Proficiency in examining circuit boards, power supply units, and control systems Kindly note that those without proof of previous FMEA execution need not apply. We seek someone who can help us entirely avoid or reduce risk. Your proficiency in identifying, analysing, and mitigati...
I'm in need of a developer with established experience with the Verifone Sapphire or Ruby API for retail POS systems. You will craft a script, based on HTTP call, to fetch a Transaction Report. The report should include the following data: - Product details - Pricing information (Unit price, Total price, Discounts) If you possess a sound understanding of retail operations, specifically with the use of Verifone Sapphire or Ruby API, then you are the expert I seek. Proficiency in HTTP call script writing is also a must. Please be prepared to demonstrate prior similar projects.
I'm looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Qualifications: -must have Distortion Analyzer, frequency sweeps -be able to build a prototype board totally functional -Simulate Analog / Digital signals Regarding hardware Cflash Audio Player using AAC codec Full prototype hardware to be shipped to US Audio player will use CFast card via SATA (not USB) and play audio files using AAC codec DDDAC1794 circuit Dual Dedicated PCM clocks via TCXO 44.1 khz and 48 khz auto select MUSES IC attenuator Steel enclosure (pick something from China but big enough to support batteries) RCA output Remote
...e=drop_down_filters&ref_ctx_id=4e043a5efd914feca6c5c1422601e7c1&pckg_id=1&pos=28&filtered_price=0%2C10&context_type=auto&funnel=4e043a5efd914feca6c5c1422601e7c1&ref=gig_price_range%3A0%2C10&imp_id=8bd382e4-f26d-4cdc-a9f7-1fc9d2aaf857 second is this link: third is this link:
...e=drop_down_filters&ref_ctx_id=4e043a5efd914feca6c5c1422601e7c1&pckg_id=1&pos=28&filtered_price=0%2C10&context_type=auto&funnel=4e043a5efd914feca6c5c1422601e7c1&ref=gig_price_range%3A0%2C10&imp_id=8bd382e4-f26d-4cdc-a9f7-1fc9d2aaf857 second is this link: third is this link:
I'm looking for an experienced Python developer with knowledge in SAN switch health checks to write a script for automating my Cisco switch health checkup. The script will need to automate several tasks including: - Gathering output of overall switch health - Checking the conditions of each hardware status - send an automatic email via outlook I would like to see applicants demonstrate their experience in writing similar scripts, and especially in performing SAN switch health checks. Your familiarity with Python scripting and Cisco products will be vital for this project. Your application should reflect your past experience in the area. I am eager to see your detailed project proposals to assist in making an informed decision. Is this a task you can confidently deliver? Take ...
The goal of this project is using Vivado tools to enable a hardware implementation on an FPGA board. The key requirement from the FPGA board is high computational speed. Therefore, proficiency in Verilog language is preferred as I intend to implement the NTT algorithm. I am looking for a developer who is experienced with FPGA boards and Vivado tools. The chosen freelancer should also have the ability to maximize computing capabilities of the board for the said implementation.
I'm looking for a skilled designer to create photorealistic images of a hardware device for marketing and investor presentation purposes. Key Requirements: - The images should showcase the device's functionality and operation, while also highlighting its design and aesthetics. - The preferred style for the images is photorealistic, to provide a clear and tangible representation of the product. The ideal freelancer for this project should have: - Proven experience in creating photorealistic images for hardware devices. - A strong eye for design and aesthetics, capable of highlighting key features in a visually appealing way. - The ability to understand the technical aspects of the device and translate them into compelling visuals. The goal of this...
...comprehensive e-commerce platform that includes Android, iOS, and web versions, along with an admin panel, employee management system, and POS integration. The project aims to create a seamless shopping experience for our customers while providing efficient management tools for our team. Requirements: E-commerce Website: Develop a responsive and user-friendly website similar to with the following features: -Product catalog with categories and filters -Shopping cart and checkout process -User registration and login -Order tracking and management -Payment gateway integration (e.g., PayPal, Stripe) with emphasis on security -Responsive design compatible with various devices -High performance and fast loading times even under heavy traffic conditions -Android and iOS Applic...
I'm looking to create a highly-informative business website that is primarily designed to reach a wide audience - the general public. The main focus of the site will be showcasing research products and services. The...primarily designed to reach a wide audience - the general public. The main focus of the site will be showcasing research products and services. The ideal candidate for this job should be: - Highly skilled in website development - Experienced in creating content-heavy websites - Familiar with optimizing user experience for easy navigation - Have an understanding of the best practices for showcasing hardware and software Please include examples of similar work in your bid. Passion for disseminating knowledge to the public is a plus. example website :
This project entails the creation of two standalone Java classes which will focus on acquiring a 10-bit voltage signal, processing it, converting it into the frequency domain, and then plotting it as if done by a spectrum analyzer. During this stage, no hardware will be necessary as the signal can be emulated. • Programming Skills Required: Since the project requires the implementation of a couple of Java classes, a deep knowledge and experience in Java programming language is pivotal. Big points for those knowledgeable in signal processing and spectrum analysis. • Visual Representation: The spectrum analyzer will follow a specific visual representation. I have attached a photo which should serve as a guideline for the visual component of the signal. We will further di...
...architecture and designing integrated circuits. Especially ones who can simplify complex concepts. Your tasks include: - Sharing previous experience in hardware, specifically in integrated circuits - Providing detailed explanation about the architecture designed using RTL - Answering queries related to integrated circuit design using RTL The ideal freelancer should possess: - In-depth knowledge of RTL language - Strong understanding of integrated circuit design - Ability to translate technical jargon into simple language - Demonstrated experience in the hardware field Please, share examples of your previous work related to integrated circuit design using RTL when you apply for this job. We anticipate this collaboration will greatly enhance our team&...
I'm looking for an experienced Flutter developer to help me create a Point of Sale (POS) page compatible with various platforms such as web, iPad, Mobile, and Windows. Please be aware that there's currently no API in my existing source code. If you're unable to handle this task, I may consider hiring someone else. However, I'm interested in understanding your requirements before making a decision. Kindly note that my budget for this project is up to $120. If your pricing exceeds this limit, I kindly request you not to bid for the project. (300$ IF 1 WEEK TO FINISH THE PROJECT) ( Contact me for more details )
YOU NEED TO BE BASED IN VANCOUVER _ ITS ON ON-SITE TASK I am seeking assistance in setting up my printer and installing a hardware firewall at a physical location in downtown Vancouver. The task needs to be performed onsite by a reliable professional with demonstrable experience. Key elements of the project include: - Installing a printer (Laser, Inkjet or All-in-one Printer). I already have the necessary drivers and software. - Installing a hardware firewall for enhanced network security. The ideal freelancer for this job should have: - Proven experience in printer installation and setup. - A solid understanding of hardware firewall setup and configuration. - Good communication skills, as I may need clear explanations of how to maintain the installed systems. - On...
I'm in search of a skilled embedded systems engineer, with expertise in C/C++ and Python. The main focus of the project is to develop embedded software for control systems. Key Responsibilities: - Developing software for embedded systems, primarily aimed at control systems. - Writing efficient, maintainable and high-quality code in C/C++ and Python. - Collaborating with the hardware team to ensure software is well-integrated. Ideal Skills and Experience: - Proven experience as an embedded systems engineer, with a particular focus on control systems. - Proficiency in C/C++ and Python for embedded systems development. - Familiarity with real-time operating systems (RTOS) is a plus. If you're someone who thrives on complex challenges and has a strong background in developi...
Unicenta POS - Payment Module Integration with Linkly AND TYRO requirement add support for Linkly and Tyro payment. A link to our development portal can be found here: Access to Linkly and Tyro and Custom Unicenta POS source code will be provided. Linkly - Hospitality Integration Features - On Prermise - Core Payments Tyro - Hospitality Integration Features - Integrated Purchases - Integrated Receipts - Integrated Refunds - Integrated Split Payments - Integrated Surcharging
I am actively looking for an IT support specialist possessing expert level skills in Hardware troubleshooting, software installation, and network configuration. They must have distinct expertise in handling Windows operating system. The duties and skills required include: - Troubleshooting hardware devices and tools, - Installing different software programs, - Configuring and maintaining network set-ups, - Flair in Windows OS management and operations. Extensive prior experience and a proven track record in these fields are indispensable. Proficient use of technical tools and adept problem-solving abilities will separate you from the rest. An expert level professional should be able to accurately diagnose issues and resolve them promptly.
As an AMD GPU owner, I'm facing severe problems with my PC not booting correctly. Troublingly, my computer is persistently crashing and there is no...checking GPU seating as initial troubleshooting steps, but these have unfortunately failed to rectify the issue. The job will involve pinpointing the root cause of these issues and implementing a solution that will let my PC boot properly. Freelancers interested in this job should ideally have: - Proficiency in troubleshooting AMD GPUs. - Knowledge on different PC hardware components. - Experience in diagnosing and resolving hardware boot issues. - A good understanding of driver installation and configuration. The objective here is not just to fix the problem, but to ensure a better and consistent performance from my...
Search engines need to be implemented at 3 cpts, these results must be loaded via Ajax on the same page, and with pagination. 2 of the forms have nested fields, that is, one option is chosen from a list and the other drop-down menu is filled automatically. I send screenshots in the document
As a sales agent urgently needed to represent our Builder Hardware products. You'll be selling a range of builder hardware items, including: - Door handles and knobs - Cabinet hardware - Bathroom fixtures Your primary responsibilities will include: - Generating leads - Working on closing deals Ideal candidates for this role should have: - Experience in hardware or related sales - Excellent communication and negotiation skills - Proven track record in generating leads and closing deals If you're an independent, self-driven sales professional with a knack for the hardware industry, we'd love to hear from you. Please apply with your resume and a brief summary of your relevant experience.
...refix . "CONNECTION RESET"); break; } else { $line = trim($line); } $pos = strpos($line, "</root>"); if ($pos !== false) { $this->logger->warning($this->logPrefix . "POS FINISH"); $startRoot = strpos($buffer, "<?xml version"); if ($startRoot === false) { $startRoot = 0; } $buffer .= substr($line, $startRoot, $pos + strlen("</root>")); $buffer2 .= substr($line, $pos + strlen("</root>")); ...
...Requirements: - The product should be compatible with medical equipment in a way that it can seamlessly drive a 24V wheelchair. - The joystick controller and the driver unit should be a complete, integrated system. Communication Interface: - I prefer a programmable microcontroller and driver unit that can communicate with UART communication protocol Ideal Skills: - Proficiency in industrial product design, especially joystick controllers and driver units. - Experience in medical technology will be a valuable asset. - Knowledge in wired communication protocols like UART is essential for the job. the most important detail of the project as follow : A-the part we already done and proven its functionality : 1-the wheelchair are driven by dual DC motors and power with 24 vol...
I am seeking a highly skilled Embedded Engineer specializing in creating LCD drivers. Key Functionalities: - LCD DRIVER INTERNAL SETTINGS The LCD screen size will be below 3 inches. I require the work to be precise, efficient, and reliable. Ideal Skills: - Extensive experience in embedded engineering - Proven knowledge in LCD Driver development - Good understanding of hardware specifications and power optimization - Previous experience in working on small size LCD displays would be an added advantage. Please bid only if you meet the above mentioned requirements. Looking forward to your proposals.
I'm in need of developing a competent water temperature reader using the XIAO ESP32C6 chip that should report real-time data to the backend over the MQTT protocol every hour. The main purpose is to continuously monitor the water temperature fluctuations. Preferred skills include: - Comprehensive understanding of MQTT protocol - Experience in coding and hardware setup for XIAO ESP32C6 - Proficiency in dealing with real-time data The job entails: - Setting up the XIAO ESP32C6 for water temperature reading - Programming the chip to send data to the backend over MQTT - Ensuring the data reports back every hour - Deliver a stable and reliable solution ( Preferably ESP-IDF) This project's success will involve a reliable water temperature reporting system with accurate, ...
More details: We are making some changes to this dashboard to...We operate a LPG gas agency, where customers exchange their empty cylinders for filled ones. However, sometimes we give out filled cylinders before receiving the empty ones back, resulting in two separate inventories: one for filled cylinders from our dealer, and another for empty cylinders returned by customers. To streamline this process, I propose adding a tab or checkbox in our Point of Sale (POS) system when selling the product, prompting the staff to confirm whether the empty cylinder has been received. If yes, it should update the Empty Cylinder stock; if no, it should not. Database management, Creating Two New database and a button in a dashboard., Need someone Who understand complex Backend Architecture in ph...
I'm in need of someone who can skillfully tweak my OKI C711 laser printer for roll-to-roll printing. Now max lenght print is optional 1,3m paper, we want up to 150meters, print repeatable images. I don´t know if it´s firmware/software, new hardware or both. to make it print on continuos media from multitpurpose tray. Who can help with this task please respond me!
Ho la necessità di integrare lo scambio importo tra alcuni gestionali e i POS tramite lo scambio importo. Servirebbe sviluppare un modulo in java per dare continuità ai progetti in essere. Il protocollo di comunicazione deve essere il protocollo 17 o il 39. I gestionali sono installati su pc windows e i pos sono collegati su rete lan. Chiederei di essere contattato solo da persone che lo hanno già fatto.
I require an intricate hardware developer with technical mastery to custom design an isolated encoder signal splitter board that's compatible with Arduino micro-controller, specifically ATmega2560. Key Features: 1. Voltage Isolation: The board must feature voltage isolation to ensure safe transmissions. 2. Compatibility: It must be fully interoperable with Arduino libraries which serves as a platform for expansion and experimentation. 3. Signal Amplification: the board should not draw more current than pull-up resistors for incremental encoders connection. If required, a signal amplification needs to be implemented. Standard signal voltage is 5V DC. Main Purpose: 1. Noise Reduction: It should provide clear communication by suppressing ambient noise in the signal. The...
I am in need of a proficient blockchain developer to create a Proof Of Stake system aimed at increasing transaction security. Integrating this system with Cosmos SDK is a key component of the project. The system requires the functionalities of staking rewards, a governance mechanism and slashing conditions. The idea...this system with Cosmos SDK is a key component of the project. The system requires the functionalities of staking rewards, a governance mechanism and slashing conditions. The ideal freelancer should have vast knowledge and experience with Cosmos SDK and the understanding of Proof Of Stake consensus rules. Proficiency in Golang or Rust is also a plus. These skills will facilitate the creation of a POS system that increases transaction security and offers differentiating...
As someone requiring expert Python knowledge, I am looking to find a coder who can aid me in creating a precise Python script that will effectively in... The captured signatures should be saved in a format that's optimal for database storage and for use in official forms. The preferred database management system for storing these signatures is SQLite3. The ideal freelancer for this role should have: - Extensive experience in Python programming. - Developed skill with hardware integration (preferably with Topaz products). - Proficiency in working with SQLite3 database management system. Your previous work with similar projects will greatly contribute to completing this project on time and with maximum efficiency.
...skilled IT Support Specialist to join my team on a part-time basis. Key Responsibilities: - Providing technical assistance and support to my organization's users - Troubleshooting and resolving hardware, software, and network issues - Setting up, managing, and maintaining our IT systems - Ensuring our systems and data are secure - Assisting with IT-related projects and upgrades - Offering training and technical guidance to users Ideal Skills and Experience: - Proven experience as an IT Support Specialist or similar role - Excellent knowledge of technical management, information analysis, and computer hardware/software systems - Strong problem-solving skills and ability to communicate technical information effectively - Familiarity with various operating systems and ...
Adjust an open source project so it works on ARM. I am looking for an experienced C programmer who can modify some C software (open source, on github - ) to make it compile for Raspberry Pi. The modifications needed include: 1. Updating Library Dependencies: Your task will include updating necessary library dependencies. 2. Adjust Hardware-Specific Code: Some parts of the code will need to be adjusted in order to work with Raspberry Pi's /ARM. 3. Fix Compatibility Issues: Tune up the code to address any compatibility issues that might arise during the Raspberry Pi compilation. A successful application should showcase your previous experience especially in handling similar projects. Evidence of past work will be highly regarded but is not a necessity
I'm looking for a professional to review my embedded C++ source code. The review should encompass the following: - Identification of any potential issues which could result in undesired behaviour - Identify any obvious errors in logical design or use of pointers, arrays etc Lint has already been run on the software - I do not want to see the output of lint! This code has been tested on hardware and performs ok. It controls motors, reads switches, encoders and ADC's, and drives eeprom and digipots. I need a final check to capture any errors or issues that may not be known. I do NOT want any style or general commenting recommendations - the review is ONLY TO IDENTIFY serious issues. I do not want speedup suggestions. This is close to production so any changes *ne...
I'm in need of an experienced .Net developer, with solid skills in MSSQL and C#, who can effectively handle front-end development tasks in my POS terminal project. Your primary tasks will be: - Implement business logic based on defined user stories. - Develop the user interface of the POS terminal using C# and associated .NET technologies. - Integrate the POS terminal with MSSQL database for data storage and management Ideal skills and experience: - Proficiency in .Net, MSSQL, and C#. - Previous experience in front-end development. This role requires both technical expertise and keen attention to detail. I am looking forward to your innovative solutions to meet our project requirements.
I am seeking a seasoned Qlik Sense developer to overhaul an existing application designed to analyze sales trends and patterns. The application heavily utilizes product sales data sourced from a Restaurant Point of Sale (POS) system. The ideal candidate will have a robust understanding of sales data models and experience in creating insightful, interactive dashboards on Qlik Sense. Objectives: Redevelop and enhance the existing Qlik Sense application to provide a more intuitive and interactive user experience. Incorporate advanced analytical features to uncover deeper insights into sales data, with a focus on comparative temporal sales analysis. Key Features Required: Interactive Dashboards: Develop dashboards that allow real-time interaction with data. Ensure the dashboards are...
I'm looking for a professional who can help me encrypt the information on an SD card securely. The purpose of this encryption is to ensure that i...should be accessible automatically on boot, without requiring additional steps like entering a password or using a physical key. - Data Sensitivity: The data to be stored on the SD card is highly sensitive, hence the need for robust encryption. The perfect candidate for this project should be highly skilled and experienced in: - Raspberry Pi projects - Data encryption techniques - Software and hardware integration - Linux and related operating systems Applicants for this project should also have a strong background in securing sensitive data and be able to demonstrate experience in carrying out similar projects. I look forward to ...
I'm looking for an expert in Raspberry Pi programming, ideally with experience in IR code programming. I would like ...also needs to capture these codes in the first instance) My setup will be a raspbery PI with the 7" touch screen PI display. I need a front end where I can present countdown timers, once the timer hits zero I need to send an IR signal. If the timer isn't stopped after countdown 1 minute later I need to send two more IR signals. Along with the PI and Screen I will need you to tell me what other hardware I need to purchase to capture and send these IR signals. Their will be only 5 signals in total to capture and these will not change during program operation Key Skills: - Raspberry Pi programming - Experience with IR codes - Flexibility to adapt ...
I'm in need of an experienced freelancer who can help in consolidating data from various applications and hardware sources on Raspberry Pis. The collected data is to be transferred between devices and to AWS. Here's an overview of what the project entails: - Data Consolidation: You will be tasked with gathering data from different sources within the app and hardware on Raspberry Pis. - Duplicate Handling: Duplicates in the data set should be automatically identified and deleted before the upload process. - Data Transfer: The consolidated data is to be sent between the Raspberry Pis and also to the AWS platform. - Post-Upload Data Management: After the data is uploaded, you will need to ensure that the data is deleted from the original source. - Dashboard Developm...
...limited internet access. This is essential for our project as it ensures that the devices can remain updated despite the lack of connectivity. - The system should be able to initiate the update process automatically. This means it should be able to detect nearby devices and share the necessary updates without requiring manual intervention. Ideal Skills and Experience: - Proficiency in Raspberry Pi hardware and software, particularly in working with Raspbian and understanding its update process. - Strong experience with AWS Greengrass and IoT services. - Previous experience in developing systems that facilitate offline data sharing or update distribution. - Adept at creating automated processes, specifically those involving device detection and interaction. If you're confid...
We require an FMEA expert. Our focus is on electrical and mechanical hardware systems like circuit boards, power supply, control systems, and communication systems. Your role requires you to create a detailed questionnaire and out of it to create a comprehensive analysis document for managuing risks. The ideal candidate must posess: - Proven experience conducting multiple FMEA activities in the past 24 months (provide evidence) - Specialised knowledge on electrical/ mechanical hardware analysis - Proficiency in examining circuit boards, power supply units, and control systems Kindly note that those without proof of previous FMEA execution need not apply. We seek someone who can help us entirely avoid or reduce risk. Your proficiency in identifying, analysing, and mitigati...
...undertaking a project to sell mobile phones to FoodPanda merchants via a 24-month subscription plan. I am using Zoho CRM Contacts module to capture all merchant information, including payments and delivery details. For most of the integrations with other common apps I am using Zoho Flow. As part of the payments, I am using Curlec by Razorpay (Curlec) to collect once off payment (for full upfront for hardware) as well as recurring payments (monthly data connectivity) via direct debit. Curlec obviously is not in the list of supported apps in Zoho Flow but they do have APIs. I want to be able to: 1) Push information to Curlec's direct debit authorization form (so the merchants don't have to key in the details again) such as merchant name, bank name, bank number, etc. 2) P...
...IOS (Ipad). En estos videos se puede ver el funcionamiento de la app actual: La app tiene un funcionamiento básico, Actualmente solo dispone de una pantalla dividida en 6 zonas. En cada una de ellas el usuario puede cargar una foto y/o sonido desde su dispositivo. Esta app conecta por bluetooth BLE con un hardware basado en el controlador ESP32 Por favor, solo coticen profesionales con experiencia contrastable en este campo y queremos claridad sobre lo que incluye su oferta y lo que no. Buscamos empresa con la que hacer una colaboración a largo plazo. Solo atendemos ofertas de profesionales que hablen español....
