任务： 1、集成Arduino，实现正常的初始化、连接Arduino硬件，并且支持向Arduino上传代码； 2、UI调整； 以上第1步已经完成集成Arduino部分，初始化、连接存在BUG，需修复，上传代码功能待实现。
...触摸屏驱动和外接USB鼠标驱动 7. 触摸屏驱动和外接的鼠标驱动设备文件最好固定，例如触摸屏固定使用event2，USB鼠标固定使用event3。 ENGLISH Basic Requirements for Hardware Resources of T3 Core Board Basic Hardware Resources 1. Power Supply DC power input, 5V single power input, CPU can detect whether this power supply; Battery input, lithium battery power input; Real-time clock power supply, use button battery; 2 Display interface to support RGB, LVDS and MIPI interface, as only one interface can be used at the same time, so the three interface pins can be reused; 3. Touch screen interface resistive screen interface, the use of ADS7846 or compatible chip, using the SPI interface; Capacitive screen interface, the use of IIC interface; 4. SD card interface CPU to reserve SD / TF card interface pins; 5. Network interface ...
我有进行中的、与之前的项目相关的工作parsing jsonarray using Arduino mega with esp8266-12 '
主要是想仿真一个激光测距的，暂时可以不考虑激光传感器，只需要模拟出计算时间差然后乘以光速，最后显示在LCD显示器上。自己已经做了一部分，proteus图已经画好，程序但是有点问题，求帮忙，有偿。
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
...display sensor data and other information from the ESP32 in real time. This is crucial for monitoring and making informed decisions. - **Graphical User Interface**: A clean, user-friendly interface is necessary for easy operation. Think about intuitive design and clear displays. - **Bluetooth Connectivity**: The app must be able to connect seamlessly to the ESP32 via Bluetooth. Reliable connectivity is a must. Interactions: - **Button presses**: The app will have buttons for the user to send commands to the ESP32. These should be responsive and intuitive. - **Text commands**: The user should also have the ability to input text commands. Think about a text box or prompt for this. - **Slider controls**: Some controls should be in the form of sliders. ...
...applications. Ideal Skills and Experience: Proficient in Windows application development. Expert in low-level programming, specifically in system-level assembly language. Knowledgeable in gaming input emulation and keyboard input simulation. Experience in backend applications is beneficial. Project Specifics: The emulator must not breach game firewall securities or require unauthorized system modifications such as disabling driver signature enforcement. It should operate successfully in the game, similar to devices like Arduino Leonardo or ESP32. The goal is to simulate pressing the Z1 keys solely through software, without external devices. Activation should be tied to the Caps Lock LED status—active when on, and inactive when off. Solutions utilizing...
You must to be at least 16 years old and live in Latin America or Eastern Europe. ✻ NO EXPERIENCE REQUIRED ✻ You do not need any experience whatsoever, but you must be clever and eager to learn. No. I am *not* being charitable; rather, I am being practical. ✻ PAYING YOU TO LEARN ✻ No. You aren't dreaming. I value intelligence and problem-solving ability over experience. I'd prefer to work with someone who is clever and learns quickly rather than someone experienced but is not very intelligent and/or does not solve problems scientifically. Would I hire an Isaac Newton or an Albert Einstein even if he had no programming experience? Of course I would. ✻ TESTS ✻ You must pass several difficult logic tests to work with me. The f...
I'm seeking a skilled PCB circuit designer to create a digital circuit f. The primary function of the circuit is PWM Motor Speed Control Key requirements: Input supply volta...designer to create a digital circuit f. The primary function of the circuit is PWM Motor Speed Control Key requirements: Input supply voltage: DC 2.5V-25V The maximum output power: 350W The maximum continuous output current :15A The overload and short circuit protecting current is 25A PWM frequency: 25-30kHz Duty Cycle adjustable: 0-100% The operation environment temperature:-20℃-40℃ Ideal freelancer would have: - Proven experience in digital PCB circuit design - Strong knowledge of signal amplification principles - Familiarity with radio technology and its requirements - Ability t...
Seeking a skilled graphic designer to create a visually compelling and modern logo for my business, Con Air Handyman Services. Below are a few specific requirements: - The design must incorporate the color blue, along with some silver. - Though I specialize in HVAC and home maintenance, I want the logo to be more focused on the HVAC aspect. - Ideally, the logo will include a temperature icon – something that clearly connects to heating or cooling. - As I've chosen a modern style, I'm interested in something sleek, simple and easily recognizable. - I also perform odd jobs and honey do lists Those experienced in logo design, particularly for service-industry businesses, would be an asset to this project.
...power electronics control system. The project involves using an Arduino DUE and the IMC101T T038 motor controller. The software should control and regulate both the grid side and machine side using Space Vector PWM (SVPWM). Communication between the Arduino and other components will be handled via serial communication. Additionally, the system should include a quadrant display using 4 LEDs to indicate whether it is operating in motor or generator mode. All datasheets and circuit diagrams will be provided. Key Responsibilities: Control and Regulation: Implement SVPWM on both grid and machine sides. Grid-side control: Adjustable power factor (cos(φ)), current, and power. Machine-side control: Adjustable fi...
...programmer to create a sensor-data generator for the website www.voeazul.com.br. The objective is to send a POST request to the site with valid sensor-data in order to obtain a particular cookie (_abck) for data analysis purposes. The sensor data to be simulated includes mouse movements, keyboard interactions, and browser interactions. Key Requirements: - Create a sensor-data generator in Java or python3 - The generator should simulate mouse movements, keyboard interactions, and browser interactions - The sensor-data should be valid enough to trigger the generation of the _abck cookie upon sending a POST request to Ideal Skills and Experience: - Proficiency in Java/python3 programming - Experience in web scraping and...
...looking for an experienced Arduino and ESP32 LVGL programmer who is able to Build arduino code for a Waveshare ESP32 s3 Touch LCD 4.3 and recognize data from I2C ADS1115 interface a display grafically Display have to rappresent data in 4 different page changeable touching icons placed in down part of display In each page are displayed more rounded bar with % value received from 3 x ads1115 i2c connected Key Responsibilities: - Program the ESP32 to recognize and interpret the data from the I2C ADS1115 sensor module - Integrate a responsive touchscreen control and an LCD display on the Waveshare ESP32 s3 Touch LCD 4.3 - Ensure the system is user-friendly and able to display the sensor readings accurately - Implement...
I am interested in a market ready multifunctional flashligh. I believe LED Diodes would be best, but I need two colors - White and Red LEDs. If possible, the flashlight will need to be approx. 3" long, 1 3/4" wide and about 1 1/16 wide. Using 2 litium CR123a batteries. I am seeking the flashlight to be military grade "Durable". The mainlamp should be on a swivel. Is this enough information to consider a project like this? Please advise.
...seasoned freelancer to devise a Derby car timer using Arduino Uno. The expected outcome will be a two-lane track device, with the ability to dictate the start and end of races, as well as display grades systematically. Key Features Needed: - Start Line Servo: To exhibit a complete rotation signaling the race's commencement. - Finish Line Infrared Sensors: These will be strategically positioned to detect the end of the competition. - Two-Lane Implementation: The structure should accommodate a dual lane setup. - Display: 7-Segment LED HT16K33 Backpack above each lane to show timing results. - Winner Identification Feature: An 8x8 matrix screen for indicating 1st and 2nd place finishes. Ideal Skills and Qualifications: - Working knowledge of Ard...
Develop schematics, PCB and firmware for a compact NFC reader. The suggested RFID controller is PN7160. Microcontroller - STM32 0) Two boards - antenna and the main board. The antenna diameter is 15mm with a hole in the center 4-5mm. The main board is 14mm in width and length is 35mm or less. 1) The reader must read and write password-protected memory blocks in Mifare Classic cards. 2) The reader keeps the password for the RFID cards as a hard-coded constant. 3) The reader has an 4-byte reader ID stored in its EEPROM memory. 4) The RGB LED on the edge of the main board, whose location matches the hole in the antenna. RGB LEDs are connected to the PWM pins of the controller. 5) A waterproof (if possible) speaker must be on the opposite edge of the ...
...for an expert in PCB design and fabrication to create a custom controller for my shop. The primary objective of this task is automating some key processes, with a special emphasis on security. Below are the specifications for the PCB controller: • Automation of the security system: This project requires designing a custom PCB controller which will integrate with various elements of the security system for automation. • Incorporation of alarm systems: The controller should easily synchronize with alarm systems, enabling automated responses in case of triggered alerts. • Seamless integration with access control systems: I wish to automate the access system in my shop, hence the PCB controller must be compatible with modern digit...
...intermediate-level programmer with experience in Embedded C and 8051 Microcontroller. The project involves designing a system that takes input from 3 sensors and controls an actuator (motor). Key Requirements: - Design a system on 8051 Microcontroller - Program the system in Embedded C - 3 sensor inputs and motor output - Intermediate experience level - Assist in sourcing necessary components I have a strong preference for someone who has worked with 8051 Microcontroller and has experience with designing systems that integrates sensor inputs and actuator outputs. Your role will involve both programming and assisting in recommending and sourcing the necessary sensors and actuator for this projec...
...Display: The display needs to be integrated in front of a small lens, which will then be in front of an image sensor. The display will serve as the light source, allowing light to reflect off the sample. - Raspberry Pi Integration: The device should be able to stream footage through a Raspberry Pi. Ideal Skills and Experience: - Prior experience in designing and building similar handheld devices or microscopes. - Knowledge of integrating transparent displays and image sensors. - Proficiency in programming and working with Raspberry Pi would be a plus. - Understanding of scientific research needs and standards. The ideal candidate for this project should be able to assist with the full development cycle from conception ...
...engineer to assist with spec'ing an electrical system. The system design. -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that are alread...
...microcontrollers. I already have arduino Mega tested code which i need to convert into stm32 family Key Project Details: - Specific STM32 Model: The project will involve firmware development for a specific STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the specific STM32 model is needed to ensure optim...
I need to design a tracker control unit for the 137 MHz band antenna system of the ground station receiving weather information from the NOAA spacecraft on Arduino. The project must be modeled at https://projecthub.arduino.cc. Need your idea and help how to implement it.
I am in search of a skilled KNX engineer to design a comprehensive hom...solution for a 4 room apartment. Key Requirements: - The scope will involve creating an AutoCAD file, a wiring plan, and a 2D structure for the products in the architecture plan. - You must also provide a list of quantities. Specific Features & Functions: - The automation project should include lighting control and temperature control. Integration: - There is no need for voice control or mobile app integration. Scalability: - The system should be designed to be scalable for future upgrades or additions. Ideal Skills: - Proficiency in KNX engineering with a portfolio demonstrating similar projects. - Strong AutoCAD skills. - Ability to design for scalability and future-...
Type of work: Consultancy/ Some design work. Have to work with the existing team. I'm looking for an experienced engineer who specializes in rubber gasket design, particularly for plumbing applications. The ideal candidate will have: - In-depth knowledge of rubber gasket design - Experience working on gaskets with specific attributes advantageous for: - High temperature resistance - High pressure resistance Your role will be to assist with the design and potentially the testing phases, to ensure the created gasket meets these specific attributes. Please detail any relevant experience and projects in your proposal.
...in automating lighting, heating/cooling and integrating specific features for each area. Key Requirements: - Lighting Automation: I need the system to include dimming capabilities, color changing lights, and motion sensor lights. It should be able to adapt to different lighting needs and situations. - Heating/Cooling Automation: I have a smart thermostat and I would like it to be integrated into the system. The system should allow for optimal temperature control and adapt to my preferences. Ideal Skills: - Home Automation: Experience with setting up and integrating smart home features is a must. - Lighting Systems: Proficiency in configuring lighting systems with various functions. - HVAC Systems: Knowledge in wo...
We have diagrams for the cars. We want someone who can create a database of where we can find the analog fuel sensor wire under the dashboard. Project is for 1000 cars and can be long term.
I'm looking for an engineer who can help me write some code for an Arduino to help me with a hardware project to read accelerometer data / gyroscope data. I have a piece of construction equipment that is supposed to vibrate up and down, however, if a customer assembles some attachments to it incorrectly it will vibrate up and down and side to side which will damage the equipment. I want to be able to read the accelerometer data to determine my customer has placed the attachment correctly and if it's incorrect I want to display a message on an LCD screen saying "incorrect placement" or something to that regard. I need help getting the hardware to work, creating the code for the hardware as Phase 1. Phase 2 is to allow thi...
I'm in need of a skilled circuit board designer that can create the and design the Greber file for me, I need to send the files to the manufacturing compony. My project contains few components only. SAM D11C 14-pin chip, 3 LEDS, Battery holder, and a reset switch. The "j2" pads are for programming the chip, Gnd, power, and clock. The 2 antennas traces are connected to analog pins A2 and A4. LEDs are connected to digital pins 24,25,31. the reset button to RST pin of course. For the 4 programming pads. Gnd and Power goes to Gnd and VDD pins in the chip, For the clock, I'm not shire which pins. layout size : 10 cm by 5.398 cm
I'm looking to create a binding within Openhab for an Elmo alarm system. The binding needs to enable the following functionalities: - Remote arming and disarming of the alarm system. - Monitoring the status of individual sensors and zones. - Sending sensor states to OpenHAB items. I do have a similar project that was written in Python for Home Assistant which I can provide as reference and guidance. Ideal Skills: - Strong experience with Openhab binding. - Proficiency in Python programming. - Familiarity with the Elmo alarm system will be a plus.
To integrate my Elmo alarm system with openHAB through bi-directional binding, I need a developer with openHAB and Elmo experience. The binding should be developed for E-connect, Elmo's cloud integration model. The features I'm after are: - Arm/Disarm functionality - Real-time status updates - Alarm event notifications - Sensing and sending sensor status to openHAB items. Anytime there's an event, status change, or a sensor goes on/off, I need the binding to provide immediate updates. Your skills in openHAB binding, Java, and IoT integrations will be essential for this project. The same project is just written in python for homeassistant
You must to be at least 16 years old and live in Latin America or Eastern Europe. ✻ NO EXPERIENCE REQUIRED ✻ You do not need any experience whatsoever, but you must be clever and eager to learn. No. I am *not* being charitable. I am being practical. ✻ PAYING YOU TO LEARN ✻ No. You aren't dreaming. I value intelligence and problem-solving ability over experience. I'd prefer to work with someone who is clever and learns quickly rather than someone experienced but is not very intelligent and/or does not solve problems scientifically. Would I hire an Isaac Newton or an Albert Einstein even if he had no programming experience? Of course I would. ✻ TESTS ✻ You must pass several difficult logic tests to work with me. The first log...
Design of Digital filter algorithm/ code in C for ARM processor for processing real time raw sensor to removal of noise & unwanted signal Algorithm / code for Digital Filter low bandwidth Real time Sensor Signals 1. Analogue Raw data acquisition in real time at 1000 samples per second in 24 bit precision 2. Raw data signal bandwidth /frequencies restricted to less then 1000 hz by hardware RC anti aliasing filter to avoid aliasing 3. Following Digital in sequence to be applied to raw signal . a. low pass filter 0-170 hzs ( to remove high frequency random / white noise b. High pass filter 1 hz to 400 hz (to remove low frequency dur DC signal coupling ) c. Very steep(narrow band) notch filter at 50 hz / 60 hz to remove power line interference a & b can be com...
...combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sports technology would be a de...
...platforms is essential as the application needs to be compatible with iOS and Android devices, as well as Windows computers. Primary Features: - Timer scheduling - Remote control of ventilation systems - Monitoring parameters including temperature, humidity, twilight, and weather - Real-time notifications and alerts - Scheduling system actions - Support for multiple users simultaneously Given the sensitive nature of the data and operations, the application must be secure. Your work will involve implementing advanced encryption to safeguard our communications and data. The ideal candidate for this project should be proficient in mobile and desktop application development, with a deep understanding of systems' programm...
I'm looking for an expert in Fast Fourier Transformation and/or Wavelet Analysis to transform temperature readings into a frequency/bpm output. This project is intended for a research project I am undertaking. I am looking to see if FFT/Wavelets are able to produce acurate bpm readings so there is not definitive method to follow which is why I require your help/ Key requirements include: - Utilizing Fast Fourier Transformation and/or Wavelet Analysis to transform the raw temperature data. (Data is in the form of multiple .csv files with temperature readings and time stamps). Ideal skills for this project include: - Proficiency in Fast Fourier Transformation and Wavelet Analysis. - Strong command of R programming language for ...
...in the development of a Wireless Sensor Network (WSN) simulation . The main focuses of this project include performance evaluation, energy consumption analysis, and routing protocol comparison. Key Requirements: - Previous experience in WSN network simulation - Able to develop a proprietary MAC protocol - Proficiency in relevant programming languages and software such as NS2/NS3, MATLAB, or OMNeT++ - Strong understanding of WSN system design Your primary role will be to help me create a comprehensive simulation that accurately represents a WSN network, as well as develop and test a proprietary Medium Access Control (MAC) protocol. This will require a keen eye for detail, a solid understanding of network architecture, and a strong background in progra...
I require a bridge software that seamlessly integrates native device drivers from Android (Java/Kotlin) and iOS (Objective-C/Swift) into my existing ReactNative application. Key Requirements: - I need the software to enable efficient and secure access to device sensor data. - The bridge should be able to handle and manage background services effectively. Skills/Experience: - Strong background in software development, specifically on Android and iOS platforms. - Proficiency in Java/Kotlin, Objective-C/Swift and ReactNative. - Prior experience in building bridge software is highly desirable. - Ability to deliver quality results under a tight timeframe is essential. Drivers: IoT SDK for BeaconSET+: Password: minewtech Documents:
...seeking a professional with experience in Battery Management Systems (BMS) to design and develop a LiFePO4 BMS. The key requirements and features include: - BMS should support 8S and 4S configurations - Maximum amperage capacity of 100A - The ability to alter the BMS ampere capacity by adding or removing MOSFETs or any other relevant hardware as required - The BMS should include essential safety features such as: * Temperature monitoring * Short circuit protection * Cell balancing * Reverse polarity protection - The system should allow for charging and discharging through the same port I need this project to be completed within a month. Ideal skills and experience for this job include: - In-depth knowledge and experie...
I need assistance programming an Arduino Opta PLC for remote monitoring. - The device must: - Monitor all 8 voltage inputs. - Provide access to monitored data through a web interface. Including Bluetooth capabilities and Wifi. Needs to send emails to customers or notifications to my apps. Ideal Skills: - Proficient in Arduino programming - Experience with PLC programming - Knowledge about remote monitoring and control systems.
...enable voice control for lighting, temperature control, and security systems in my home. Key Responsibilities: - Develop and implement Alexa skills for home automation. - Ensure the skills are user-friendly and efficient in controlling the devices. Key Features: - On/Off Control: I need the lights, temperature control, and security system to be controllable via simple voice commands to Alexa. - Dimming Control: It would be great if the skills also allow for dimming the lights. - Scheduled Control: In addition to immediate commands, the ability to schedule actions is important. Ideal Skills and Experience: - Proven experience in developing Alexa skills, preferably in the home automation domain. - Understanding of IoT devices and...
I'm in need of a talented data scientist with a strong background in natural language processing and deep learning. The goal of this project is to develop an efficient and accurate ML model that will estimate the temperature of the Electric Motor dataset from Kaggle. Key requirements include: - Utilizing natural language processing techniques to analyze the time series data provided - Employing deep learning methodologies to ensure the model is robust and performs well - Ensuring the model is able to accurately estimate temperature from the Electric Motor dataset Your expertise in natural language processing, deep learning, and time series data analysis will be crucial for the project's success. Please only apply if you h...
...developer with a knack for crafting groundbreaking applications, focusing on a LiDAR scanning app capable of meticulous measurements of buildings, walls, and various objects. This app is not just about scanning; it’s about integrating advanced video recording while ensuring every spoken word is captured and transcribed in real-time, crafting a multi-faceted tool that marries visual precision with auditory clarity. The core of this project revolves around leveraging LiDAR technology, a cutting-edge tool that uses light detection and ranging to produce precise three-dimensional information about the surrounding environment. The developer will harness this technology to create an application that not only maps out spaces with pinpoint accura...
...combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sports technology would be a de...
I'm in need of an experienced architect who can help me design and visualize an animal farm primarily for chickens. Key Requirements: - Designing the architectural blueprints for the farm - Creating 2D, 3D visual representations of the farm - Planning the layout and dimensions of the chicken housing - Creating differnt rooms for different needs Features Needed for Chicken Housing: - Automated Feeding Systems - Temperature Control - Waste Management Systems I am open to suggestions and ideas for creating an efficient and animal-friendly environment for the chickens. Ideal Skills: - Architectural Design - 3D Modelling and Visualization - Animal Farm Design Experience Please provide examples of your previous work related to this project.
I'm in need of an experienced architect who can help me design and visualize an animal farm primarily for chickens. Key Requirements: - Designing the architectural blueprints for the farm - Creating 2D, 3D visual representations of the farm - Planning the layout and dimensions of the chicken housing - Creating differnt rooms for different needs Features Needed for Chicken Housing: - Automated Feeding Systems - Temperature Control - Waste Management Systems I am open to suggestions and ideas for creating an efficient and animal-friendly environment for the chickens. Ideal Skills: - Architectural Design - 3D Modelling and Visualization - Animal Farm Design Experience Please provide examples of your previous work related to this project.
...designer to create a modern and sleek user interface for an ESP32/Arduino and a sensor based project. The design should feature gauges and other components in various colours completing a modern and clean aesthetic design. The UI should include the following components: - Sensor Readings: The main screen should present readings from various sensors in a clear and easy-to-understand format. - Real-time Graphs: The design should incorporate real-time graphs that display data trends in an engaging and user-friendly manner. - Control Buttons: The UI must also include control buttons for user interaction. Ideal candidates should have: - Proven experience in UI design for IoT projects, particularly for ESP32/Arduino....
...Please gather product information on vehicles equipped with the technology explained in the 【2. Technology to be Searched】 section below. ※Note Do not gather information only from the information listed in 【1. Background】【3. Reference Information】 (【1】【3】 are reference information) 【1. Background】 This technology is about notifying the driver of the host vehicle about the presence of other vehicles. Past technology notifies the driver when the host vehicle is stopped, the right turn indicator is activated, and the time it takes for other vehicles to reach the expected right turn trajectory of the host vehicle is shorter than a certain time. However, ideally, notifications should start before the driver starts the right turn operation, and unnecessary notifications ...
...product information on vehicles equipped with the technology described in the “2. Desired Technology” section below. *Note Do not collect information based solely on the information listed in the “1. Background” and “3. Reference Information” sections (Sections 1 and 3 are for reference only) 【1. Background】 This is a technology related to charging the on-board storage device with power supplied from an external vehicle charging facility. In recent years, the development of electric vehicles capable of “plug-in charging” using a charging cable for power supply has been progressing, and there is a problem of heat loss at the charging facility, charging cable, and vehicle charging inlet. Therefore, ...
