任务： 1、集成Arduino，实现正常的初始化、连接Arduino硬件，并且支持向Arduino上传代码； 2、UI调整； 以上第1步已经完成集成Arduino部分，初始化、连接存在BUG，需修复，上传代码功能待实现。
我有进行中的、与之前的项目相关的工作parsing jsonarray using Arduino mega with esp8266-12 '
主要是想仿真一个激光测距的，暂时可以不考虑激光传感器，只需要模拟出计算时间差然后乘以光速，最后显示在LCD显示器上。自己已经做了一部分，proteus图已经画好，程序但是有点问题，求帮忙，有偿。
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
I did a Android app with MIT appinventor that i need to convert to iOs. The app has only 3 screen (the 1st with logo, second is the programm, and the last is the user manual), just need to communicate with the Bluetooth (a BLE 4.0) to send a simple string to a Arduino board. The app is really easy, i attached a screenshot of the main page. - The Bluetooth button (when click) will show a list of all available BLE. - The red "Non connecte" will go in green and "Connecte" when connected, and when click will disconnect the Bluetooth. - The 1st ok button (at "Reset réglage d'usine") will send a string by bluetooth to put all value at factory. - The slider select a value between 0 and 100. - The button ok bellow the slider ("Envoyer le r&eacu...
I'm seeking a skilled Arduino developer for a basic level robotics project. The primary tasks for this role will include coding and troubleshooting hardware. Key requirements: - Skilled in writing Arduino code - Able to troubleshoot hardware issues - Experience in basic robotics projects The purpose of the project is to create a basic level robotics system using Arduino, which involves simple movements and operations. The ideal candidate will have a good understanding of robotics, and experience in designing circuits would be an advantage.
I require a specialist to implement a sensor data logging system using Arduino/ESP32. i Required candidate who have experties in aurdino / ESP32 and rotary encoder. Necessary Skills: - Comprehensive understanding of Arduino/ESP32 - Rotary encoder It's vital that the system be designed accurately to fulfill the need for reliable data storage. An understanding of data management and the capability to create systems for future data analysis is crucial. A background in similar projects would be greatly advantageous.
...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...
I have been developing a arduino type hmi using a nextion touch screen, arduino mega, arduino nano esp32 for wireless control and a waveshare esp32 touchscreen for the remote. I have written all the code but am needing help figuring out why the commands are not working as they should.
...similar to that of a Seiko S141. This is crucial for comfortable handling during sports activities. - The design must be compatible with micro boards, a battery, and an OLED display. I would like to use Arduino pro micro and a small 1.5" display Ideal Skills and Experience: - Proficiency in product design and CAD software to develop the case model. - Prior experience in designing sports equipment is highly preferred, to ensure the final product meets the specific requirements for this kind of usage. - Knowledge of materials to be used in manufacturing for both durability and comfort. - Familiarity with the technical aspects of integrating micro boards, batteries, and displays into a compact design. If you have expertise in these areas and can deliver ...
I am in need of a skilled Arduino programmer, with experience specifically in robotics programming for educational purposes. The project has an intermediate level of complexity, so a solid understanding and the ability to problem-solve and code efficiently will be crucial. Ideal Skills: - Arduino programming - Robotics programming - Educators and student-user centered design Given the nature of the end-users, it would be highly beneficial if the freelancer also has experience in creating user-friendly interfaces and can foresee potential challenges that educators or students may face. Your technical expertise will be expected to translate into an accessible and engaging project that fits the educational context.
I'm seeking an experienced Arduino developer with a strong background in SNMP integration to assist with my IoT project. While I haven't detailed the specific tasks for the Arduino sketch, I need someone who is able to create a comprehensive program that meets the needs of my project.
I am seeking talented freelancers to develop an Arduino UNO bluetooth car for my personal hobby project. It requires expertise in Arduino programming and physical assembly of the car kit. The specific features I want are: - Directional movement: The car should smoothly move forward, backward, left, and right via remote bluetooth controls. - Speed control: The speed of the car should be adjustable. The ideal size I'm seeking for the car is medium, neither too compact nor too large. Experience with remote control vehicles and Arduino, as well as understanding of bluetooth technology, will be a plus for this project. I am looking forward to your innovative design submissions and technical solutions.
I'm in need of an experienced programmer who is well-versed in Arduino code. This project demands a particular set of skills: * Proficient in Arduino coding with a focus on device communication. * Comprehensive understanding of stepper motors functionality and their interaction with Arduino. * Ability to program Arduino to communicate and effectively control two stepper motors. The delivered coding should achieve seamless communication between Arduino and the stepper motors. Please take note of the quantity of stepper motors to control - two in this instance. Qualified bidders will be well-experienced in Arduino and stepper motors, able to discuss technical requirements with clarity, and pride themselves in delivering accurate, reliable cod...
...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...
I'm looking for a skilled ...coordinates in a temperory queue and Send them every 5 Sec. 5. Along with GPS also send Speed information. // Push coordinates API contract Data Structure :- <TrackerId> : { coords: [ { loc: [<lat>,<long>], Speed: 14 }, ... ] } Result : 1. Steps to deploy code to A9G module 2. How to change GPS coordinates recording frequency Ideal Skills: - Arduino Developer - Understanding of developing custom GPS tracking solutions - Experienced with the Ai-Thinker A9G GPS/GPRS module - Strong understanding of real-time tracking and speed measurement technologies - Excellent problem-solving skills for effective communication method implementation. If you have the necessary skills and...
IOT is being used a lot these days to provide functions that were being done before manually. We are also embarking on the same journey and looking for a potential person who can help us with our proposed system. Thank you
...experience in developing multi-layered boards for prototyping purposes. We have an existing design that needs some simple changes. This should be a short/fast project. Key Requirements: - Experience with ESP32-S3 - The design should be optimized for a multi-layer board (two layer if possible) - The board will need to integrate microcontrollers, an ePaper display, and power management components - Experience in designing PCBs for prototyping required - Currently the design uses a TTL connection for uploading firmware Your tasks will include: - Understanding the project requirements and goals - Make necessary updates to design files - Assist software (firmware) team in loading/executing firmware (Arduino IDE) - Designing a multi-layer PCB layout that...
As a developer with experience in MKS DLC32 (Arduino code), I am looking for a solution to gain precise control over a 5-volt water pumps and a servo connected to an MKS dlc32 board. the code should be written in Arduino Ide as custom script. Key Features: - Controlling stepper motors (already have that) - Regulating a 5-volt water pump - Manipulating a servo The success of this project relies heavily on achieving precise control over the afore mentioned devices. Given the technical requirements for this job, it's beneficial if you have a relevant background and an understanding of how to efficiently work with MKS DlC32 board. Ideal Skills and Experience: - Extensive experience with Arduino IDE - Specific knowledge of MKS dlc32 boards - Proven ability in d...
I require an intricate hardware developer with technical mastery to custom design an isolated encoder signal splitter board that's compatible with Arduino micro-controller, specifically ATmega2560. Key Features: 1. Voltage Isolation: The board must feature voltage isolation to ensure safe transmissions. 2. Compatibility: It must be fully interoperable with Arduino libraries which serves as a platform for expansion and experimentation. 3. Signal Amplification: the board should not draw more current than pull-up resistors for incremental encoders connection. If required, a signal amplification needs to be implemented. Standard signal voltage is 5V DC. Main Purpose: 1. Noise Reduction: It should provide clear communication by suppressing ambient noise in the sign...
As the project owner, I require an Arduino Uno code, specifically designed to interact with a fingerprint reader for input, LCD and 14 relays for output. Key Requirements: - The code should identify 14 people's fingerprints (let's say 2 different fingerprints for each person), write the name of that person on the LCD and activate the corresponding relay for each person. - The associated relays will control a particular robotic device. - When an unrecognized fingerprint is scanned, the system should write on LCD "unrecognized fingerprint" without triggering any relay. Ideal Skills and Experience: - Proficiency with Arduino programming - Experience working with fingerprint readers - Knowledge of relay and robotic systems . Familiarity with sensor integr...
I have a project that requires setting up an 8 Channel Arduino Relay Module and programming it to operate using a basic 4 button hand controller. My Arduino board of choice is the Arduino Uno. For the hand controller, I need different functionalities: - Each button should be able to toggle a specific relay on and off. - Certain buttons should cycle through a sequence of relays. - Some buttons should have the ability to control a combination of relays. Importantly, only 1 relay should be controlled at a time. The ideal freelancer for this project should have a deep understanding of Arduino programming, particularly with Arduino Uno, and experience with relay modules and controller setup. Familiarity with creating flexible, customizable controls is a p...
Here is a brief description of my project. (Please note: I will not reply back to auto response messages. Also please post the actual price not a price just to get my attention.) My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof...
...individual to create an innovative IoT solution utilizing an Arduino board and camera module, along with UPC scanning software. This project involves developing a UPC scanner that can accurately read the UPC on a product. Upon scanning, the information of the scanned product such as date, time, UPC, product name and product retail should be transmitted and populated into a web application. Key Tasks: - Develop and integrate the UPC scanning software to be used with the camera attachment for the Arduino board. - Establish a Wi-Fi connection for the Arduino IoT UPC scanner to communicate with the web app. - Ensure accurate transmission and population of the scanned product information in the web application. Ideal Skills: - Proficient in Ardu...
I need an expert in Arduino programming to develop a code that connects to an OV7670 camera, recognizes specific patterns (like a person's head) and triggers an LED. Key Requirements: - Use an Arduino Uno or Nano to interface with an OV7670 camera and LED. - The code should have a pattern recognition feature - specifically, recognizing a person's head. - When the pattern is detected, the LED should light up to indicate an event has occurred. Additional Details: - The code should be able to differentiate a specific pattern (a person's head) from other objects or patterns that may be in the camera's view. - This is an intermediate level project, hence the recognition should be accurate enough to detect the specific object. Ideal Skills: - Proficiency in ...
Написати код для проекту розробка системи контролю мікроклімату на базі arduino leonardo (є також UNO) в середовищі Arduino IDE Макет буде у коробці у якій треба буде продемонструвати роботу. Треба щоб на екрані відображалась поточна температура та також можливість встановлювати температуру через джойстик. Треба щоб значення температури регулювалась через PID-регулятор (програмно) для того щоб пристрої охолодження та нагріву змінювали потужність плавно в залежності від поточної температи. Список датчиків та деталей: 1. Датчик вологості та температури DHT11 (Є також bme 280) 2. Датчик газу MQ2 3. LCD1602 з i2c 4. Джойстик для ардуіно 5. Вентилятор 5v або 12v - для охолодження повітря (такий який в ПК встановлюється) 6. Нагрівальний елемент – лампа накалювання (н...
Advise as to whether vs code or arduino ide would be more suitable Complete a project containing the various pages of code, organised and zipped, ready for unpacking and modification/use. //* comment heavily, briefly explaining the features as you go. Use caps lock for anything that requires editor attention or input. Intended for hardware devices: • Xiao Esp32-S3 Sense (I call 'sense') • a small bulb such as this: • ESP32-4848S040C_I_Y_3 (I call '484') • a small speaker, such as this: Each sense should be assigned the placeholder for 2 micro servos. So if a new sense is selected via the 484 at any time, it is assigned a light as well as 2 servos. No functionality is currently required of the servos but the coding should
I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM
I am in need of a professional who can efficiently handle an RS485 device that requires reconfiguration. The scope of...converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necessary. Please only bid if you are confident with this job, have relevant experience, and can deliver the projec...
...background in measurement systems particularly using load cells and load cell amps and basic platform development. The objective is to develop a project which measures loads within a range of 10-20kg , with data input to an Arduino microcontroller. The ability to configure an edge device to continuously stream data to a simple BI dashboard on a desktop is also required. The successful freelancer should have the following skills and experience: - An excellent understanding of load cells and how to operate and interpret readings from them. - Extensive experience using Arduino microcontrollers and able to proficiently program and troubleshoot them. - Knowledge on how to integrate an edge device with this setup, and the skills needed to stream data to a BI dashboard. -Should...
Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where it cam...
I'm in need of an ESP32 BLE application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific requirements of this project.
I'm in need of a skilled Arduino coder to create a custom code for me. My project primarily involves generating variable frequency range FSK sine wave output. Key Requirements: - Develop code specifically for Arduino R4 board + SD card module - Generate sine waves of different frequencies - Different frequencies - 10,000 different frequencies (integers) - eg: txt file (100,200,300,400,500.................n integers) Frequencies list are stored in a SD card CSV or txt format Arduino new R4 boards has built-in DAC for sine wave generation with ready made library as follows: Code for wave generation --->>> analogWave wave(DAC); int freq = 10; // in hertz, change accordingly void setup()...
I'm looking for a skilled and experienced electronic engineer who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your p...
I'm seeking an expert in LabView, Arduino programming, and their integration. The aim of the project is to create a system for industrial automation and prototyping that includes: - Real-time data monitoring - Designing a user-friendly interface - Automation and integration of microcontrollers You should ideally hold substantial experience in LabView development and Arduino programming. Your experience should encompass integrating these platforms and implementing the features mentioned above. Knowledge in integrating various sensors into this type of system and achieving real-time data monitoring will be crucial to this project. Any previous work with industrial automation and prototyping will certainly be beneficial.
I am looking for experie...curriculum should encompass three main areas: 1. Coding: Should cover various programming languages including Python, Java and foundational learning platforms like Scratch, as well as MIT App Inventor for app development. 2. Robotics: The curriculum should also touch on different robotics platforms - from Arduino, LEGO, VEX, Sphero to Raspberry Pi. 3. Media Arts: In addition, I want to integrate media arts, where students can learn graphic design, animation, videography, and web design and development. Ideal candidates should have extensive experience in pedagogy and skill development in these areas, and be able to create an engaging, age-appropriate curriculum for students across K-20. Willingness to incorporate cross-disciplin...
Buenos días. Estoy buscando una persona con conocimientos en Arduino, ESP32, etc. Hará falta que tenga tanto conocimientos de programación como para el montaje físico. El proyecto inicial consiste en encender una tira led RGB de 24V a través de un detector de movimiento (LD2410C) y mediante la programación realizada que cambie de color según si detecta o no movimiento. Según los conocimientos del empleado se aumentarán las tareas designadas. Tiempo estimado no más de 3h para la realización del diseño y planteamiento del proyecto.
I have an existing Arduino code which requires modification for converting my Bluetooth to BLE compatible for iOS applications. Your responsibility will be to: - Modify the existing Arduino code to make it BLE compatible - AS optional Create an iOS application with a control interface feature. The application should allow users to control and manage a customized smart lock model. Ideal Skills: - Expertise in Arduino code modification - Proven experience in developing BLE compatible software - Proficient in iOS application development, particularly in creating control interfaces - Familiarity with smart lock functionalities would be a bonus. Your services will be reviewed for potential system upgrading needs, hence, I'm interested in individuals who have a pr...
I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.
I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will be sent to the ...
I need a C++ programmer who can answer questions about my project Key Project Requirements: - Have prior experience in C++ programming for Arduino UNO - Familiarity with PixyMon camera - Proficiency in implementing line following functionality The project is urgent, and I need someone who can deliver a high-quality code within a short time frame. If you meet the above requirements, and you're confident in your ability to deliver quickly, please reach out.
I am seeking an Arduino programmer to help with a specific project. Key Responsibilities: - Writing code for controlling reed switches - Displaying data from the reed switches on an LCD Ideal Candidate: - Proficient in Arduino programming and sensor control - Experience in working with reed switches - Capable of interfacing with LCD displays This project requires a good understanding of sensor control, as well as being able to implement the desired display output. Understanding of the specific sensor, reed switches, is a plus. Please only bid if you have experience in these areas.
Here is a brief description of my project. My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof container and be able to be charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a...
I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.
...smart power monitor system I've developed using Arduino. This report will be accompanied by a PowerPoint presentation. The report should contain: - **Technical Details:** I have a basic structure in place, but I'm seeking a professional who can fill in any missing technical information. - **Benefits and Applications:** The report should showcase the potential benefits of this system and highlight possible real-world applications. - **Data Analysis and Insights:** It's important to have a detailed data analysis section, with insights drawn from the information collected by the system. I also need the report to include missing details such as: - **Hardware Components Used:** I'd like the freelancer to list all the hardware components like the Arduino U...
I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will be sent to the ...
I'm looking for a skilled Arduino programmer who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a button), remo...
I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a specialized p...
