任务： 1、集成Arduino，实现正常的初始化、连接Arduino硬件，并且支持向Arduino上传代码； 2、UI调整； 以上第1步已经完成集成Arduino部分，初始化、连接存在BUG，需修复，上传代码功能待实现。
我有进行中的、与之前的项目相关的工作parsing jsonarray using Arduino mega with esp8266-12 '
主要是想仿真一个激光测距的，暂时可以不考虑激光传感器，只需要模拟出计算时间差然后乘以光速，最后显示在LCD显示器上。自己已经做了一部分，proteus图已经画好，程序但是有点问题，求帮忙，有偿。
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
I'm looking to create a binding within Openhab for an Elmo alarm system. The binding needs to enable the following functionalities: - Remote arming and disarming of the alarm system. - Monitoring the status of individual sensors and zones. - Sending sensor states to OpenHAB items. I do have a similar project that was written in Python for Home Assistant which I can provide as reference and guidance. Ideal Skills: - Strong experience with Openhab binding. - Proficiency in Python programming. - Familiarity with the Elmo alarm system will be a plus.
To integrate my Elmo alarm system with openHAB through bi-directional binding, I need a developer with openHAB and Elmo experience. The binding should be developed for E-connect, Elmo's cloud integration model. The features I'm after are: - Arm/Disarm functionality - Real-time status updates - Alarm event notifications - Sensing and sending sensor status to openHAB items. Anytime there's an event, status change, or a sensor goes on/off, I need the binding to provide immediate updates. Your skills in openHAB binding, Java, and IoT integrations will be essential for this project. The same project is just written in python for homeassistant
...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...
Design of Digital filter algorithm/ code in C for ARM processor for processing real time raw sensor to removal of noise & unwanted signal Algorithm / code for Digital Filter low bandwidth Real time Sensor Signals 1. Analogue Raw data acquisition in real time at 1000 samples per second in 24 bit precision 2. Raw data signal bandwidth /frequencies restricted to less then 1000 hz by hardware RC anti aliasing filter to avoid aliasing 3. Following Digital in sequence to be applied to raw signal . a. low pass filter 0-170 hzs ( to remove high frequency random / white noise b. High pass filter 1 hz to 400 hz (to remove low frequency dur DC signal coupling ) c. Very steep(narrow band) notch filter at 50 hz / 60 hz to remove power line interference a & b can be com...
...hardware system for a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sp...
...for a tech-savvy professional who can create an application that allows for seamless remote control of ventilation systems. The ability to work across multiple platforms is essential as the application needs to be compatible with iOS and Android devices, as well as Windows computers. Primary Features: - Timer scheduling - Remote control of ventilation systems - Monitoring parameters including temperature, humidity, twilight, and weather - Real-time notifications and alerts - Scheduling system actions - Support for multiple users simultaneously Given the sensitive nature of the data and operations, the application must be secure. Your work will involve implementing advanced encryption to safeguard our communications and data. The ideal candidate for this project should be profi...
I'm looking for an expert in Fast Fourier Transformation and/or Wavelet Analysis to transform temperature readings into a frequency/bpm output. This project is intended for a research project I am undertaking. I am looking to see if FFT/Wavelets are able to produce acurate bpm readings so there is not definitive method to follow which is why I require your help/ Key requirements include: - Utilizing Fast Fourier Transformation and/or Wavelet Analysis to transform the raw temperature data. (Data is in the form of multiple .csv files with temperature readings and time stamps). Ideal skills for this project include: - Proficiency in Fast Fourier Transformation and Wavelet Analysis. - Strong command of R programming language for generating the output in R code. M...
I am in need of an experienced individual to assist in the development of a Wireless Sensor Network (WSN) simulation . The main focuses of this project include performance evaluation, energy consumption analysis, and routing protocol comparison. Key Requirements: - Previous experience in WSN network simulation - Able to develop a proprietary MAC protocol - Proficiency in relevant programming languages and software such as NS2/NS3, MATLAB, or OMNeT++ - Strong understanding of WSN system design Your primary role will be to help me create a comprehensive simulation that accurately represents a WSN network, as well as develop and test a proprietary Medium Access Control (MAC) protocol. This will require a keen eye for detail, a solid understanding of network architecture, and a strong...
I require a bridge software that seamlessly integrates native device drivers from Android (Java/Kotlin) and iOS (Objective-C/Swift) into my existing ReactNative application. Key Requirements: - I need the software to enable efficient and secure access to device sensor data. - The bridge should be able to handle and manage background services effectively. Skills/Experience: - Strong background in software development, specifically on Android and iOS platforms. - Proficiency in Java/Kotlin, Objective-C/Swift and ReactNative. - Prior experience in building bridge software is highly desirable. - Ability to deliver quality results under a tight timeframe is essential. Drivers: IoT SDK for BeaconSET+: Password: minewtech Documents:
...BMS ampere capacity by adding or removing MOSFETs or any other relevant hardware as required - The BMS should include essential safety features such as: * Temperature monitoring * Short circuit protection * Cell balancing * Reverse polarity protection - The system should allow for charging and discharging through the same port I need this project to be completed within a month. Ideal skills and experience for this job include: - In-depth knowledge and experience in BMS design, particularly with LiFePO4 batteries - Proficiency in creating flexible BMS systems with variable ampere capacity - Extensive experience with temperature monitoring, short circuit protection, cell balancing, and reverse polarity protection - Ability to deliver the project within the stipu...
I need assistance programming an Arduino Opta PLC for remote monitoring. - The device must: - Monitor all 8 voltage inputs. - Provide access to monitored data through a web interface. Including Bluetooth capabilities and Wifi. Needs to send emails to customers or notifications to my apps. Ideal Skills: - Proficient in Arduino programming - Experience with PLC programming - Knowledge about remote monitoring and control systems.
I'm looking for a skilled developer to create Alexa skills for home automation. The primary goal is to enable voice control for lighting, temperature control, and security systems in my home. Key Responsibilities: - Develop and implement Alexa skills for home automation. - Ensure the skills are user-friendly and efficient in controlling the devices. Key Features: - On/Off Control: I need the lights, temperature control, and security system to be controllable via simple voice commands to Alexa. - Dimming Control: It would be great if the skills also allow for dimming the lights. - Scheduled Control: In addition to immediate commands, the ability to schedule actions is important. Ideal Skills and Experience: - Proven experience in developing Alexa skills, preferably in...
I'm in need of a talented data scientist with a strong background in natural language processing and deep learning. The goal of this project is to develop an efficient and accurate ML model that will estimate the temperature of the Electric Motor dataset from Kaggle. Key requirements include: - Utilizing natural language processing techniques to analyze the time series data provided - Employing deep learning methodologies to ensure the model is robust and performs well - Ensuring the model is able to accurately estimate temperature from the Electric Motor dataset Your expertise in natural language processing, deep learning, and time series data analysis will be crucial for the project's success. Please only apply if you have a proven track record in these ...
...Simultaneous video recording is another critical facet of this application. The developer must integrate a robust video capturing feature that works in tandem with the LiDAR scanning process. This feature is not merely about recording visuals but is intricately tied to the app's core functionality, providing a live feed of the scanning process and capturing the real-world environment as the LiDAR sensor gathers data. This integration must be seamless, with the video and scanning data synchronized to offer a comprehensive view of the scanned area. Audio transcription adds another layer of complexity and utility to the app. As the app scans and records, it should also listen, capturing every word spoken during the process and transcribing it in real-time. This feature is cruc...
...hardware system for a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sp...
I'm in need of an experienced architect who can help me design and...experienced architect who can help me design and visualize an animal farm primarily for chickens. Key Requirements: - Designing the architectural blueprints for the farm - Creating 2D, 3D visual representations of the farm - Planning the layout and dimensions of the chicken housing - Creating differnt rooms for different needs Features Needed for Chicken Housing: - Automated Feeding Systems - Temperature Control - Waste Management Systems I am open to suggestions and ideas for creating an efficient and animal-friendly environment for the chickens. Ideal Skills: - Architectural Design - 3D Modelling and Visualization - Animal Farm Design Experience Please provide examples of your previous work related t...
I'm in need of an experienced architect who can help me design and...experienced architect who can help me design and visualize an animal farm primarily for chickens. Key Requirements: - Designing the architectural blueprints for the farm - Creating 2D, 3D visual representations of the farm - Planning the layout and dimensions of the chicken housing - Creating differnt rooms for different needs Features Needed for Chicken Housing: - Automated Feeding Systems - Temperature Control - Waste Management Systems I am open to suggestions and ideas for creating an efficient and animal-friendly environment for the chickens. Ideal Skills: - Architectural Design - 3D Modelling and Visualization - Animal Farm Design Experience Please provide examples of your previous work related t...
...a UI designer to create a modern and sleek user interface for an ESP32/Arduino and a sensor based project. The design should feature gauges and other components in various colours completing a modern and clean aesthetic design. The UI should include the following components: - Sensor Readings: The main screen should present readings from various sensors in a clear and easy-to-understand format. - Real-time Graphs: The design should incorporate real-time graphs that display data trends in an engaging and user-friendly manner. - Control Buttons: The UI must also include control buttons for user interaction. Ideal candidates should have: - Proven experience in UI design for IoT projects, particularly for ESP32/Arduino. - Proficiency in creating sleek, mod...
...unnecessary notifications should be avoided as much as possible. The purpose of this technology is to provide a new technology that can notify the driver of the presence of other vehicles at an early stage and has a low possibility of making unnecessary notifications. 【2. Technology to be Searched】 The technology to be searched is about vehicle notification devices. The device is equipped with a sensor that collects information about the surroundings, a direction indicator that changes state by the driver's operation, a notifier that notifies the driver of the presence of other vehicles that require attention, and a unit that controls the notifier. This control unit determines whether there is another vehicle running towards the host vehicle on the opposite side of the lane...
...storage device with power supplied from an external vehicle charging facility. In recent years, the development of electric vehicles capable of “plug-in charging” using a charging cable for power supply has been progressing, and there is a problem of heat loss at the charging facility, charging cable, and vehicle charging inlet. Therefore, technology is required to protect these from excessive temperature rise. On the other hand, to shorten the charging time, it is necessary to increase the charging power, and this may cause excessive heat rise at the contact point. Therefore, by providing a cooling mechanism, we aim to protect the charging cable and inlet appropriately while shortening the charging time as much as possible. However, in a market where charging facilit...
I'm looking for an Arduino expert to setup an Opta PLC that can effectively monitor temperature readings. The system should be able to: - Receive inputs from different temperature sensors and digital inputs. - Monitor a vast range of temperatures from below freezing to above 90°F. - Send email notifications of temperature readings and changes every hour for remote monitoring. The perfect freelancer for this project is experienced in programming Arduino Opta PLCs, utilizing sensors, particularly those for temperature, and setting up efficient email notification systems. Beside technical proficiency, good understanding of thermodynamics would be a plus, but is not a requirement. The end-goal is an efficient and reliable remote temperat...
I'm embarking on a small-scale boutique pasta production venture and I need a consultant to guide me through the pasta production process. Key Areas: - Pasta Production Process: I need expert advice on setting up a small-scale pasta drying process. This includes guidance on the temperature and humidity algorithm to achieve the best pasta outcome, along with equipment options that can be used in a small-scale operation. Ideal Skills and Experience: - Experience in pasta manufacturing is a must, and specifically in the small-scale boutique production sector. - Deep understanding of pasta production process. The focus of this consultancy is mainly on the pasta production process itself. You'll be expected to provide detailed guidance on how to set up an efficient pasta pro...
Task description I am in need of a competent freelancer with proficiency in arduino, particularly for STM32 microcontrollers (specifically the NUCLEO-G491RE model) and ESP32 microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Di...
I'm in need of an Arduino expert who is adept at programming a small Arduino circuit to control LEDs, a motor, and sound. It will be integrated into a small, Matchbox/Hot Wheels-sized fire truck. The LEDS will flash alternately to represent the emergency lights. The motor will power the back wheels and the sound will play through a small speaker as a siren and horn. Here are the requirements for the project: I believe the Arduino MKR Zero would be a good fit since it has the integrated micro SD card holder and sound processing capabilities. It also has an integrated battery charger. The Arduino needs to be powered by a rechargeable Lithium Polymer battery like 3.7 Volts. - Control LEDs: I believe I can get by with two white 3mm LEDs. I will install fibr...
[URGENT] Finish by today My existing iOS application is built in Swift and I'm looking to add a new functionality. The app currently utilizes the LIDAR sensor available in Iphone 12+. It allows user to take picture which also saves depthmap and other variables such as distance from phone to the object in the center of the screen and etc to the files app. I would like you to: - Instead of saving the image,depthmap and other variables (current in a json file) in the files app - Send the images and other data to a server via HTTP post request, and display the received processed image back from the server on the screen along with other data as well. Budget is only $150 as this is a 3 hours work max. Ideal Skills and Experience: - Proficient in Swift and iOS app development - Ex...
I am seeking a professional and capable freelancer to create a home automation system using Arduino technology. The system should incorporate some form of MIDI control for traktor Dj software - **Expertise Required** - Strong knowledge of programming Arduino. - Prior experience in home automation design and implementation. - Proficiency in achieving interoperability between different smart home systems. - Familiarity with MIDI controls. - **Key Features** - The use of knobs, faders, and buttons on the MIDI controller to enable intuitive interaction with different systems. - Lighting control: an easy-to-use and versatile system to control various lighting fixtures around the house. Please provide examples of similar projects you have completed previously.
I require an IoT expert to create an advanced system for a parking boom barrier. The end result should be a fully functional, IoT-enabled device. Key areas of functionality to be incor...IoT-enabled device. Key areas of functionality to be incorporated are: - Automatic vehicle detection - Real-time data monitoring - Mobile app integration The automatic vehicle detection system should be implemented using: - License plate recognition - RFID tags - Sensors for detecting vehicle presence The ideal candidate for this project should have demonstrable experience in IoT device creation, sensor technology, mobile app integration, and real-time data monitoring. Knowledge in license plate recognition and RFID tags usage is a huge plus. Your expertise will be vital in bringing this projec...
...Bluetooth iOS app from scratch for controlling low-complexity Arduino devices, particularly LED lights. Key aspects of the project include: - Developing the app from ground zero: As the app isn't based on any existing software, the developer has creative license within the confines of my requirements. - Arduino Device Control: The main function is to control Arduino devices. Familiarity with Arduino-related software is strongly preferred. - Bluetooth Connectivity: The app should maintain stable bluetooth connection with the Arduino devices. - User-friendly interface: It should have an aesthetic, yet functional UI that's easy to navigate. Ideal Skills and Experience: • Extensive knowledge in iOS app development • Proficiency wi...
...individual who can establish a connection between an Arduino (ESP 8266) and Firebase. This connection is essential as it's intended to control and monitor environmental sensors remotely. Key Requirements: - Impeccable expertise in Arduino programming and configuration, specifically the ESP 8266 module. - Proficiency in Firebase setup and integration. - Experience in real-time data collection and storage. - Prior work experience in remote device monitoring and control. The project entails the following key aspects: - Establishing a secure and reliable connection between the Arduino (ESP 8266) and the Firebase platform. - Programming the system to enable remote monitoring and control specifically for environmental sensors like temperature and humidity. ...
Captar dados de um sensor BLE em um Access Point Aruba 515 e enviar para a nuvem. Tenho o sensor, o AP Aruba 515 e a nuvem.
...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...
I'm looking for an experienced engineer who can perform a Thermal Finite Element Analysis (FEA) on a stainless 304 tank of 400 x 300 diameter, incorporated with a coil. Here's precisely what I need: • Analyze heat transfer within the tank to maintain a low temperature between 0-100°C • Develop an effective solution in response to the details and dimensions provided • Produce a comprehensive report detailing findings, methodologies, and containing relevant diagrams Skills and Experience: • Proficiency in a FEA software package (e.g., ANSYS, Comsol, etc.) • Extensive experience in thermal modelling and heat transfer calculations • Sound knowledge of stainless 304 properties and characteristics • Engineer degree or above in a relevant...
I'm looking for experienced circuit designer who can design sensing circuit for RTD temperature sensor. Sensing should be done by STM32F103 microcontroller ADC. There should be 8 channels for RTD temperature sensor. I need Schematic design and sample code to read temperature value. Only bid if you have experience with RTD temperature sensor.
CODE IS DONE, JUST NEED SOME ADJUSTMENTS ON CODE + APP MADE ON ANDROID STUDIO I'm loo...ESP32 platform is necessary in order to facilitate communication between the app and the device. This includes the ability to send and receive data. Android Studio: Proficiency in Android app development is crucial for this project. You should be able to create an intuitive user interface that allows for seamless control of the ESP32 device. - Sensor Data Handling: An understanding of how to read and display sensor data, in this case, temperature and humidity, is a plus. - u-blox GNSS Module: Experience working with GNSS data, particularly from the u-blox module, will be advantageous for this project. If you have the necessary skills and experience, I look forward to dis...
I am seeking a professional, experienced in KNX installations, to implement a home automation system tailored for my bedrooms and bathrooms. Your focus should primarily be: - Setting up light and temperature control systems for optimal comfort. The ideal candidate for this project has prior experience with KNX installations, particularly with home automation focusing on light and temperature control systems. Personalized and strategic placement of these systems will help me achieve my desired outcome. Your technical expertise and ability to provide efficient and effective solutions could make this home automation dream a reality.
I'm in need of a skilled electronics engineer to assist with an educational circuit design project. The circuit is intended for advanced learners, so it should be challenging yet educational. Key requirements and responsibilities include: - Designing a complex circuit for educational purposes - Ensuring that the circuit is advanced enough to engage students at a high level - Preparing documentation and guidelines for understanding the circuit Ideal skills and experience for this job include: - Proven experience in advanced circuit design - Prior experience in educational circuit design is a plus - Excellent communication skills for creating thorough documentation Looking forward to hearing from passionate electronic engineers who can help me with this exciting project.
I'm seeking a skilled programmer to assist in developing a taekwondo scoring system. The project entails crafting code for a system comprising one master and four slave devices all to be programmed using Arduino. Wireless communication between the devices will be facilitated through the ESP-NOW protocol. The job entails several key responsibilities: For the SLAVE devices coding : 1. Each slave device should feature an initialization green LED that indicates successful wireless communication with the master device. 2. Additionally, each slave will have two LEDs, one red and one blue, which will illuminate when specific buttons (B1 to B3 for blue team, R1 to R3 for red team) are pressed by the user. 3. With a total of six buttons per slave device, each responsible for assigning...
I am working on a project to develop a wireless sensor for vibration analysis. I have already defined some components of the system. I need someone with experience in electronic component design to help me evaluate the chosen components and assess the feasibility of applying these components in a prototype. This person will be responsible for the PCB's technical design (Gerber and CAD) and prototype testing. The hardware design must consider hardware and firmware (software) limitations. My initial idea is to use a Seeed Studio microcontroller controlling different types of accelerometers. If the person has a better approach, I have no problem following their advice. Below is a list of the components I am considering using in this project: Sensors:
...-Comparing fleet tracking devices Functionality Technical specifications Cost -Choosing fleet tracking devices for specific applications Plugin Hardwired Dashcams Rugged/exterior mounted applications - construction, landscaping, etc. Remote deployments Battery powered Solar powered Kill switches Temperature sensors -Is it legal to install fleet tracking devices in my vehicle? - Disclaimer: we cannot give legal advice, seek professional advice for your particular situation - in most states where the company owns the vehicle, yes...
El programa a desarrollar permitirá controlar de forma dinámica y eficiente múltiples paneles LED RGB de 64x32 píxeles utilizando un ESP32 y el entorno de desarrollo Arduino IDE. Se podrán cargar y mostrar una o varias imágenes estáticas, así como texto en movimiento con una velocidad y dirección definidas. Funcionalidades: Mostrar una o varias imágenes estáticas en los paneles LED. Desplazar texto en movimiento horizontalmente a través de los paneles. Ajustar la velocidad y dirección del movimiento del texto. Soportar de 1 a 5 paneles LED RGB para una mayor flexibilidad en la configuración.
...forward to creating an extensive LoRa mesh network with more than 50 nodes. The primary purpose of this setup is for smart city infrastructure, industrial monitoring, and agricultural monitoring. This network will majorly handle the transmission of sensor data, commands for execution, scheduled on/off, node grouping, node discovery and group command. Ideal skills and expertise include: - Solid understanding and experience with LoRa Mesh networks - Ability to design and implement a network for more than 50 nodes - Experience with integrating sensor data, executing commands, scheduling on/off, node grouping, and disseminating group commands - Familiarity with smart city infrastructure, industrial monitoring, and agricultural monitoring applications. Succinctness, attentio...
...project that focuses on AI and Machine Learning. The AI/ML algorithms are in place but I'm in need of an IoT expert to help establish a robust Arduino-based connectivity solution. Key project requirements: - Completion of IoT connectivity: I need someone who can work with Arduino and establish a reliable IoT connectivity system. - Troubleshooting existing code: The project is partially done, and there might be some debugging required. - Documentation: I'm also looking for someone who can provide clear documentation of the implemented IoT solution. Ideal skills and experience: - Strong Arduino and IoT background: An expert in IoT systems and Arduino programming. - Familiarity with AI/ML: While not strictly necessary, a good understanding of AI/ML m...
...data about house layouts and temperature readings. Users should be able to view different floors and sections of the house, and interactively explore various parts of the model. Color Coding: Implement a color gradient system to represent temperature ranges effectively. For instance, blue could indicate cooler temperatures, while red could signify warmer areas. The gradient should be adjustable to accommodate different temperature scales and user preferences. 3D Wireframe Model: Utilize a 3D wireframe model for the house that users can rotate, zoom in and out, and navigate to understand spatial temperature distributions better. Ensure the wireframe is detailed enough to include major architectural elements like doors and windows for more precise temp...
I need someone skilled in Arduino for a robotics control project centered around security. Here's what I hope to achieve: - Integration of Arduino with an existing access control system. Ideal skills would be proficiency in Arduino programming, experience in security system control, and knowledge in automation. Your proposal would stand out if you have handled such tasks before and can complete the milestone within the budget of 2k INR. Looking forward to a successful collaboration.
