I am seeking a Fusion 360 expert to design a mechanical and electronics product for industrial use. While I have a rough idea in mind, I am open to suggestions and collaboration. The ideal candidate should have experience in both mechanical and electronics design, as well as expertise in using Fusion 360 software. The project will involve creating detailed sketches and developing a concept that meets the specific requirements for industrial use. Strong problem-solving skills and attention to detail are essential for this project.
Operar maquinaría calzado industrial
My project requires an advanced flow modelling analysis focusing on a specific model at an extremely detailed level. For this purpose, I prefer using the ANSYS Fluent software, which offers powerful capabilities for computational fluid dynamics (CFD) simulations. B...advanced flow modelling analysis focusing on a specific model at an extremely detailed level. For this purpose, I prefer using the ANSYS Fluent software, which offers powerful capabilities for computational fluid dynamics (CFD) simulations. By using the rich set of built-in physics models of ANSYS Fluent, I will be able to accurately simulate flow, turbulence, heat transfer, and reactions for industrial applications ranging from air flow over an aircraft wing, to combustion in a furnace, to (in this case) detailed flow ...
I am looking for an architect who specializes in industrial architectural design. The project is a small-scale project, involving the design of a single building. I am open to suggestions and do not have specific requirements or guidelines for the design. The land is 0.9 Acres flat land, that has to be constructed and built from scratch. The land should have the following: - Drive way and vehicle park that can accommodate 20x cars - 500sqm of the land to be used for the construction of an open space structure where factory will be done - The remaining part of the land to be used for Stores/ warehouses and office Ideal skills and experience for the job include: - Expertise in industrial architectural design - Creativity and innovation in desig...
I am in need of a freelancer who can assist me in developing a gimbal naturals frequency simulati...developing a gimbal naturals frequency simulation and system, 2 axes 0.3 G-Force durability and stability, flexibility on mirror frame ( on two axes ) sag of the frame due to force that applied on the frame. The purpose of this system is for Robotics/Industrial Automation. Preferred simulation software requirements include MATLAB, ANSYS, or no preference. I would like a detailed report on the simulation results, including graphs and charts. Ideal skills and experience for this project include expertise in Robotics/Industrial Automation, familiarity with simulation software such as MATLAB or ANSYS, and the ability to generate detailed reports with visual representat...
My company is looking for an On Field Service Technician who can provide regular maintenance on industrial machinery (xray machines in airports). We are not looking for someone with any specific qualifications or certifications, just someone with general maintenance expertise. The ideal candidate will be reliable, have excellent communication and problem-solving skills, and have prior experience with maintenance of industrial machinery. We are a fast-paced environment and candidates must be able to work effectively with minimal supervision. If you think you have the skills and experience to take on this role, we would love to hear from you. we pay at least 8 hours/ day he should be available to work sometimes after 5 pm and the weekends We prefer a candidate from Missi...
I am looking for a freelancer to design a logo for my solar panels/systems factory. (GCC Energy) Colors: I am open to any colors, but I would prefer suggestions based on my industry and/or country (UAE) Style: I would like a minimalistic or simple modern logo that represents the nature of the solar industry. Branding: As this is a brand new venture, there are no existing branding materials to align with. However, the logo should reflect the industry standards. Submission: high quality original file with all layers unlocked + any used fonts Ideal Skills and Experience: - Strong graphic design skills - Experience in designing logos for industrial or technology-related businesses - Understanding of the solar industry and its visual representation - Ability to create...
I am looking for an Azure IIoT expert who has expertise in IoT protocols and devices. Project Type: - I am looking to implement an IIoT system. Timeline: - The expected timeline for the project is less than 1 month. Ideal Skills and Experience: - Strong knowledge and experience in Azure cloud services. - Expertise in IoT protocols and devices. - Proficiency in data analytics and visualization. If you have the required skills and experience, and can complete the project within the given timeline, please apply.
I am looking for a freelancer who can assist me with onboarding industrial sensors onto the Microsoft Azure platform. I need help with the entire onboarding process, including setting up the devices and configuring them on Azure. Key requirements for this project include: - Expertise in working with industrial sensors and their integration with IoT platforms - Familiarity with the Microsoft Azure platform and its IoT services - Experience in setting up and configuring IoT devices on Azure - Knowledge of basic data security measures for IoT devices The ideal freelancer should have a strong background in IoT device onboarding, specifically with industrial sensors, and should be able to ensure basic security for the data transmitted by these devices. If you have the ...
ES UNA EMPRESA DE IMPORTACIONES Y EXPORTACIONES INDUSTRIAL, MATERIA PRIMA, ETC SE REQUIERE UN PROFEIONAL QUE TRABAJE HASTA NUESTRA ENTERA SATISFACCION SOBRE LA PAGINA WEB 1) LA PAGINA DEBE DE SER SENSIBLE A VARIOS DISPOSITIVOS PC, MOVIL, LAPTOP, TABLE 2)UN EJEMPLO DE DISEÑO FUNCIONES PARA NUESTRA PAGINA SERIA LA SEGUIENTE 3) DEBE TENER UN COTIZADOR, 4) COMUNICACIÓN DIRECTA, DEBE ENLAZARSE CON WHATSAPP EN LA ESQUINA INFERIOR DERECHA 5) BLOQUEO DEL BOTON DERECHO DEL MOUSE 6) MAS FUNCIONES , DETALLES Y DIESEÑOS SE VERÁN EN EL EJEMPLO 7) EL TIEMPO DE EJECUCIÓN DE ESTE PROYECTO DE 15 A 30 DÍAS 8) SE CUENTA CON EL DOMINIO Y EL HOSTING
Project Description: We are seeking a highly skilled and experienced SolidWorks expert to collaborate on the design and development of various machines related to soap and detergent production, as well as coconut processing. The selected freelancer will be responsible for creating detailed 3D models, assemblies, and engineering drawings of the machines, ensuring they meet industry standards and performance requirements. Scope of Work: The freelancer will be required to: Machine Design: Design and develop soap and detergent-related machinery, including mixing and blending equipment, extruders, and packaging systems. Design a range of coconut processing machines, such as coconut peeling, coconut flakes, coconut powder, coconut shredding, and coconut grinding ma...
Mechanical Engineer Needed to Develop Custom Fully Automatic Vertical Door Opening and Closing System - Purpose: Industrial Use - Method of Operation: Fully Automatic - Door Specifications: Custom Dimensions Skills and Experience Required: - Strong background in mechanical engineering - Expertise in designing and developing custom automated systems - Familiarity with vertical door systems and their components - Proficient in CAD software for creating detailed designs - Knowledge of electrical systems and controls for automated doors - Experience in testing and troubleshooting mechanical systems - Ability to work collaboratively with a team and communicate effectively
I am looking for a freelancer who can design and build a control box for an industrial cooking tank. The control box needs to have the following features: Control Method: - The desired control method for the control box is Programmable Logic Controller (PLC) control. This will allow for precise and efficient control of the cooking tank. Power Supply: - The control box should be able to operate on a 380V AC power supply. This is the required power supply for the control box. Sensor Type: - The control box should be equipped with a temperature sensor pressure switch . This will enable accurate monitoring and control of the cooking tank's temperature. Skills and Experience: - Experience in designing and building control boxes with PLC control is a must. - Knowledge of e...
I'm in need of world-class industrial product design to bring my innovative and unique concept to life. My product will have multiple functions that must be addressed through a thoughtful, creative, and aesthetically pleasing design. My design should stand out and be truly unique, solving a practical problem in a creative way that is useful and aesthetically pleasing. I have a very specific concept and am looking for the right professional designer to convert it into something extraordinary and unique.
Hello, A rapid prototype is required for a pump. (.stl) desired for 3D printing. A freelancer who can assist a mechanical engineer or an industrial designer. Freelancer offers suggestions for type of 3D printing and material (not durable). A design having; a mechanism oscillating spiral impeller, and perforated cylinders, electric motor... est. The liquid is fed and emerge through the holes of cylinders. It is used to develop a procedure that is still in its early stages. It is sufficient to have reasonable expectations for an immature design. Not deviating from the provided description is what's most crucial.
...impactful logo design for Southeast Turbo Machinery Equipment, a leading industrial distributor. The logo should encapsulate the essence of our brand, which is synonymous with quality, reliability, and innovation in the industrial sector. We do not want a text only logo. Make sure to follow Size & Color guidelines. 2 Color is an OPTION. Design Requirements Technical Specifications Resolution: 300 DPI Dimensions: 549 x 132 pixels File Format: JPG Color Scheme: Black & White with a 1-color option Style and Elements -Typography: The font should be clean, easy to read, and professional. It should align with the industrial nature of our business. -Imagery: Consider incorporating elements that reflect machinery, pumps, compressors, or industr...
The project is to run a complex process model which is currently excel based, using data from a live process or historical process data server to feed into the model which will in turn run and analyze the data. The running m...and analyze the data. The running model will map the current process and produce a number of outputs which can be used to optimize the actual running process and predict the output. In terms of output we are looking to produce graphical displays which will show the actual running data vs the model; these displays can be within excel or displayed on a web page etc. The data source is from an industrial control system and can be read via an OPC server, DDE, or from the historical database which is based on OSIsoft PI which can be queried in a number of diff...
Computer Vision System for Industrial Automation - The main goal of this project is to develop a computer vision system that can detect objects in real-time for industrial automation purposes. - The system should be able to accurately identify and track various objects in an industrial setting. - The ideal candidate will have experience in computer vision algorithms and techniques, particularly in object detection. - Familiarity with real-time processing and optimization techniques is highly desirable. - The system should be capable of operating in real-time to ensure efficient and timely automation processes. - The ability to integrate the computer vision system with existing automation systems is a plus. - Strong programming skills in languages such as Python and C+...
I am in need of a logo for my up and coming company. My company is in the heavy equipment/ industrial equipment repair industry. I am looking for an iconic logo that embodies the robustness of a heavy equipment business. I do not want the full company name to be included in the logo, just the initials (AES) ; rather, I am looking for a minimalist logo that can capture the essence of my company's mission. The logo should evoke trustworthiness and quality in my industry.
...I won't pay brokers(freelancers) anything including commissions until the shipments made from our factory in Taiwan. However its never an obligation for you to do it. Just reach me if you are interested and capable of doing it and agree to our above payment term. I am on behalf of one registered manufacturer located in Taiwan: () and Google site: () looking for someone who can be serious to source real buyers of air powered pneumatic tools in Germany. Never try scams as we are always vigilant on online scams. Specifically, I am looking for serious dealers who are engaged in air impact wrenches that meet the EU product safety standards. The project of buyers budget is open to different price
We are a robotics company specialising in packing robots for fruit and vegetables. Our robots are placed in packing sheds to pack the fruit after it has been harvested. Up till now we have only deployed robots one at a time. We need to show investors and customers what several robots will look like in the packing shed environment. We need a realistic illustration of five industrial robot arms picking and packing avocados off a conveyor belt, in a packing shed. Example videos and images attached. Robotic arms should not be in work cells like in our reference images, but placed side by side with conveyor belts between them. You will get a better idea from the attached. Example videos:
I'm looking for a talented professional with experience in designing industrial concrete formwork in British Columbia, Canada. Specifically, I need someone who can quickly implement changes to an existing formwork drawing that currently requires an engineer's stamp of approval. The changes must be completed within a one week timeframe and hold up to industry standards. The design needs to meet specific requirements that I will provide during the project to ensure it is up to par with necessary safety and performance standards. Any engineer selected for the job must be skilled in industrial formwork engineering and design. They must be able to work with industry documents, and advise on revisions or adjustments which meet industry standards. I...
...Engineer Description: I am looking for a skilled and experienced robot engineer to assist me in designing and developing an industrial robot for manufacturing purposes. The ideal candidate should have a strong background in robotics, specifically in the field of industrial robotics. Requirements: - Proficiency in designing and engineering industrial robots - In-depth knowledge of manufacturing processes and requirements - Ability to develop and program robotic systems for efficient and accurate manufacturing operations - Experience in integrating robotic systems with existing manufacturing equipment and processes - Familiarity with safety regulations and protocols for industrial robots - Strong problem-solving skills and ability to troubleshoot technical i...
I am looking to hire an experienced Industrial Automation PLC engineer to help build a new system from scratch. The engineer must have extensive knowledge in Allen-Bradley systems, as that is the system we plan to use. The system will be large-scale and require a complete overhaul and design from the ground up. We anticipate that this project will take more than three months to complete, so the ideal candidate must be able to devote the necessary time and attention to the project. If you have the qualifications and experience required for this project, please reach out to discuss it further.
I am looking for a skilled designer to help me create a business name and logo/brand design for my Industrial cleaner business. Where the logo forms part of the branding. While I have a rough idea in mind, I am open to suggestions and creative input from the designer. We will be selling industrial cleaners and degreasers. Requirements: - Experience in creating brand identities and logos - Strong understanding of retail industry and target audience - Ability to incorporate cool colors such as blues, grey, and purples into the design (or just blue) - Attention to detail and ability to create a visually appealing and memorable logo Skills: - Graphic design - Branding - Creative thinking - Knowledge of color theory If you have a knack for creating unique...
I am looking for a freelancer to help design a large-scale solar plant that will ultimately be used for industrial purposes. The desired output capacity for the plant is less than 1MW. The solar plant will be on a large scale, with the output capacity ranging in the 100kW+ range. This solar plant should be designed in such a way that it meets industrial standards, and is efficient and reliable. Ideally, the team of freelancers who bid on this job should have the relevant experience and expertise to create a successful solar plant.
I have files from a previous "architect" who got disabling sick and could not continue with this task. He left .dae and .pln files, but i don't know for which software using them. I need help with designing mostly factory interior and people. I'm super busy with other stuff so this job will develop in burst now and then when i have time to spend on it. Im on a tight budget, so a low hourly fee is apricated.
I am looking for a freelancer to design an industrial space frame for a large area, measuring 10000 sq ft. The purpose of the design is to create a sturdy structure for industrial use. Skills and experience required: - Strong expertise in space frame design for industrial structures - Proficiency in working with steel materials - Ability to create a robust and durable design that can withstand heavy loads and provide structural stability - Knowledge of industry standards and regulations related to space frame design If you have the skills and experience to create a reliable and efficient space frame design using steel materials, please submit your proposal.
...Experience: - As a mechanical engineer, you can design industrial components and analyze movements. - Experience in rapid prototyping - Knowledge of pump design and functionality - Proficiency in working with plastic materials - Ability to create a functional and durable prototype Duration: - This question was skipped ----- Hello, A rapid prototype is required for a pump. (.stl) esired for 3D printing It's a pump. A design having; a mechanical mechanism oscillating spiral impeller, and Perforated cylinders, ... ets. The liquid is fed and emerge through the holes of cylinders. It is a physical model that is being used to develop a procedure that is still in its early stages. It is sufficient to have reasonable expectations for an immature design...
I am looking for an industrial designer who specializes in medical device design for the specific purpose of designing an assistive device. I have a detailed plan regarding the functionality and features needed, and the primary demographic for the device is adults. The designer should possess the skills necessary to bring my device to life from concept to production, as well as knowledge and experience in regards to the current regulatory requirements for medical device design. Engineering is already done, I need the final design touch to create a real product.
REPORT OF PLANT DISCREPANCIES Inveno Engineering has compiled a large database of static information in reference to industrial steam systems. This database of information is stored in multiple Excel spreadsheets. We will use the term “record” to designate all information relative to a specific plant non-compliance with respect to industry codes or accepted practices. Based on on-site inspections performed at various plants by our Field Engineers Inveno determines whether a plant is either “In Compliance” or “In Discrepancy” with respect to the individual issues contained in the “records”. These records contain information relating to the possible causes of a discrepancy, the consequences of allowing these discrepancies to go unres...
Project Overview We are an industrial AI company that focuses on making CV based AI softwares which deliver real value. We are looking for a freelance web designer to create new designs for three pages of our website: the homepage, the customers page, and the products page. Project Requirements The new designs should be in a light theme and should use the same logo assets as our existing website. The designs should be mobile-friendly and responsive. The final deliverables for this project will be PNGs and Figma files of three high-quality web page designs. The timeline for this project is 3 days. Multiple entries are appreciated. Early entries would also get reviews. Project Scope The homepage design should include the following elements: A clear...
I’m looking for a photographer to take packaging and repackaging photography for Americold. The type of photography needed is both product packaging and shipping packaging. This project requires a specific location; I have one in mind for the photoshoot. The desired style for the photography should be professional and formal, but also modern and trendy to capture the industrial warehouse atmosphere.
Project Title: Craig claims that lumbering was a "connective enterprise." What does she mean by this? (250 words) Project Description: - I am seeking a skilled freelancer who can provide a detailed analysis of Craig's claim regarding lumbering as a "connective enterprise." - The successful freelancer should have experience in conducting detailed analysis and research in historical and industrial contexts. - The freelancer should include past work examples that demonstrate their ability to conduct detailed analysis and provide comprehensive explanations. - The level of detail needed in the explanation is a detailed analysis, which requires attention to the attached source - The ideal freelancer for this project should have a strong background in history rel...
I am looking for a freelancer to create civil structural drawings for an industrial building. I have no specific requirements or design guidelines, but I do need the drawings to be in-depth with material specifications. I am looking for someone who is experienced with engineering and construction drawings and can provide a thorough and accurate set of drawings for the project.
I am looking for a freelancer to help me with my BESS (Battery Energy Storage System) and Peak Shaving project for and industrial customer . The purpose of this project is to reduce energy costs in peak hours evaluating the use of solar and possibly small wind. Skills and Experience: - Experience in battery energy storage systems and peak shaving projects - Knowledge of renewable energy integration - Strong understanding of grid stability - Ability to work within a tight timeline and complete the project within 1 month Project Requirements: - Design and implementation of a medium-sized BESS (1-5MW) - Integration of the BESS with the existing energy grid to improve grid stability - Optimization of the BESS to reduce energy costs - Knowledge of renewable energy sources and t...
Watch Designer - Industrial Design I am looking for an experienced watch designer to create a luxury watch design using stainless steel material. Features and Elements: - The client has specific features in mind for the watch design, which will be discussed further during the project. - The ideal designer should be able to incorporate these specific features into the design. Skills and Experience: - Strong background in industrial design, particularly in watch design. - Familiarity with luxury watch design trends and styles. - Proficiency in working with stainless steel material. - Ability to collaborate with the client to bring their vision to life. If you have the skills and experience in luxury watch design and a...
Product Design for Industrial Equipment with TFT, Touch, and Processor Card The main purpose of this project is to design a industrial panel PC product for industrial equipment. We can use off the shelf available processor board, if the designer can suggest some, it will be great Key Functionalities: - The product must have the capability to display information. - There is no need to control an external device. Processor Card Requirements: - There are no specific requirements for the processor card. Ideal Skills and Experience: - Experience in industrial equipment product design. - Proficiency in designing TFT displays and touch interfaces. - Knowledge of processor card integration. Please provide examples of previous industrial...
We would like to solve two LOGOS: NDS NON DIRECT SYSTEM keywords: Non direct (Indirect) cooling (refrigeration) technology High (system) operating (operational) efficiency Operational savings up to 50 % compared to other commercial technologies Industrial cooling technology with a long service life (lifespan) Full use of waste heat (use of heat-recovery system) Heat accumulation AOR ADVANCED OPTIMIZATION (AND) REGULATION keywords: Advanced regulation of NDS technology Optimalization of the cooling factor (COP - Coefficient of performance, EER Energy efficiency ratio) and energy (efficiency) demand of the technology Work with energy fluxes Basic LOGOS follow each other and complement each other, but they can also be use independently
...other open-source software - The system needs to detect below behaviours such as: • Distracted Looking elsewhere • Distracted on the Phone • Sleepy • Tired • Drinking Water • Sleeping • Unconscious - The detection should be possible even with sunglasses being worn - The system should not require internet connectivity - Hardware Requirements: o Should run on an industrial SBC ( I have a beaglebone black industrial but can be others) o The camera solution should have an infrared option for night vision o The developer needs to indicate the required hardware o The hardware needs to have a signal output for other equipment (i.e. Digital Outputs) to indicate when: The Hardware is healthy Person has been detected Minor Distr...
Need an design idea for Header, footer and the interior of the Home page, which must have two sliders (latest products and a larger slider for special products). A modern home page design should be made to match the content of the site (industrial components, cnc equipment and tools). Make this design in high resolution .png format. Make at least 3 prototypes that I need to choose, so if there is a need for refinement or recombination, to make a revision. Keep the colors and the existing style as it is on the existing site Do not put a lot of gaps between the elements, I want the page to be compactly filled without a lot of empty space vertically between the elements. Here is old home page design which need to be redesigned: Here is new web site un...
We need a full-width custom layout Homepage mockup only (winning entry must submit layered PSD file, fonts used, and images used for the design) This site is for a General Contractor that is focused on Industrial and commercial builds There will not be e-commerce on this site. Please, do not include e-commerce features in the design. Logo will be included in Files () The primary colors for the design will be [#9e1d21 , #243873] Header hero area will be a VIDEO LOOP, please use images/clips of [Commercial Construction, Commercial build, Industrial architecture, Construction site, Construction foreman(& or) workers] Highlights: Wanta a project map [see here for example: ] Nav: [HOME, ABOUT US, SERVICES, QUOTES, PROJECTS, SAFETY, CONTACT
...understand product specifications and branding requirements. 2. Utilize reference photos to create high-quality, realistic mock-ups of products. 3. Implement design revisions based on feedback. 4. Ensure consistency in design across all product visuals. 5. Stay up-to-date with design trends and competitor products. 6. Adhere to all project timelines and deliver on deadlines. **Qualifications:** 1. Bachelor's degree in Graphic Design, Industrial Design, or a related field. 2. Minimum of 5 years of professional experience in product design. 3. Strong portfolio showcasing best projects (required for application). 4. Proficiency in design software such as Adobe Photoshop, Illustrator, or similar tools. 5. Attention to detail and...
I am looking for an experienced mobile app developer to create an app for industrial and craft services. The app should be developed for both iOS and Android platforms. Main Features: - Booking Services: Users should be able to book different services offered by professionals in the industry. Designs: - The client already has all the designs for the app, so the developer will not need to create any new designs or wireframes. Ideal Skills and Experience: - Strong proficiency in mobile app development for iOS and Android platforms. - Experience in integrating booking systems and managing inventory within mobile apps. - Familiarity with communication platforms within mobile apps. If you have the necessary skills and experience, and can work with the provided designs, please subm...
Busco colaborador para proyecto puntual de programación PLC: Requisitos Generales: - Conocimientos PLC Siemens S7 1512F - Protocolo de comunicación utilizado es Modbus TCP - Conocimientos Panel PC Advantech
I am looking for a talented artist who can create a minimalist machine line drawing for a T-shirt design project. The drawing should depict an industrial machine and should be done in black and white. Skills and Experience: - Proficiency in creating minimalist line drawings - Strong understanding of industrial machines and their components - Ability to create detailed and accurate drawings - Experience in working with black and white color schemes - Attention to detail and ability to capture the essence of the machine in a simple and elegant way If you have the skills and experience required for this project, please submit your portfolio showcasing your previous line drawing work. Thank you!
