任务： 1、集成Arduino，实现正常的初始化、连接Arduino硬件，并且支持向Arduino上传代码； 2、UI调整； 以上第1步已经完成集成Arduino部分，初始化、连接存在BUG，需修复，上传代码功能待实现。
我有进行中的、与之前的项目相关的工作parsing jsonarray using Arduino mega with esp8266-12 '
主要是想仿真一个激光测距的，暂时可以不考虑激光传感器，只需要模拟出计算时间差然后乘以光速，最后显示在LCD显示器上。自己已经做了一部分，proteus图已经画好，程序但是有点问题，求帮忙，有偿。
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
...accelerator. Our main objectives for this project are: • Research and development specifically relevant to unsaturated polymers • Achieving an optimal medium cure time • Minimizing waste through precise usages of chemicals at specific temperatures Our goal is to achieve the best cure time and minimize waste. However, we’re facing challenges during the winter and rainy seasons, typically when the temperature drops to around 5 degrees Celsius and the conditions become humid. During these periods, we’ve observed that the reaction does not start as expected. We’re unsure about the precise quantities of hardener or accelerator to use under these conditions. We’re seeking your expertise to help us understand how to adjust the quantities of ...
As the project owner, I require an Arduino Uno code, specifically designed to interact with a fingerprint reader for input, LCD and 14 relays for output. Key Requirements: - The code should identify 14 people's fingerprints (let's say 2 different fingerprints for each person), write the name of that person on the LCD and activate the corresponding relay for each person. - The associated relays will control a particular robotic device. - When an unrecognized fingerprint is scanned, the system should write on LCD "unrecognized fingerprint" without triggering any relay. Ideal Skills and Experience: - Proficiency with Arduino programming - Experience working with fingerprint readers - Knowledge of relay and robotic systems . Familiarity with sensor integr...
I'm in need of an electronics circuit designer who can create a basic level sensor interface circuit for a radio. Key Requirements: - The circuit is a sensor interface for a radio. - The complexity level is basic, meaning it should be able to perform simple functions like temperature sensing. Ideal Skills and Experience: - Proficient in electronics circuit design. - Experience in basic level sensor interface design. - Understanding of radio electronics is a plus.
I have a project that requires setting up an 8 Channel Arduino Relay Module and programming it to operate using a basic 4 button hand controller. My Arduino board of choice is the Arduino Uno. For the hand controller, I need different functionalities: - Each button should be able to toggle a specific relay on and off. - Certain buttons should cycle through a sequence of relays. - Some buttons should have the ability to control a combination of relays. Importantly, only 1 relay should be controlled at a time. The ideal freelancer for this project should have a deep understanding of Arduino programming, particularly with Arduino Uno, and experience with relay modules and controller setup. Familiarity with creating flexible, customizable controls is a p...
Here is a brief description of my project. (Please note: I will not reply back to auto response messages. Also please post the actual price not a price just to get my attention.) My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof...
I'm seeking a skilled indi...handing over after initial setup. The tasks include: - Watering & Nutrient Monitoring: Ensuring plants receive adequate water and nutrients, adjusting as needed. - pH Level Management: Regular monitoring and adjusting for optimal growth. - Temperature Control: Checking and maintaining temperature settings. - Harvesting & Replanting: Timely harvesting and replanting as per the growth cycle. The ideal candidate should have: - Strong background in hydroponics - Proficiency in nutrient and pH management - Experience in managing lighting and temperature settings - Proven track record in harvesting and replanting in hydroponics - Ability to oversee management of day to day operations efficiently and effectively and troubleshoot. ...
...individual to create an innovative IoT solution utilizing an Arduino board and camera module, along with UPC scanning software. This project involves developing a UPC scanner that can accurately read the UPC on a product. Upon scanning, the information of the scanned product such as date, time, UPC, product name and product retail should be transmitted and populated into a web application. Key Tasks: - Develop and integrate the UPC scanning software to be used with the camera attachment for the Arduino board. - Establish a Wi-Fi connection for the Arduino IoT UPC scanner to communicate with the web app. - Ensure accurate transmission and population of the scanned product information in the web application. Ideal Skills: - Proficient in Arduino programming a...
I need an expert in Arduino programming to develop a code that connects to an OV7670 camera, recognizes specific patterns (like a person's head) and triggers an LED. Key Requirements: - Use an Arduino Uno or Nano to interface with an OV7670 camera and LED. - The code should have a pattern recognition feature - specifically, recognizing a person's head. - When the pattern is detected, the LED should light up to indicate an event has occurred. Additional Details: - The code should be able to differentiate a specific pattern (a person's head) from other objects or patterns that may be in the camera's view. - This is an intermediate level project, hence the recognition should be accurate enough to detect the specific object. Ideal Skills: - Proficiency in ...
Написати код для проекту розробка системи контролю мікроклімату на базі arduino leonardo (є також UNO) в середовищі Arduino IDE Макет буде у коробці у якій треба буде продемонструвати роботу. Треба щоб на екрані відображалась поточна температура та також можливість встановлювати температуру через джойстик. Треба щоб значення температури регулювалась через PID-регулятор (програмно) для того щоб пристрої охолодження та нагріву змінювали потужність плавно в залежності від поточної температи. Список датчиків та деталей: 1. Датчик вологості та температури DHT11 (Є також bme 280) 2. Датчик газу MQ2 3. LCD1602 з i2c 4. Джойстик для ардуіно 5. Вентилятор 5v або 12v - для охолодження повітря (такий який в ПК встановлюється) 6. Нагрівальний елемент – лампа накалювання (н...
Advise as to whether vs code or arduino ide would be more suitable Complete a project containing the various pages of code, organised and zipped, ready for unpacking and modification/use. //* comment heavily, briefly explaining the features as you go. Use caps lock for anything that requires editor attention or input. Intended for hardware devices: • Xiao Esp32-S3 Sense (I call 'sense') • a small bulb such as this: • ESP32-4848S040C_I_Y_3 (I call '484') • a small speaker, such as this: Each sense should be assigned the placeholder for 2 micro servos. So if a new sense is selected via the 484 at any time, it is assigned a light as well as 2 servos. No functionality is currently required of the servos but the coding should
I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM
I am in need of a professional who can efficiently handle an RS485 device that requires reconfiguration. The scope of...converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necessary. Please only bid if you are confident with this job, have relevant experience, and can deliver the projec...
I am in need of a skilled professional with experience in developing a Mitsubishi PLC program. The program is intended to control equipment using PID (Proportional, Integral, Derivative) control system. It should be able to handle both analog and digital input/output signals. Key requirements include: - Developing a Mitsubishi PLC program for PID control - In...output to 2 inverters for speed control of mixer and small pump for emptying mixer with on/off and speed control on HMI All controls for Speed and heating and cooling to be on separate pages on HMI Heating and cooling on full pid control via HMI with all variable settings available on screen Date and time to be on each HMi page Page 1 Main menu Page 2 Production Overview Speed and temperature display Page 3 + Sett...
...background in measurement systems particularly using load cells and load cell amps and basic platform development. The objective is to develop a project which measures loads within a range of 10-20kg , with data input to an Arduino microcontroller. The ability to configure an edge device to continuously stream data to a simple BI dashboard on a desktop is also required. The successful freelancer should have the following skills and experience: - An excellent understanding of load cells and how to operate and interpret readings from them. - Extensive experience using Arduino microcontrollers and able to proficiently program and troubleshoot them. - Knowledge on how to integrate an edge device with this setup, and the skills needed to stream data to a BI dashboard. -Should...
Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where it cam...
...when heat disperse, heat exchange will not be balance. Compression flow must be precision. Must know how a stirling cryocooler works. Must have some knowledge through gas especially density and purity. Pressure generates gas and changes its form. Stirling cryocooler consists of a high pressure compression that compressed the gas back a forward that creates the heat exchange and causes the temperature drop that forms cooling as why it is called cryocooler. Now I have to enter more characters, words as asked in order to have enough so that this can be load through for viewing by freelancers. Gas that makes cryocooler possible are reactive. When they are reactive, they can be put through a debouncing effect that causes cooling different and more advance compare to being c...
...reading a variety of vital signs and sending corresponding signals. This will be the start up phase for the device, which in end phase will be able to detect and alert for other signals like: environmental signals, chemical signals, thermal sensors, motion sensors, and/or communication and GPS signals. Key Features: - The device should have the ability to read heart rate, blood pressure, and temperature. - It should be able to send alert notifications in case of abnormal readings. - The device should also have the capability to send data to a mobile app and a cloud server, allowing for remote monitoring and data collection. Ideal Skillset: - Proficiency in electronics design and prototyping, particularly in the development of wearable devices. - Understanding of medical elect...
I'm in need of a skilled PCB designer to create a design for a straightforward electrical device focused on temperature control. Key Details: - The main function of the device is temperature control. - I already have in mind the components that I need for the device such as temperature sensors, and cooling/heating elements. - The desired temperature range for the device to control is around 40°C. Desired Skills and Experience: - Proficiency in PCB design, particularly in the context of temperature control devices. - Experience in working with temperature sensors and cooling/heating elements. - Understanding of the thermal dynamics and the design constraints of temperature control devices. - Ability to bring this project to life i...
The following features are important for the Smart Thermostat Valve: -There must be temperature and humidity sensors. -For double-sided communication between the thermostat and GateWay, it must be provided with RF 433 MHz communication protocol. -Must be powered by AAA or AA batteries. -Communication between devices should be encrypted for data security. -It should have low power consumption. -All source files must be shared at the end of the project. The Software Gateway requires the following: -Must be able to connect to the internet via Wi-Fi protocol via a Gateway. -The product must be controllable via mobile application. -It should include various automation modes. -The data in the sensors must be tracked during the time they are stored. -All source files must be shared at ...
...3: Common Reasons to Change Insulation Asthma: Upgrading insulation can reduce indoor air pollutants that aggravate asthma symptoms. Allergies: Improved insulation helps minimize allergens and dust particles circulating in the home. Dust Throughout House: Proper insulation reduces dust infiltration, promoting cleaner indoor air. Hot/Cold in Various Rooms: Inadequate insulation can lead to temperature inconsistencies throughout the home. High Energy Bill: Outdated or insufficient insulation contributes to increased energy consumption and higher utility bills. Slide 4: How Most Homes Were Insulated vs. How They Should Be Insulated Illustrate typical attic insulation practices in older homes versus modern, energy-efficient insulation standards. Emphasize the importance of upgr...
...revise my existing pole barn plans to meet the requirements of the Fire Marshal in Louisiana. Key Requirements: - Structural Modifications: The primary changes needed for the plans are structural in nature. These modifications are necessary to ensure the building meets safety standards and regulations set by the Fire Marshal. - Insulation: The revised plans should also include insulation for temperature control. This is essential, as the pole barn will be used for storage and office space. - Ventilation System: Another key requirement is the inclusion of a ventilation system in the plans. This system is crucial to maintain air quality and create a comfortable environment inside the pole barn. Ideal Skills: - Professional Engineering Background: The ideal candidate should have ...
I'm in need of an ESP32 BLE application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific requirements of this project.
I'm in need of a skilled Arduino coder to create a custom code for me. My project primarily involves generating variable frequency range FSK sine wave output. Key Requirements: - Develop code specifically for Arduino R4 board + SD card module - Generate sine waves of different frequencies - Different frequencies - 10,000 different frequencies (integers) - eg: txt file (100,200,300,400,500.................n integers) Frequencies list are stored in a SD card CSV or txt format Arduino new R4 boards has built-in DAC for sine wave generation with ready made library as follows: Code for wave generation --->>> analogWave wave(DAC); int freq = 10; // in hertz, change accordingly void setup()...
...that will be used for sales and marketing purposes. The primary task is to remove any existing graphics from the vans, making them appear as plain white vans, and adjust the images for a professional look. This includes modifying brightness, color temperature, and other necessary photo corrections. Key Responsibilities: Remove all visible graphics from the van images, ensuring the van appears plain white. Where featured, retain the "Courier Academy" logo on the van but ensure no other logos or text are visible. Adjust brightness, color temperature, and make general enhancements to the photos to achieve a professional and appealing look. Remove the "Yellow Express" logo and any yellow references on the man's uniform in the images. Follow the styli...
I'm looking for a skilled an...who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your proposal with relevant examples of your...
I'm seeking an expert in LabView, Arduino programming, and their integration. The aim of the project is to create a system for industrial automation and prototyping that includes: - Real-time data monitoring - Designing a user-friendly interface - Automation and integration of microcontrollers You should ideally hold substantial experience in LabView development and Arduino programming. Your experience should encompass integrating these platforms and implementing the features mentioned above. Knowledge in integrating various sensors into this type of system and achieving real-time data monitoring will be crucial to this project. Any previous work with industrial automation and prototyping will certainly be beneficial.
...comprehensive learning plan intended for various age groups from Kindergarten to college. This curriculum should encompass three main areas: 1. Coding: Should cover various programming languages including Python, Java and foundational learning platforms like Scratch, as well as MIT App Inventor for app development. 2. Robotics: The curriculum should also touch on different robotics platforms - from Arduino, LEGO, VEX, Sphero to Raspberry Pi. 3. Media Arts: In addition, I want to integrate media arts, where students can learn graphic design, animation, videography, and web design and development. Ideal candidates should have extensive experience in pedagogy and skill development in these areas, and be able to create an engaging, age-appropriate curriculum for students acros...
I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...
Buenos días. Estoy buscando una persona con conocimientos en Arduino, ESP32, etc. Hará falta que tenga tanto conocimientos de programación como para el montaje físico. El proyecto inicial consiste en encender una tira led RGB de 24V a través de un detector de movimiento (LD2410C) y mediante la programación realizada que cambie de color según si detecta o no movimiento. Según los conocimientos del empleado se aumentarán las tareas designadas. Tiempo estimado no más de 3h para la realización del diseño y planteamiento del proyecto.
...when heat disperse, heat exchange will not be balance. Compression flow must be precision. Must know how a stirling cryocooler works. Must have some knowledge through gas especially density and purity. Pressure generates gas and changes its form. Stirling cryocooler consists of a high pressure compression that compressed the gas back a forward that creates the heat exchange and causes the temperature drop that forms cooling as why it is called cryocooler. Now I have to enter more characters, words as asked in order to have enough so that this can be load through for viewing by freelancers. Gas that makes cryocooler possible are reactive. When they are reactive, they can be put through a debouncing effect that causes cooling different and more advance compare to being c...
I have an existing Arduino code which requires modification for converting my Bluetooth to BLE compatible for iOS applications. Your responsibility will be to: - Modify the existing Arduino code to make it BLE compatible - AS optional Create an iOS application with a control interface feature. The application should allow users to control and manage a customized smart lock model. Ideal Skills: - Expertise in Arduino code modification - Proven experience in developing BLE compatible software - Proficient in iOS application development, particularly in creating control interfaces - Familiarity with smart lock functionalities would be a bonus. Your services will be reviewed for potential system upgrading needs, hence, I'm interested in individuals who have a pr...
...to select the best shots - Enhancing colors without making them look unnatural - Adjusting white balance, brightness and contrast carefully - Setting the right temperature and saturation levels - Reducing noise and sharpening the images - Cropping the images as needed Your work should be meticulous and not overly edited, keeping the images looking natural while still making them appealing. Ideal Skills and Experience: - Proven experience in professional photo editing - Proficiency in Adobe Photoshop or similar software - Strong understanding of color correction and balance - Excellent knowledge of brightness, contrast, temperature, and saturation adjustments - Demonstrated ability in noise reduction and sharpening - A good eye for detail and composition - Previous exp...
I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.
I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will be sent to the ...
I need a C++ programmer who can answer questions about my project Key Project Requirements: - Have prior experience in C++ programming for Arduino UNO - Familiarity with PixyMon camera - Proficiency in implementing line following functionality The project is urgent, and I need someone who can deliver a high-quality code within a short time frame. If you meet the above requirements, and you're confident in your ability to deliver quickly, please reach out.
I am seeking an Arduino programmer to help with a specific project. Key Responsibilities: - Writing code for controlling reed switches - Displaying data from the reed switches on an LCD Ideal Candidate: - Proficient in Arduino programming and sensor control - Experience in working with reed switches - Capable of interfacing with LCD displays This project requires a good understanding of sensor control, as well as being able to implement the desired display output. Understanding of the specific sensor, reed switches, is a plus. Please only bid if you have experience in these areas.
Here is a brief description of my project. My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof container and be able to be charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a...
I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.
...smart power monitor system I've developed using Arduino. This report will be accompanied by a PowerPoint presentation. The report should contain: - **Technical Details:** I have a basic structure in place, but I'm seeking a professional who can fill in any missing technical information. - **Benefits and Applications:** The report should showcase the potential benefits of this system and highlight possible real-world applications. - **Data Analysis and Insights:** It's important to have a detailed data analysis section, with insights drawn from the information collected by the system. I also need the report to include missing details such as: - **Hardware Components Used:** I'd like the freelancer to list all the hardware components like the Arduino U...
I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...
I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will be sent to the ...
...who can assist me in developing accurate transport equations for solvents in pressure-driven membrane processes. The ideal candidate should have a strong background in membrane technology, polymers, and understanding the impact of concentration and temperature on transport. Key responsibilities for this project will include: - Developing accurate transport equations for solvent and substance transport in pressure-driven membrane processes - Conducting sorption/diffusion analysis in polymers - Examining the impact of concentration and temperature on transport - Constructing and utilizing membrane modules - Calculating flux and selectivity - Analyzing fouling in membrane processes The desired level of accuracy for this project is high, so the successful candidate will nee...
I'm looking for a skilled Arduino programmer who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a button), remo...
I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a specialized p...
