CAM 350 相关版本工程专业 ***************************** panelized 专业小时 界面GPIO或 FPC链接布线 双面混六层 没有太多责任高求 快速完成~付款‘套餐’ 写个脚本 价钱另议
我公司有一个项目， cy7c68013A_128 单片机的软件开发， 细节是用GPIO模仿Jtag烧录两片Xilinx的PROM. (XCF04S, XCF01S). Xilin有比较详细的方案。 见副件。 如果你们承接这类工程， 请你给我一个报价。 我们有硬件平台， 你们需要提供， 1 windows usb 的驱动， 指定等待下载的文件。 Cy7c68013A 的程序，把指定的文件烧录到目标PROM. 启动系统， 读取FPGA内部寄存器，确定烧录成功。
...口管脚也要预留出来，PHY使用DP83848IVV； 6. 串行通信接口 预留出1个RS232用的UART； 预留出1个RS485用的UART，另外还要预留1个管脚用来RS485的方向控制； 7. USB接口 预留出1个USB接口用来外接USB设备； 8. 旋转编码器接口 使用2个外部中断口来接增量型旋转编码器； 9. 蜂鸣器接口 使用一个PWM输出来控制蜂鸣器； 10. GPIO接口 至少预留出32个GPIO口用于外部设备的控制，如键盘输入，指示灯输出，三态安全开关输入，三档选择开关输入等； 基本驱动需求 1. 旋转编码器输入驱动 旋钮编码器驱动要求能判断编码器旋转方向，目前这两个GPIO口不给上层读取, 直接由驱动发送按键值，就是加入LINUX的输入事件，正向旋转发送键值59，反向旋转发送键值60，从event0读取。 2. RS485驱动 RS485需要1个方向控制脚，当向对应的UART发送接收数据时，方向脚能自动实现方向控制。 3. 蜂鸣器驱动 蜂鸣器驱动要求能设置PWM输出的频率，输出的时间，输出时间到了自动关闭PWM输出。 4. 薄膜按键驱动和USB键盘驱动 预留24个GPIO作为薄膜按键的输入，目前的驱动是作为GPIO口来读取的；最好也缴入LINUX的输入事件，按不同的按键发送不同的键值，从event0读取；外接USB键盘驱动最好也从event0读取。 5. 其他GPIO驱动 每个GPIO口都可以通过驱动设置输入/输出。 6. 触摸屏驱动和外接USB鼠标驱动 7. 触摸屏驱动和外接的鼠标驱动设备文件最好固定，例如触摸屏固定使用event2，USB鼠标固定使用event3。 ENGLISH Basic Requirements for Hardwa...
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
JUST Design only: I need a nonfunctional PHP or HTML form based on a concept I have. The form should be beautifully designed and should be able to toggle between light and dark modes. I only need the design. This form does not require a database. - The form should be designed to be versatile and multiple types of utility forms - The form should include various fields, including but not limited to Name, Email, Phone number, Address, and Message. - The form should be equipped to handle and incorporate different types of utility forms such as Contact form, Feedback form, Registration form, and Survey form. I will provide you with a mockup of the form; you will be tasked with transforming this concept into a functional form. Most have side admin panel Ideal Skills and Experien...
Specs: Grid Cells select format 1-the color picker: first time open (no previous coclor selected), defaulted luminance to 50%. If previous color selected, default to that color. 2-the selected color needs to be on the button after first selected. 3-a r...picker: first time open (no previous coclor selected), defaulted luminance to 50%. If previous color selected, default to that color. 2-the selected color needs to be on the button after first selected. 3-a radio button (format button appearance) for each format type: backcolor, forecolor, bold, italic, underline. same like color, needs to select and change the cell. 4-the cell select needs to toggle the format on and off. 5-checkbox to save the format between reload of grid data source. Bid with 1-22-333 in you bid to ...
...Commands: The program within the controller coordinates with access control systems, such as induction loops, keypads, RFID readers, or other authentication methods, to permit or restrict entry. All of these methods are connected to one of the ‘Commands’. These commands are divided into following: - O : only starts the opening movement - C : only starts the closing movement - O – S – C : is a toggle function between opening, stopping and closing Position detection: The controller uses feedback from an encoder and two (ore one) limit switches to determine the gate's precise position along the track, ensuring accurate opening and closing operations according to their respective motion curve. Safety protocols: To avoid any risk of crushing between ...
I am in need of a developer who can help create functionality in my project where a checkbox selection In a "Contract of Payment" form will spawn a "Bank Draft Form". Here's what I need: - Create a checkbox that when selected, spawns the Bank Draft Form - I already have the forms designed for this purpose, your task will be to integrate them with the checkbox functionality. I want it to toggle the second form on and off when the checkbox is toggled. - Unfortunately, I do not have the code to accomplish this, so I'm leaning on your expertise to bring this to life. The ideal freelancer for this task should be proficient in Javascript, PHP or any language/library that can deliver this functionality. Knowledge of form creation and manipulation is key.
I'm looking for someone skilled in Blender to create a cartoonish character model for a VRChat avatar. The model needs to be fully rigged and able to support a range of pose changes. Specific customization elements that the character model must include are his guns with shoot effects, which should be a toggle feature, a removable hat and glasses, and a coffin. Experience in creating VRChat avatars is a plus.
...for an Embedded ESP32-C3FH4. ***This is for integration in an existing device that is currently utilizing a ESP32-C3 Supermini Dev Board Key functionalities should include: - Bluetooth connectivity - GPIO pins configuration - ADC Input - USB-C Female Plug - Serial TX and RX IO - Ten (10) GPIO functionalities This blueprint will serve as the basis of a prototype I am developing. As such, I'm seeking to partner with someone who is experienced and proficient in the following areas: ESP32-C3FH4 development and configuration including the following features: - Bluetooth connectivity - GPIO pins configuration - ADC Input systems - USB-C connection. - Serial Comms Please ensure your proposal reflects your ability to fulfil these requirements. Also please do NO...
... Now you move your cursor over the left pane (left pane scrollbar appears) This is exactly how we should implement for b. Scroll bar should be a little thinner, maybe 10-13 pixes when it appears and light gray color - (on all browsers - Chrome, Firefox, Safari and Edge.) - please add comment on the scrollbar color so we can change if we want slight adjustment. c. Provide a small toggle icon at the top (right aligned), same rows as Clear filters, to collapse all search filters on one click and expand all when clicked again. Mouse-over text should show: "Collapse all" "Expand all" depending on what the next click will do. When a filter is selected (and set to something other than default) d) the heading of that filter needs to change to bold, example: if we s...
...possesses advanced technical abilities in circuit design, analysis, and programming microcontrollers, namely with Raspberry Pi. These skills are necessary for the fruitful completion of the project. Key Responsibilities: - Design creativeness is a must as I place an emphasis on compact-sized micro-circuits. - Robustness is critical in order to effortlessly connect to external devices. - Implementing GPIO pins for sensor integration requires comprehensive expertise. - Responsibility includes diagnosing and troubleshooting electrical systems when the need arises. The successful freelancer will ideally have substantial experience in Python as this is the preferred programming tool for this project. The end goal is to develop a smoothly functioning system based on the defined para...
...Functional Requirements Core Functionality: Development of 41 buttons with fixed parameters for changing the layout and size of windows. Capability to work with both individual and multiple tabs. Integration of 5 slider toggles for setting user preferences: Option to duplicate a tab with the ability to open it in a new window. Choice between resizing the entire window or just the tab (primary toggle). Option to hide the URL bar when opening a tab. Option to hide the bookmarks bar. Option to hide the tabs list. Additional Functionality: Discussion and potential implementation of additional features for an additional fee. 4. Non-functional Requirements Performance: The extension should provide a quick response to user commands without significant delay. Usability: The interface s...
...634250+00:00 app[web.1]: 2024-05-09T03:45:06.634615+00:00 app[web.1]: ➜ Local: http://localhost:54801/ 2024-05-09T03:45:06.634700+00:00 app[web.1]: ➜ Network: use --host to expose 2024-05-09T03:45:06.634798+00:00 app[web.1]: ➜ Vue DevTools: Open http://localhost:54801/__devtools__/ as a separate window 2024-05-09T03:45:06.634816+00:00 app[web.1]: ➜ Vue DevTools: Press Alt(⌥)+Shift(⇧)+D in App to toggle the Vue DevTools 2024-05-09T03:45:06.634816+00:00 app[web.1]: 2024-05-09T03:46:05.561388+00:00 heroku[web.1]: Error R10 (Boot timeout) -> Web process failed to bind to $PORT within 60 seconds of launch 2024-05-09T03:46:05.574879+00:00 heroku[web.1]: Stopping process with SIGKILL 2024-05-09T03:46:05.660887+00:00 heroku[web.1]: Process exited with status 137 2024-05-09T03:46...
...need to implement complex formulas that automatically calculate metrics such as client progress, session counts, and other relevant data. Knowledge of Google Sheets scripting may be necessary to achieve desired functionalities. Interactive Elements: The sheets should include interactive features like dropdown menus for exercise selection, checkboxes for session completion, and perhaps buttons to toggle between different data views. Originality: It is crucial that the sheets are built from scratch and not merely copied or slightly modified from existing templates. The end product must be unique and specifically designed to meet the detailed requirements of this project. Candidate Requirements: Proven experience in designing and building custom Google Sheets. Ability to think crea...
I need assistance in fixing a frustrating glitch I've observed on my Shopify store. When customers select different size options for a bottle, the associated image doesn't toggle accordingly. Ideal candidates should: - Possess strong experience in SHOPIFY platform handling, specifically managing and troubleshooting product listing issues. - Have a keen eye for UX/UI details to ensure seamless customer shopping experience. - Be skilled in HTML, CSS, Shopify's Liquid, and JQuery to precisely pinpoint and fix the issue. - Familiarity with debugging across different web browsers. - Excellent problem-solving skills to diagnose the root cause of this glitch. This job will require a meticulous approach to fixing the glitch without causing a disruption to the overall site ...
...sell some or all of their positions. The platform offers multiple trading bot instances like Monza Bot, Sonic Bot, Furiosa Bot, McQueen Bot, and Neo Bot, accessible for enhanced trading efficiency. Settings: Bot aims to provide a hassle-free trading experience by being easy to use. Users have access to customizable settings to tailor the platform to their preferences, including: Announcements toggle for occasional updates. Minimum position value setting to manage portfolio visibility. Auto-buy feature for immediate transactions upon pasting token address. Buttons configuration for personalized dashboard controls during token transactions. Slippage configuration for adjusting buy and sell slippage settings. Overall, Bot offers a robust and user-centric platform for traders to en...
I'm looking for a skilled programmer to add a dark/light toggle icon feature into the documentation section of my website. It's a MERN stack website, and the primary purpose of this feature is to enhance readability. Ideal candidates for this project should: - Have experience with MERN stack - Demonstrate previous relevant work in their proposal Please include samples of your past work in your application. Thank you!
...If (toggle2) ; we can use else statements because we should not be releasing more than one key { Send {Space up} toggle2:=!toggle2 } else If (toggle3) { send, {x up} toggle3:=!toggle3 } toggle:=!toggle if (toggle) { send, {c down} SoundPlay, %A_WinDir%MediaWindows } else { send, {c up} SoundPlay, %A_WinDir%Media } return $SC058:: If (toggle1) { Send {v up} toggle1:=!toggle1 ; or false, but we started with toggle1 is true, so this should be fine } else If (toggle) ; we can use else statements because we should not be releasing more than one key { Send {c up} toggle:=!toggle } else If (toggle3) { send, {x up} toggle3:=!toggle3 } toggle2:=!toggle2 if (toggle2) { send, {Space down} SoundPlay, %A_WinDir%Media } else { ...
I have a simple one page website at that has three bugs: 1) The footer's color is not working. The CSS attempts to set the footer color, but it shows up as white all the time. Could be a html tag issue or a css issue. 2) The Dark Mode / Light Mode selector in the footer mostly works, but the CSS based animation of the toggle switch no longer works. This stopped working the same time bug number one appeared, so they are probably the same bug. 3) Clicking the Dark Mode / Light Mode selector does not always update the cat gif image. Sometimes it works, sometimes it doesn't work. Probably a JS issue. I would like to get these three bugs fixed now. Please only bid if you can fix these right now.
I have a project that requires setting up an 8 Channel Arduino Relay Module and programming it to operate using a basic 4 button hand controller. My Arduino board of choice is the Arduino Uno. For the hand controller, I need different functionalities: - Each button should be able to toggle a specific relay on and off. - Certain buttons should cycle through a sequence of relays. - Some buttons should have the ability to control a combination of relays. Importantly, only 1 relay should be controlled at a time. The ideal freelancer for this project should have a deep understanding of Arduino programming, particularly with Arduino Uno, and experience with relay modules and controller setup. Familiarity with creating flexible, customizable controls is a plus.
...If (toggle2) ; we can use else statements because we should not be releasing more than one key { Send {Space up} toggle2:=!toggle2 } else If (toggle3) { send, {x up} toggle3:=!toggle3 } toggle:=!toggle if (toggle) { send, {c down} SoundPlay, %A_WinDir%MediaWindows } else { send, {c up} SoundPlay, %A_WinDir%Media } return $SC058:: If (toggle1) { Send {v up} toggle1:=!toggle1 ; or false, but we started with toggle1 is true, so this should be fine } else If (toggle) ; we can use else statements because we should not be releasing more than one key { Send {c up} toggle:=!toggle } else If (toggle3) { send, {x up} toggle3:=!toggle3 } toggle2:=!toggle2 if (toggle2) { send, {Space down} SoundPlay, %A_WinDir%Media } else { ...
...If (toggle2) ; we can use else statements because we should not be releasing more than one key { Send {Space up} toggle2:=!toggle2 } else If (toggle3) { send, {x up} toggle3:=!toggle3 } toggle:=!toggle if (toggle) { send, {c down} SoundPlay, %A_WinDir%MediaWindows } else { send, {c up} SoundPlay, %A_WinDir%Media } return $SC058:: If (toggle1) { Send {v up} toggle1:=!toggle1 ; or false, but we started with toggle1 is true, so this should be fine } else If (toggle) ; we can use else statements because we should not be releasing more than one key { Send {c up} toggle:=!toggle } else If (toggle3) { send, {x up} toggle3:=!toggle3 } toggle2:=!toggle2 if (toggle2) { send, {Space down} SoundPlay, %A_WinDir%Media } else { ...
...working with PDF forms, with particular expertise in designing form fields. A meticulous eye for detail is essential since the fields need to align seamlessly with the existing content on the PDF. 1. Keep the fonts. 2. Keep ½” padding on all sides to accommodate the frame. 3. Can “Hot Buy!” and “In-Store Sale” be any larger? 4. Toggle “Hot Buy!” in the header with “In-Store Sale”. 5. Toggle the logo between a Green Acres logo and a Hughes logo (I can send the files). 6. Toggle the red background with a green background. This goes hand in hand with Hot Buy! (always red background) and “In-Store Sale” (always a green background). 7. Product name: a. Keep the size b. Keep the font c. Keep the fi...
...protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programming (present in CMIO) • USB 3.0 (present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) • HDMI to LVDS signal + backlight • AIS class B • Other UART inputs with optocouplers (to be decided) • GPS • GPIO ports accesss via male connector (compatible with Raspberri Pi) These are the main requeriments, maybe other minor will appear during the design. I can provide schemas for all the parts involved (can bus, LVDS, AIS,...). The job consist in the design of the board merging all schemas in one, and generate all the files needed ...
...Someone who has had previous experience programming the FPGA DEO Nano development board would be a perfect fit, as that's what I am specifically working with. I am using VHDL to code for the EP4CE22F17C6N board. The base of my project, using a state machine, has already been created. As far as the hardware end of things, I've already prepared the circuit diagram and have started with LED lights and toggle switches. But I do need to make some changes in it as the requirement in order to make it more complex for that I need someone who can do the following additions or changes in the project that I have attached in my zip folder to work exactly as described in the following ; 1) For standard operation the traffic light system will be 5 minutes green light, 45 seconds ye...
I need a website where users can create accounts that serve both buying and selling purposes. The idea is to allow users to toggle between buyer and seller functionalities within a single account. Key Features: - User Accounts: Buyers and sellers can easily create accounts on the platform. - Account Switching: The platform should allow users to seamlessly switch between buyer and seller roles. - Payment Integration: The website needs to support credit card, debit card, PayPal and bank transactions. The ideal freelancer for this project should have experience in: - E-commerce platform development - User account management - Payment gateway integration Please include any relevant past work in your proposal.
I have a silver choker necklace with a toggle clasp that needs fixing. The clasp currently shows when turned around my neck and I'd like it adjusted so it stays hidden. also there is a light reflected above my upper lip that i want removed Ideal skills for this job include: - Jewelry repair experience, particularly with silver materials - Understanding of choker necklace design and structure - Proficiency in adjusting toggle clasps Understanding the aesthetic element is crucial for this task— it's not just about function, but also maintaining the seamless look of my necklace.
...problem-solving skills to deliver a unique gaming experience. Create a Java platfomer game from scratch(not using a game engine) that is similar to Mario in mechanics, sound, enemies(the amount of enemies should increase exponentially with each level), pause screen etc. It will also have 3-4 levels. The last level should be similar to a boss level game. Pause and Resume Functionality: Implement a toggle to pause and resume the game using a key press (like 'P'), which will stop the game timer and any media playback until resumed. Collectibles and Power-Ups: * Introduce collectible items or power-ups that the player can pick up for extra points, health boosts, or special abilities. * Level Themes and Backgrounds: * Design different themes for each level, including uniqu...
We need an Android application that can manage hotspot settings without launching the system settings UI. The app should be compatible with Android 14 and Pixel 6a. Kotlin preferred. Key Features: - Change Hotspot Name & Password: The app should allow the user to change the Hotspot Name and Password. - Activate/Deactivate Hotspot: Users should be able to easily toggle the Hotspot on or off within the app. Permissions Handling: - The app should request the necessary permissions (e.g. location, network) on startup. The user should not have to manually enable these permissions through the system settings. Design Theme: - The app should have a minimalist and modern design. The user interface should be clean, intuitive, and visually appealing. Ideal Skills and Experience: - Prof...
Website development - Wordpress & Elementor Pro 1. Remove "Login/Register": Eliminate the "Login/Register" option from the site. 2. Language Switching: Implement a language toggle on the website, enabling switching between English and Swedish across all pages, including the webshop and shopping cart. 3. Mobile Cart Addition: Add a shopping cart icon and functionality to the mobile version of the site. 4. Shop Page Categories: Organize the Shop page by adding categories on the left sidebar to separate items instead of displaying them all together. 5. Currency Format Change: Modify the format of the currency display on the webshop. 6. Improve Readability: Change the color of headings and text beside products to enhance readability on Shop pages. 7. Layout Modif...
...need of a skilled C++ Developer who specializes in native cross-platform MCUs firmware and software development. Our ideal candidate would primarily help us develop a Windows, Linux, and macOS compatible monitoring system, specifically for voltage. The goal is to create a GUI application with specific features. These include: - Real-time monitoring - Graphical representation - Data logging - GPIO MCU ON/OFF control - Voltage and current real-time transfer to PC via USB-connected MCU SAMD21 This calls for not only proficiency in GUI application development, but also a demonstrated understanding of working with real-time data transfer systems. Real-time voltage monitoring and the know-how of system-level development will be crucial to this particular project. If you've d...
...will be show the endorsement given by the content creator users, also can be ID verify. 2. Tier 2 Free: They will have access to see the content creator users profiles, they are not verify and the info provided is optional. 1. Unique landing page for all the US country where show a map and can be selected the state. (This will have a toggle bottom that will change between the content creators that are in this location currently and the other toggle will be to show the upcoming content creators that are planing to come to this location soon -next 14days-) This page will have 6 banner placements that the content creator users can bid to win. The rest of the user profiles will be displayed under those banners in smaller size and the fans can swipe left and right wh...
...and display the variance in currency value. The project is quite urgent and I need it to be completed ASAP. Key Requirements: - Create a tabular representation of my actual expenses vs the... - Develop a similar tabular representation for my budgeted expenses - Calculate the variance between the two in currency value - Display the variance in a clear and visually appealing manner - be able to toggle between different cost centres - be able to select data from different months Ideal Skills and Experience: - Advanced Excel skills and experience in creating financial spreadsheets - Familiarity with financial data analysis and budgeting - Attention to detail and ability to accurately calculate and display variances This project is quite straightforward but needs to be done accurat...
...setup, such as loading preferences and establishing connections. ### **Home Screen** **Overview:** - Acts as the command center, showing nearby fuel stations in both list and map formats. **Features:** - **Search Bar**: Enables users to search for stations by location or fuel type. - **Fuel Type Filters**: Filters for selecting stations by fuel type, such as petrol, diesel, or LPG. - **View Toggle**: Users can switch between a list view and a map view. - **Real-Time Updates**: Displays current fuel prices, ensuring the data is always up-to-date. ### **Station Details Screen** **Overview:** - Provides comprehensive details about a selected fuel station. **Features:** - **Station Information**: Name, brand, and address. - **Price List**: Updated prices for various fuel types ...
1. Need to Designer a Toggle for Website Version Switch 2. Needs to be wordpress friendly 3. Should be over a popup
...Manage Subscription plan: types of plan monthly or yearly subscription or depends on quota - Building Subscription plans For the backend (BE) - Building Subscription plans For the frontend (FE) Manage Subscription: Subscription plan status - Activate the subscriptions status once the payment is done and attach the subscription plan - De-activate the subscription status once the period is done Toggle features related to the subscription for Backend and Frontend: - Redefining the features for depends on the subscription plan for the Recruiter FE/BE - Redefining the features for depends on the subscription plan for the job seeker FE/BE Integration with payment Gateway (Moneris): - Exploring the payment Gateway - Setup and Configuration (Configure sandbox/test environment f...
I need a developer who can integrate the Google Calendar API with my booking platform. The ...manage their bookings, this system will ensure: new booking made through our platform will be automatically synchronized and registered on the vendor's Google Calendar. 2. Bookings made directly on the vendor's Google Calendar, bypassing our platform, will be promptly detected and updated within our system. Optional, but I will need a Calendar UI to display the bookings made: 1. Users can toggle between different views to see the studio's schedules for a specific day, week, or month. 2. Clear visualization of booked slots and available slots. (pending reservation if any) 3. User can hover/click on each slot to view details of the booking. Please message me if you have furt...
...Clean and Organized: Easy to navigate, avoiding clutter and confusion. - Techy/Cool/Fun Elements: A bit of flair for an enjoyable, yet professional look. Functionality: - User-friendly - Clean - Fun/cool to use - Easy to see everything without clutter - Add a profile icon (will be a hover dropdown to edit profile, logout, or switch user) Color Scheme: - Light Version - Dark Version - Toggle icon for switching between "Dark Mode" and "Light Mode" - Submit one or both color schemes Ideal Skills and Experience: - Proven UI/UX design experience, especially in dashboard design - Strong eye for modern visual design - Ability to make complex information visually appealing and easy to understand - Proficiency in tools like Photoshop, Adobe XD, Adobe I...
My website video needs a professional edit. It should provide information about my website in an engagin...needs a professional edit. It should provide information about my website in an engaging way. I prefer a smooth and professional style for the video. Note that I want text overlays included, and I'd like viewers to be able to toggle sounds on and off. The video will be created by using various video clips that will be meshed together seamlessly. Key skills and experience: - Professional video editing skills - Ability to combine video clips creatively - Experience in creating engaging informational videos - Expertise in adding text overlays - Understanding of sound toggle options in video playback. Please share examples of your previous work that demonstrate th...
...Multiplayer) server. The mod involves a small but crucial change to the game's hardcore aspect, allowing for easy toggling between hardcore mode and regular mode. PROJECT DETAILS = = = = - Objective: Modify Minecraft gameplay to toggle hardcore mode on and off seamlessly. - Functionality: When the hardcore mode is activated, players and those they kill are permanently put into spectator mode, except for using commands. - The toggle switch is in the form of 'canon off' and 'canon on' buttons, with 'on' activating the hardcore aspect. - All players should be able to toggle between modes without accessing creative mode. - Hardcore mode operates irrespective of the activity status of the killed player. - Deliverables: - Fu...
I'm seeking an experienced PCB designer to develop a custom ATSAMD21 Micro PCB board. - A USB interface, specifically pin header for most GPIO and USB D lines. - 10+ GPIO pins required for this project. The ideal candidate should have prior experience working with ATSAMD21 Micro PCB boards as well as an understanding of USB interface technology. Proficiency in board design and a keen eye for detail will be crucial for success in this job.
We are seeking an experienced PCB designer to develop a custom printed circuit board for a Raspberry Pi 4 Model B application. The project requires integrating specific components and ensuring the design can be enclosed within a standard industrial box. The successful applicant must have experience with power management and GPIO pin utilization. Key Requirements: - Experience with Raspberry Pi designs and GPIO pin functions. - Ability to integrate electronic components such as 5V relays into the PCB with high precision. - Familiarity with standard industrial connectors and terminals. This project aims to create a highly functional and reliable hardware system. Only applicants with a strong track record in custom PCB designs and the ability to work to exact specifications s...
...cheat engine that can be used specifically on the PC version of the game Starve.io. (Mac and Windows) The Cheat Engine should ideally have the following features: - Unlimited resources: The ability to have as many resources as needed in the game. - Invincibility: A feature that makes my character invincible in the game. - Duplication: An option to duplicate items for an increased inventory. - Toggle Function for all cheats: I want to be able to activate or deactivate each cheat independently. I would prefer the Cheat Engine to be activated in-game through a menu. The ideal candidate for this job should have: - Experience in developing cheat engines or similar tools. - Proficient in programming languages relevant to creating game cheats. - Understanding of how to make the che...
I need a button on my WordPress blog that filters posts based on their 'Expired' or 'Ongoing' status. The posts should be displayed alongside others, but with clear status labels. Key Requirements: - The filter button should allow users to toggle between 'Expired' and 'Ongoing' posts. - Posts should be displayed mixed with others on the homepage. - The status of each post should be clear to users. - The 'Expired' or 'Ongoing' status of a post should be automatically updated based on a set date. Ideal Skills: - Proficiency in WordPress development. - Experience with creating custom filters and buttons in WordPress. - Solid understanding of UI/UX design principles. - Strong communication skills for project updates.
I'm in immediate need of a professional to help refactor the styling of my existing React component, matching the designs as shown in the attached image. The task has to get done ASAP, signifying preference for a fast, s...to help refactor the styling of my existing React component, matching the designs as shown in the attached image. The task has to get done ASAP, signifying preference for a fast, skilled, and highly responsive individual with proven expertise in web design (React/Sass). Please submit samples of past works to back your application. The bulk of the work is done for this component. It is a switch/toggle component that has three different states (default, hovered, disabled) and most of the work will be around updating how the switch component looks when it's...
I'm looking to upgrade my current ESP8266 controller to an ESP32 C3 Mini controller. I am primarily interested in freelancers with specific experience in this upgrade. Here's what I need: Requirement -1 : 1. Update existing Master Controller board based of ESP8266 to support ESP32 C3 IPEX/ (EasyEDA PCB design) 2. Retain GPIO connections and other circuits and components. 3. Ensure the position of LEDs, buttons and interfaces are as in current design 4. Ensure that the device supports handling loads upto 3A total without any heat with each port support upto 1 A Requirement -2 : 1. Redesign existing Zone Expander PCB board from Eagle to EasyEDA 2. Add LED Power indicator option 3. Ensure that the Expander handle upto 3A without any heating and each port handles upto 1A
