Hello. We need someone to translate a Japanese description into Chinese. This is Product Description of Japanese Electronics that will be used on our E-Commerce site. Therefore, anyone who can write Marketing, Advertising, Sells Writing, and promise to keep this project secret is welcomed. 你好。 我们需要自由工作者把产品说明从日语翻译成汉语。 需要进行翻译的是我们即将在自己的网店使用的日本电子产品说明。 我们欢迎所有擅长营销写作，广告写作，宣传写作，并且保证不向第三方透露工作内容的自由职业者！
...presentation about chaos engineering and incident management specifically for a .Net driven distributed monolith. Key points include: - The purpose of the presentation is to educate stakeholders and instigate a beneficial scenario discussion, leading us on a path to implementation. - The target audience has an intermediate understanding of chaos engineering and incident management, hence the presentation should be calibrated to this level. - The presentation will heavily emphasize on the practical aspects of chaos engineering and incident management. Focal themes would be implementing chaos engineering, simulating incidents, and strategies for mitigation. To ensure a successful project, you ideally should have: - Past experience and robust understanding of...
Handwritten/Manual Structural Engineering Calculations for concrete water tank and steel warehouse.
We are seeking a highly skilled and creative logo designer with a strong portfolio in brand identity development, ideally with experience in 4A (AAAA) advertising. Our brand focuses on cutting-edge consumer electronics, and we require a logo that reflects our innovative spirit and market positioning. Key Requirements: Brand Identity: Design a logo that serves as the cornerstone of our brand’s identity. The logo must be distinct, memorable, and clearly differentiated from competitors. Versatility: Ensure the logo is adaptable for various applications, including physical products,digital platforms, print materials, business cards, and other stationery. Alignment with Vision: The logo should resonate with our brand’s vision and slogan, encapsulating our commitment to high-...
I'm aiming to develop a physical product intended for commercial use within the food and beverage industry. A good understanding of wiring circuits and plastic moulding is important for this project. This is a one off design project. Skills and experience required: - Experience in electrical wiring work The success of this product will largely depend on its usability in the retail environment.
...• Seamless integration with access control systems: I wish to automate the access system in my shop, hence the PCB controller must be compatible with modern digital access mechanisms. • Door sensor compatibility: The controller should also connect flawlessly with door sensors, to monitor and log the opening and closing activities. The ideal freelancer for this task should have expertise in electronics, PCB design, and have a track record of developing similar high-tech automation systems. Knowledge and experience in security systems integration will be an added advantage. I appreciate someone who can not only execute the task but also advise on potential improvements to the system....
I am in need of an exper...Blueprints: The project also includes creating detailed blueprints and technical drawings, which will include features such as electrical wiring and furniture placement. This project would particularly suit a freelancer with the following skills: - Proficient in AutoCAD: The ideal candidate is highly skilled and experienced with AutoCAD, capable of generating complex, accurate technical drawings and blueprints. - Understanding of Architectural Standards: The freelancer should be capable of following and implementing architectural standards during the 2D drafting and design process. - Experience in Electrical Layout and Furniture Placement: Prior experience in incorporating electrical wiring and furniture placement into technical drawings is ...
I am looking for a skilled Autocad professional to create detailed interior design drawings for my project. I already have existing plans and measurements that need to be incorporated into the drawings. The drawings should be highly detailed with annotations to ensure accuracy. The ideal candidate should have experience in interior design and Autocad.
Engineering Background Content Creator Required For Tech Related Topics
I am seeking an expert in marine engineering or naval architecture to perform an in-depth buoyancy calculation for my medium-sized (20-30 feet) fishing charter boat. The boat is designed primarily for fishing charter purposes and needs to support a medium load capacity (4-8 people). Your task will include: - Calculation and analysis of the boat's buoyancy with medium load - Providing a detailed report on the boat's load capacity, stability, and safety Applicants should have significant experience in boat design and naval architecture, with a strong understanding of buoyancy principles. Your background knowledge, talents, and precise calculations will be crucial in ensuring that our fishing boat is safe, stable, and ready for an exciting fishing adventure. Please pre...
I'm looking for an expert machine software engineer who can proficiently integrate software with hardware. Key tasks: - The successful freelancer will be required to integrate software with an industrial control system and Programmable Logic Controllers (PLCs). Ideal skills and experience: - The ideal candidate will have considerable experience in machine software engineering, with a focus on software and hardware integration. - In-depth understanding and hands-on experience with industrial control systems and PLCs are crucial for this task. - Experience with programmable logic controllers (PLC) is particularly critical. We are looking to build a load bank with Canbus or another form of communication protocol that can be controlled from a single location. Software will hav...
I'm currently in the design phase of an electronics project and require an electrical engineer with a specialization in electronics to assist me. Key Tasks: - Design Assistance: I need help with designing various electronic components of the project. This requires high-level knowledge of electronics, particularly on how to integrate circuits and make them work seamlessly. Ideal Skills and Experiences: - Expertise in Electronics Engineering: A deep knowledge of electronics is essential for this role. You should have experience working on similar projects and be able to demonstrate a strong understanding of electronic design principles. - Circuit Design Skills: Experience in designing complex circuits is a plus. You should be able to h...
I'm in need of an expert in digital electronics to assist in a project of mine. The specifics of the project, including whether it involves circuit design, PCB layout, or microcontroller programming, we can discuss in further detail. Key requirements: - Proficient with digital electronics and related technologies - Experience with either circuit design, PCB layout, or microcontroller programming - Ability to collaborate effectively and share project files as needed Your role will be instrumental in the success of this project, and I am looking for someone with a proven track record in this field. Let's connect and discuss the project further.
I need an expert in space mission plotting who can create trajectory plots pertaining to a hypothetical space mission. The project revolves around producing ca...provide details on the mission’s complete orbital trajectory. Key Project Requirements: - Develop trajectory plots for the mission, highlighting details of our journey between planetoids. - A knack for making figures that optimize understanding for viewers, even with an untrained eye to space exploration details like the figure attached. Ideal skills and experience: - A background in Aerospace Engineering or related fields. - Proven experience with trajectory plotting. - Proficient using relevant software to develop accurate and comprehensible figures. - Knowledge and interest in space explorations and planetoids,...
...create an eye-catching partial van wrap design for my electrical services company. Key Deliverables: - Create a design using the company logo and contact information. The logo will be provided upon project commencement. - The color scheme of the design should predominantly include blue, black, and white. Ideal Skills: - Strong background in vehicle wrap design or similar projects - Proficient in Adobe Illustrator or similar design software - Excellent creativity and problem-solving abilities - Attention to detail and ability to communicate brand effectively in the design The goal is to create an engaging and professional partial wrap design that effectively communicates our brand and contact information, thereby promoting our electrical services. Please provide a...
I have a 3D model of a consumer electronics enclosure in .STL format. I need a talented designer who can optimize the model with a focus on Design for Manufacturability (DFM). The primary goal is to ensure that the enclosure is not only visually appealing but also structurally sound and manufacturable for Injection Moulding. Key aspects I'm looking to address in the optimization process include: - Material Selection: Recommending the most suitable material for the enclosure considering its end-use and manufacturing process. - Wall Thickness Optimization: Making sure that the walls of the enclosure are neither too thin to weaken its structure nor too thick to waste material. - Assembly Considerations: Ensuring that the design is conducive to easy and cost-effective assembly, p...
I have a listening device in my home, the purpose of which is to capture conversations that occur when I'm not around. No one should be there, and the main content being picked up are these unauthorized conversations. The problem is, the ...an excess of background noise. I'm seeking an audio expert to enhance the audio quality of these captured conversations, eliminating the background noise and making the vocals distinct and clear. The work would exclusively involve improving the audio quality; I don't need a remote monitoring solution at this stage. Ideally, the selected professional will have: - Strong experience in audio engineering - Proven track record in audio quality enhancement - Specific expertise in background noise reduction - Discretion and respect fo...
I am in need of an experienced electrical engineer to assist with spec'ing an electrical system. The system design. -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that...
...STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the specific STM32 model is needed to ensure optimal performance and compatibility. - A background in the chosen application domain (consumer electronics, industrial automation, or wearable devices) would be beneficial. If you've worked on similar projects and are confide...
I'm seeking to upgrade my existing 6.2 kW solar system. I need assistance with redesigning the system by adding four new panels. Additionally, I require the completion of the one-line diagram and approval from both a structural engineer and an electrical engineer.
...creating the circuit for the mentioned components. This includes ensuring the circuit is efficient and functions as intended. - Component selection: I'll require assistance in selecting the right components for the circuit. It's crucial to choose components that are of high quality and fit the project's requirements. The ideal candidate for this job should have a solid background in electronic engineering, particularly in circuit design and component selection. Experience with power supplies, analog digital converters, and relays will be highly preferred. This is an exciting opportunity for a talented engineer to contribute to an innovative project. I have an electronic pcb circuit, it is receiving emc noise. I tried to solve that part by making a 4-layer pcb, ...
I'm searching for a talented and experienced Facebook ads specialist who can help me increase sales for my online shop. Your main focus will be on gadgets, electronics, and home solutions in the United States market. Key Project Details: - The main goal of the ad campaign is to significantly boost product sales. You should be well-versed in creating ad campaigns that drive conversions and generate revenue. - You will be given the task to focus your efforts on these specific product categories: gadgets, electronics, and home solutions. This includes selecting the right ad formats, targeting the ideal audience, and crafting compelling ad copy that can drive interest and sales. Ideal Skills and Experience: - Demonstrated experience successfully running Facebook ad campa...
...car needs to be visually appealing, and project a modern, sleek, and commercial image. - Mechanical and Electrical System Design: We need a team with a strong focus on engineering, able to create systems that are energy efficient and innovative. - Innovations: This is an important aspect of the project. We're looking for a team that can bring fresh ideas to the table, with a particular interest in self-driving capability, voice control assistant, wireless charging, advanced safety features, and an innovative AutoCharging system using the car's tire motor. Ideal freelancers for this project should have experience in: - Industrial design and 3D modeling - Mechanical and electrical engineering, particularly in the automotive industry - A creative and ...
I am seeking an experienced engineer who can assist me in the design and analysis of a new project. Ideal skills and experience for the job: - Proficiency in AutoCAD for design and analysis - Strong background in engineering, particularly in the area of design and analysis - Excellent problem-solving skills - Ability to work closely with me to understand my vision for the project and bring it to life
I'm looking to transform my game videos, which are currently in Full HD format, to weave a captivating story for my viewers. - The initial task involves trimming and removing any unwanted parts from less than 30 minutes of footage. - I want to bring the remaining video clips to life by adding special effects and animations...clips to life by adding special effects and animations to enhance the overall viewer engagement. - Additionally, adjusting audio levels is crucial to provide crystal clear sound and further enrich the gaming experience. Ideal strengths for this project would be technical proficiency in video editing software, a knack for storytelling through visual effects, and a solid understanding of audio engineering. If you have worked on gaming videos before, that w...
Task at hand is to extract vocals from a highly distorted audio file OF APPROXIMATELY 8 MINUTES. I DO HAVE OTHER FILES I WOULD LIKE DONE AS WELL, IF EXTRACTION IS SUCCESSFUL. As a client, my ultimate target is related to:...crucial. - The file is from a criminal setup with the audio of a father setting up his son; thus every word could change the narrative. The audio clip has been intentionally distorted over crucial conversation. Do whatever it takes to make the conversation extremely clear irrespective of the overall audio quality. Those offering skills and experience in forensic audio analysis, audio software engineering will ideally match the job requirements. Familiarity with spectrogram analytics and noise reduction techniques would be a plus point. There is urgency to th...
...in finding trending electronics in China for my online shop. Key Requirements: - **Product Type**: Electronics - **Sales Channel**: Third-party platforms (e.g., Amazon, eBay) - **Key Focus**: Innovativeness Your role will be to source electronics that are both technologically innovative and in high demand. Your responsibilities will include: - **Product Research**: Identify trending electronic items in China that have a high potential for success in western markets. - **Supplier Qualification**: Evaluate and establish relationships with reliable Chinese suppliers. - **Cost Analysis**: Negotiate cost-effective deals without compromising on quality. The ideal candidate should: - Have a keen eye for spotting innovative products - Be experienced in sourcing ele...
I am seeking an experienced LT Spice expert to assist with the design and simulation of a half-bridge circuit to drive an ultrasonic cleaner load, 60W, 39kHz, and 10R impedance. I have an LT spice model that needs to be updated to meet the requirement. The floating side needs to show a square wave and...gate driver is UCC28086D, and the isolated gate driver UCC21550BQDWRQ1. It would be good to use parameters from these components where applicable for a representative test. For example, changing the MOSFET to the one with low Rds On - Drain-Source Resistance will give square output at the section labeled square wave. I have also attached the type of transformer Skills: - LT Spice - Power electronics - Simulation - Troubleshooting Delivery time is within 20th May evening (IST) Kin...
...have a set of hand-drawn electrical schematics on paper that I need to convert into electronic format. The goal is to create a basic layout for documentation purposes. I'm looking for a freelancer with a strong understanding of electronic schematics and the ability to accurately translate hand-drawn diagrams into digital form. Key deliverables: - Conversion of hand-drawn schematics into an electronic format - Basic layout only, without the need for detailed components labeling - Ensure the final electronic schematics are clean, clear, and easy to understand - Ensure the final schematics are files that can be editable in AutoCAD Ideal skills and experience for this job include: - Proficiency in AutoCAD electronic design software - Strong understanding of electrical ...
I am in search of a skilled KNX engineer to design a comprehensive home automation solution for a 4 room apartment. Key Requirements: - The scope will involve creating an AutoCAD file, a wiring plan, and a 2D structure for the...the architecture plan. - You must also provide a list of quantities. Specific Features & Functions: - The automation project should include lighting control and temperature control. Integration: - There is no need for voice control or mobile app integration. Scalability: - The system should be designed to be scalable for future upgrades or additions. Ideal Skills: - Proficiency in KNX engineering with a portfolio demonstrating similar projects. - Strong AutoCAD skills. - Ability to design for scalability and future-proof the system for potenti...
I am seeking the expertise of a professional engineer to create 2 sets of stamped engineering plans for a 7-10k elevator boat lift. The desgin should incorporate: - 20 degree angle lift secured to a seawall, indicating a balance of strength and flexibility. - Weight capacity between 5,000 - 10,000 lbs, to cater to a diverse range of boats. The ideal candidate should have: - Extensive experience in marine engineering - A proven track record with designing boat lifts - Familiarity with the local codes and regulations in Pasco County. For a smooth working relationship, the ability to respond promptly to queries and meet deadlines is crucial. Detailed and clear communication is also essential.
I'm seeking a skilled robotics engineer to simulate basic robotic movements in Gazebo. My project's scope includes: - Engineering a robotic system to perform automated maneuvers. - Implementing basic movements such as forward motion, turning, and stopping. Your expertise should ideally include: - Proficiency in robotics engineering inclusive of controller expertise and Gazebo simulation. - Familiarity with automated systems and their movements. I anticipate this project to be less complex but I demand accuracy in basic functions.
I'm in the process of developing a new power electronics product for industrial use. The current stage of development is in the prototype phase. For this project, I need a skilled professional who can help me with the following: - PCB Prototyping: I require assistance with the creation of the PCB for this new product. This includes the manufacturing of the board itself. - Creation of Test Plans: I need an expert who can help me create comprehensive test plans for this new product. This includes both hardware and software testing. Experience in creating test plans for electronics, would be highly beneficial. - Final Testing & Validation: Once the PCBs are produced and the test plans are in place, I would need a professional who can assist me in the final testing ...
I am in need of a freelance coder well-versed in Lua and experienced with IceSL. The task involves: - Developing a custom Lua script that can generate a 3D model. - The 3D model in question is a gear coupling. - The gear coupling is designed to be used fo...Engineer - Proficient in Lua scripting language. - Experience with IceSL for 3D modeling. - Understanding of mechanical components - specifically gear coupling design and its function in power transmission. - Ability to generate an accurate and efficacious model for power transmission requirements. This task requires an understanding of code as well as a foundational knowledge of mechanical engineering principles. If you possess these skills and experience, I'd love to hear from you. Please include any relevant work in...
...the Properties panel. The addon should have the following features: User Interface The addon should have a search bar for quick searching Two main categories: Textures and Models Subcategories for different texture types (e.g. metal, wood, plastic, fabric, stone, concrete, leather, glass, ceramic, rubber) Subcategories for different model types (e.g. cars, interior, nature, food, furniture, electronics, appliances, weapons, clothing, jewelry) Each texture and model thumbnail should display a preview image and name Texture and Model Functionality Textures should be draggable and droppable onto objects in the 3D viewport to apply the texture Models should be draggable and droppable into the 3D viewport to import the model directly into the scene For each texture and model, there sh...
...responsive. **Key Responsibilities:** - Design and build advanced applications for both iOS and Android using frameworks like Flutter. - Work alongside other teams to define, design, and deploy exciting new features. - Focus on application performance and user experience. - Maintain high standards of code quality and push for continuous improvement. **What You Need:** - BS/MS in Computer Science, Engineering, or related field. - 2-3 years of full-stack development experience, with significant focus on mobile apps. - Strong proficiency in Flutter or similar, front-end technologies (HTML5, CSS3, JavaScript), and backend development (Node.js, Django). - Experience with databases (SQL & NoSQL), cloud services (AWS, Google Cloud, Azure), and versioning tools like Git. **Why Joi...
I'm seeking an expert in designing and prototyping to help bring my innovative concept in the field of industrial electronics to life. Key tasks include: - Refining the initial design sketches: The product is in the initial design sketch stage, and I require someone who can take the concept and develop it into a detailed, workable design. - Prototyping: The next step will be developing a prototype. The ideal candidate will have experience in taking designs through to this stage, and will be able to advise on the most effective and efficient way to do this. The freelancer most suitable for this job will have experience in: - Industrial or electronics design and prototyping: It is essential that this individual has a strong track record of success in designing and proto...
I'm seeking a proficient English expert who specializes in reviewing academic texts, particularly within the scope of Science and Engineering. My aim is to ensure that my work is free of errors, easy to understand and meets the highest academic standards. Key Responsibilities: - Review and correct my English writing - Enhance clarity and improve sentence structure Ideal Skills: - Strong command of English language - Excellent grammar, punctuation, spelling, and vocabulary knowledge - Experience in academic writing, particularly in the field of Science and Engineering is a must - Proficiency in technical language related to Science and Engineering is desirable Please include examples of your previous work in academic editing, especially in related fields. I am ...
I need a skilled aerospace engineer who could provide critical assistance for an aerospace design project I'm currently workin...to the project - Deriving concepts based on the information provided - Using MATLAB to conduct an aerodynamics analysis The main focus of this project is to improve the aerodynamics of the aircraft, which ultimately aims to enhance the overall efficiency and performance. This is a time-sensitive task, so I'm in need of someone who can deliver within the same day. Ideal Skills: - Aerospace engineering background - Proficiency in MATLAB for aerodynamics analysis - Strong problem-solving and concept development skills - Ability to work under tight deadlines Your expertise will be crucial in ensuring the success of this project. I look forward to ...
As a communications engineer needing assistance with Natlab programming, I require a professional, preferably with a background in my field, to convert and integrate specified intermediate-level algorithms into MATLAB code. The project will entail the following: - Familiarizing yourselves with the existing code. - ...existing code. - Converting given algorithms into MATLAB code. - Implementing the newly created MATLAB code into the existing code. Ideally, you should have a solid grounding in debugging, performance optimization, and feature implementation. This role needs an individual with a keen eye for detail and an understanding of the inner workings of the Natlab program, especially in communications engineering. Previous experience with similar projects would be an added ...
We're an engineering company in need of a new logo design that retains our original green color but with a new look. The main focus of the logo should be our company name. Key requirements: - Style: The logo should have a new look aesthetic, which can be achieved through the use of typography and design elements. - Green color scheme: We want to maintain the same green color from our previous logo. - Company name: The main element to include in the new logo is our company name. Ideal skills and experience: - Strong understanding of color theory and ability to work with specific color requirements. - Excellent typography skills to create a visually appealing and professional logo.
...practical. - Skatepark Construction: You'll be overseeing the construction of these facilities, ensuring they're built to a high standard. - Production Process Management: You'll be handling the production process for the skate facilities, ensuring they're manufactured efficiently and to spec. Ideal Candidate: - Spoken and written fluent English - Proven experience in industrial and mechanical engineering, particularly in product design and manufacturing process management. - Previous experience in the skatepark industry or similar outdoor sports facilities would be a significant advantage. - Strong understanding of design principles, production processes, and quality control. - Excellent project management skills to be able to oversee the entire process from...
I am excited to apply for the part-time Software Developer position. As a third year computer engineering with solid background in both front-end and back-end development, I am confident in my ability to contribute effectively to your projects. Technical Skills and Expertise Front-end Development: Skilled in HTML, CSS, and JavaScript, with experience in and Tailwind CSS. I focus on creating responsive and visually appealing user interfaces. Back-end Development: Proficient in Python and Node.js, with a track record of building robust APIs and microservices. Database Management: Experienced with MySQL and MongoDB, capable of designing efficient database schemas and performing queries. Full-Stack Development: Able to integrate front-end and back-end systems seamlessly, handling state
I'm in need of an expert in ANSYS software to perform a range of structural and/or thermal analysis tasks that are essential for my product development. Key Requirements: - Experience in ANSYS: As my ideal freelancer, you should have a s...Plastics, FRP, Composite Your Role: Your primary focus will be to simulate the various tests required and to present the results in a clear and understandable manner. Your professional input on how to improve the design based on the analysis results is also welcomed. Ideal Freelancer: - Proven experience with ANSYS for structural analysis. - A background in product testing for structural engineering along with thermal analysis is a plus. - Clear communication skills to present complex findings in an understandable way. Thanks and Regar...
I'm seeking a skilled and experienced designer to assist in a project related to manufacturing machinery. Specifically, I'm in need of: - Creative and functional designs for my proposed machinery - Knowledgeable input and advice on manufacturing process optimization - Ideas for system int...manufacturing machinery. Specifically, I'm in need of: - Creative and functional designs for my proposed machinery - Knowledgeable input and advice on manufacturing process optimization - Ideas for system integration This will require understanding of the industry, manufacturing process, machinery operation, and system integration. An ideal candidate will have a strong background in mechanical engineering, industrial design or a relevant field, with experience in machinery ...
...deliver the product from China till our clients doorsteps in GCC countries. - Efficient Handling Of Electronics & Clothes: You should be well-versed in handling electronic goods and clothes to ensure they reach their destination in optimal condition. - In-Depth Knowledge Of GCC Customs Regulations: You should be familiar with the customs regulations of Saudi Arabia, United Arab Emirates, Bahrain, Oman, Qatar, and Kuwait to ensure the smooth passage of the shipments. Ideal Candidate: - Proven experience in logistics and shipping, particularly with air freight. - A strong network in the logistics industry to secure competitive air-shipping rates. - Prior experience in handling electronics and clothes, with a clear understanding of the fragility of such goods. - Famil...
...mission of empowering students and professionals through high-quality education and training. Here are the key elements we would like the logo to reflect: 1. **Inspiration and Empowerment**: The logo should evoke a sense of inspiration, hope, and empowerment. 2. **Educational Excellence**: Highlight our focus on cutting-edge technology and comprehensive education in Science, Mathematics, and Engineering. 3. **Modern and Professional**: The design should be sleek, modern, and professional, appealing to students, parents, and corporate partners. 4. **Simplicity and Clarity**: Ensure the logo is simple, clear, and easily recognizable. 5. **Colors**: Use a color scheme that is vibrant yet professional. Consider colors that symbolize knowledge, growth, and innovation. 6. **Versatilit...
...Responsibilities: - Designing and implementing effective irrigation systems tailored for a 5-20 acre walnut orchard - Developing and executing strategies for pest and disease control in walnut trees - Implementing machinery and equipment for efficient farm operations - Provide consultation and strategies for improving overall nut quality Skills and Qualifications: - Proven experience in agriculture engineering, particularly with walnut tree management - Proficiency in irrigation systems design and implementation - Strong knowledge of farm machinery and equipment - Expertise in pest and disease control in orchards - Ability to strategize and implement effective solutions to improve nut quality - Prior experience with medium-sized orchards (5-20 acres) is a plus If you're an...
I'm in need of a short 15-20 second video that will feature a series of special effects. The video should have an electrical effect added to it, and then a lighting effect. In the electrical effect, I'd like to see somthing like staight lightning bolts, electric sparks, and flickering lights. For the lighting effect, the video should feature a spotlight effect on where the light is hitting. I'm looking for a talented and experienced video editor who has a strong background in creating and integrating special effects. Ideal Skills and Experience: - Proficiency in video editing software, particularly for special effects - Demonstrated experience with lightning bolts, electric sparks, flickering lights, and spotlight effect - Ability to create a short 15-20...
